Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual Practical information Roof bars / Roof rack

189Practical information7OperationThe weight on board your vehicle is measured:►When the engine starts, automatically.ON►When stationary, by pressing this button in the loading area. The system is then active for 5 minutes.Display of the measurement in the loading areaONIf the weight on board the vehicle is nearly up to the maximum authorised value, the indicator lamps of these buttons come on.ONIf the weight on board the vehicle exceeds the maximum authorised value, the indicator lamps of these buttons come on.Display of the measurement on the instrument panelIf the weight on board the vehicle exceeds the maximum authorised value, this indicator lamp comes on.MalfunctionDisplay of the malfunction in the loading areaAfter the measurement is triggered from the loading area, the LEDs of the 3 buttons flash simultaneously for about 3 seconds and then go out.Consult a PEUGEOT dealer or a qualified workshop.Information displayed on the instrument panelThese warning lamps come on, together with a message.Consult a PEUGEOT dealer or a qualified workshop.Roof bars / Roof rackRecommendationsDistribute the load uniformly, taking care to avoid overloading one of the sides.Arrange the heaviest part of the load as close as possible to the roof.Secure the load firmly.Drive gently: the vehicle will be more susceptible to the effects of side winds and its stability may be affected.Regularly check the security and tight fastening of the roof bars and racks, at least before each trip.Remove the roof bars once they are no longer needed.In the event of loading (not exceeding40 cm in height) on the roof, do not exceed the following loads:–Transverse bars on longitudinal bars: 80kg.–Two transverse bars bolted to the roof: 100kg.–Three transverse bars bolted to the roof: 150kg.–An aluminium rack: 120kg.–A steel rack: 115kg.If the height exceeds 40cm, adapt the speed of the vehicle to the profile of the road to avoid damaging the roof bars or the roof rack and the fixings on the vehicle.Refer to national legislation in order to comply with the regulations for transporting objects that are longer than the vehicle.
190Practical informationIn the event of loading a 7-seat model (not exceeding 40 cm in height) on the roof, do not exceed the following loads:–Three transverse bars bolted to the roof: 100kg.–An aluminium rack: 70kg.–A steel rack: 65kg.As a safety measure and to avoid damaging the roof, it is essential to use the roof bars and racks approved for your vehicle.Observe the instructions on fitting and use contained in the guide supplied with the roof bars and racks.To fit the transverse roof bars or a roof rack, use the fixing points provided for this purpose:►Remove the fixing covers installed on the vehicle.►Put each fixing in place and lock them on the roof one by one.►Ensure that the roof bars or the roof rack are correctly fitted (by shaking them).The bars are adaptable for each fixing point.BonnetStop & StartBefore doing anything under the bonnet, you must switch off the ignition to avoid any risk of the engine restarting automatically.Take care with objects or clothing that could be caught in the blades of the cooling fan or in certain moving components - risk of strangulation and serious injury!The location of the interior bonnet release lever prevents the bonnet being opened when the left-hand front door is closed.When the engine is hot, handle the exterior safety catch and the bonnet stay with care (risk of burns), using the protected area.When the bonnet is open, take care not to damage the safety catch.Do not open the bonnet under very windy conditions.Cooling of the engine when stoppedThe engine cooling fan may start after the engine has been switched off.Take care with objects or clothing that could be caught in the blades of the fan!Opening►Open the left-hand front door.►Pull the interior release lever, located at the bottom of the door frame, towards you.►Lift the exterior safety catch and raise the bonnet.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131