Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual Safety Child seats

106SafetyDo not sit with the upper part of the body any nearer to the door than necessary.The vehicle's front door panels include side impact sensors.A damaged door or any unauthorised or incorrectly executed work (modification or repair) on the front doors or their interior trim could compromise the operation of these sensors - risk of malfunction of the lateral airbags!All work must be carried out only by a PEUGEOT dealer or a qualified workshopCurtain airbagsDo not fix or attach anything to the roof, as this could cause head injuries when the curtain airbag is deployed.Do not remove the grab handles installed on the roof, as these help to secure the curtain airbags.Child seatsThe regulations on carrying children are specific to each country. Refer to the legislation in force in your country.For maximum safety, please observe the following recommendations:–In accordance with European regulations, all children under the age of 12 or less than 1,5 metres tall must travel in approved child seats suited to their weight, on seats fitted with a seat belt or ISOFIX mountings.–Statistically, the safest seats in your vehicle for carrying children are the rear seats.–Children weighing less than 9 kg must travel in the "rearward facing" position, whether in the front or rear of the vehicle.It is recommended that children travel on the rear seats of the vehicle:–‘rearward facing’ up to the age of 3,–‘forward facing’ over the age of 3.Make sure that the seat belt is correctly positioned and tightened.For child seats with a support leg, ensure that the support leg is in firm and steady contact with the floor.An incorrectly installed child seat in a vehicle compromises the child's safety in the event of an accident.Ensure that there is no seat belt or seat belt buckle under the child seat, as this could destabilise it.Remember to fasten the seat belts or the child seat harness keeping the slack relative to the child's body to a minimum, even for short journeys.When installing a child seat using the seat belt, ensure that the seat belt is tightened correctly on the child seat and that it secures the child seat firmly on the vehicle seat. If the passenger seat is adjustable, move it forwards if necessary.Remove the head restraint before installing a child seat with a backrest on a passenger seat.Ensure that the head restraint is stored or attached securely to prevent it from being thrown around the vehicle in the event of sharp braking. Refit the head restraint once the child seat has been removed.Installing a booster seatThe chest part of the seat belt must be positioned on the child's shoulder without touching the neck.Ensure that the lap part of the seat belt passes correctly over the child's thighs.Use a booster seat with a backrest, equipped with a belt guide at shoulder level.Additional protectionsTo prevent accidental opening of the doors and rear windows, use the "Child lock".Take care not to open the rear windows by more than one third.To protect young children from the sun's rays, fit side blinds on the rear windows.As a safety measure, do not leave:–A child alone and unsupervised inside a vehicle.
107Safety5–A child or an animal in a vehicle which is exposed to the sun, with the windows closed.–The keys within reach of children inside the vehicle.Child seat at the rearRow 2Forward-facing or rearward-facing►Move the vehicle's front seat forward and straighten the backrest so that the legs of the child in the forward-facing or rearward-facing child seat itself do not touch the vehicle's front seat.►Check that the backrest of the forward-facing child seat is as close as possible to the backrest of the vehicle's rear seat, and ideally in contact with it.►Adjust the rear seat (in row 2) to the fully back longitudinal position, with the backrest straightened.Ensure that the seat belt is correctly tensioned.For child seats with a support leg, ensure that the support leg is in firm and steady contact with the floor. If necessary, adjust the vehicle's front seat.Row 3If a child seat is installed on a passenger seat in the third row, move the seat to its rearmost longitudinal position with the backrest straightened, so that the child seat and the child's legs do not touch the seats in the second row.Never fit a child seat with a support leg in the third row.Child seat at the front►Adjust the front passenger seat to the highest and fully back longitudinal position, with the backrest straightened."Forward facing"You must leave the front passenger airbag active."Rearward facing"The front passenger airbag must be deactivated before installing a rearward facing child seat. Otherwise, the child risks being seriously injured or killed if the airbag is deployed.
108SafetyWarning label - Front passenger airbagYou must comply with the following instruction, as reminded by the warning label on both sides of the passenger sun visor:NEVER use a rearward facing child restraint on a seat protected by an ACTIVE AIRBAG in front of it, DEATH or SERIOUS INJURY to the CHILD can occur.Deactivating the front passenger airbagTo ensure the safety of the child, the front passenger airbag MUST be deactivated when a "rearward facing" child seat is installed on the front passenger seat. Otherwise, the child risks being seriously injured or killed in the event of deployment of theairbag.Vehicles not equipped with a deactivation/reactivation controlInstalling a "rearwardfacing" child seat on the front passenger seat or bench seat is strictly prohibited - risk of death or serious injury in the event of airbag deployment!With the Multi-Flex bench seat or the Crew cab, deactivate the front passenger airbag when transporting long objects.Deactivating/Reactivating the front passenger airbagFor vehicles on which it is fitted, the switch is located on the side of the dashboard.With the ignition off:►To deactivate the airbag, turn the key in the switch to the "OFF" position. ►To reactivate it, turn the key to the "ON" position.When the ignition is switched on:This warning lamp comes on and remains lit to signal deactivation.OrThis warning lamp comes on for about 1 minute to signal activation.
109Safety5Recommended child seatsRange of child seats secured using a three-point seat belt.Group 0+: from birth to 13 kgL1"RÖMER Baby-Safe Plus"Installed in the "rearward facing" position.Groups 2 and 3: from 15 to 36 kgL5"RÖMER KIDFIX XP"Can be fitted to the vehicle's ISOFIX mountings.The child is restrained by the seat belt.Only suitable for installation on the side rear seats.The head restraint on the vehicle seat must be removed.Groups 2 and 3: from 15 to 36 kgL6"GRACO Booster"The child is restrained by the seat belt.Only suitable for installation on the front passenger seat or on the rear side seats.
110SafetyLocations for child seats secured using the seat beltIn accordance with European regulations, the table indicates the options for installing child seats secured using a seat belt and universally approved (c)according to the weight of the child and the seating position in the vehicle.Child weight and age guideSeatsUnder 13kg(groups0 (b) and 0+)Up to about 1 year oldFrom 9 to 18kg(group 1)From about 1 to 3 years old 15-25 kg(group2)From about 3 to 6 years old 22-36 kg(group3)From about 6 to 10 years oldCab/Row 1 (a)With individual seat, passenger seat/With bench seat, outer or central passenger seatWith passenger airbag deactivated "OFF"UWith passenger airbag activated "ON"XUFKey(a) Refer to the current legislation in the country in which you are driving before placing a child in this seat position.(b) Group 0: from birth to 10kg. Carrycots and "car" infant carriers must not be installed on the front passenger seat(s).
111Safety5(c) Universal child seat: child seat suitable for installation in all vehicles using the seat belt.U Seat position suitable for installing a child seat secured using the seat belt and universally approved for rearward-facing and/or forward-facing use.UF Seat position suitable for installing a child seat secured using a seat belt and universally approved for forward-facing use.X Seat position not suitable for installing a child seat for the stated weight class.Child weight and age guideSeatUnder 13kg(groups0 (d)and0+)Up to about 1 year oldFrom 9 to 18kg(group 1)From about 1 to 3 years old 15-25 kg(group2)From about 3 to 6 years old 22-36 kg(group3)From about 6 to 10 years oldRow 1 (a)Fixed passenger seatXPassenger seat with forwards and backwards adjustmentWith passenger airbag deactivated "OFF"U (f)With passenger airbag activated "ON"XUF (f)Row2 (b) (e)URow3 (b) (e)U (g) (h)Key(a) Refer to the current legislation in the country in which you are driving before placing a child in this seat position.(b) To install a rearward-facing or forward-facing child seat on a rear seat, adjust the rear seat to the fully back position with the backrest straightened.(c) Universal child seat: child seat suitable for installation in all vehicles using the seat belt.(d) Group 0: from birth to 10kg. Carrycots and "car" infant carriers must not be installed on the front passenger seat(s) or the seats in row 3.(e) To install a rearward-facing or forward-facing child seat on a rear seat, move the seats in front of it forward, then straighten their backrests to allow sufficient room for the child seat and the child's legs.
112Safety(f) With the fixed passenger seat (which cannot be placed in the folded position), adjust the backrest angle to 0°.For more information on the Front seats and, in particular, the folded position for the backrest, refer to the corresponding section.(g) On the Standard version, fold down the backrests in row2.(h) Installing child seats with a support leg is prohibited in the third row.U Seat position suitable for installing a child seat secured using the seat belt and universally approved for rearward-facing and/or forward-facing use.UF Seat position suitable for installing a child seat secured using a seat belt and universally approved for forward-facing use.X Seat position not suitable for installing a child seat for the stated weight class."ISOFIX" mountingsRow 2* On some versions, the central seat is not equipped with ISOFIX mountings.The vehicle has been approved in accordance with the latest ISOFIX regulation.If fitted on the vehicle, the regulation ISOFIX mountings are identified by labels.There are three rings for each seat:–Two front ringsA, located between the vehicle seat backrest and cushion, indicated by an "ISOFIX" marking,–If fitted to your vehicle, a rear ringB, located behind the vehicle's seat, called Top Tether, for securing the upper strap, indicated by a "Top Tether" marking.The Top Tether secures the upper strap of child seats fitted with them. In case of frontal impact, this device limits the extent to which the child seat can tilt forward.This ISOFIX mounting system provides fast, reliable and safe fitting of the child seat in the vehicle.The ISOFIX child seats are fitted with two latches which are secured on the two front ringsA.Some child seats also have an upper strap which is attached to rear ringB.To secure the child seat to the Top Tether:–remove and stow the head restraint before installing a child seat on this seat (refit it once the child seat has been removed),–pass the strapof thechild seat over the top of the seat backrest, centring it between the openings for the head restraint rods,–attach the hook of the upper strap to rear ringB,–tighten the upper strap.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131