Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual Practical information Free-wheeling

197Practical information7If swallowed, immediately wash out the mouth with clean water and then drink plenty of water.In certain conditions (high temperature, for example), the risk of release of ammonia cannot be excluded: do not inhale the fluid. Ammonia vapours have an irritant effect on mucous membranes (eyes, nose and throat).Store AdBlue® out of the reach of children, in its original container.ProcedureBefore starting the top-up procedure, ensure that the vehicle is parked on a flat and level surface.In wintry conditions, ensure that the temperature of the vehicle is above -11°C. Otherwise the AdBlue® may be frozen and so cannot be poured into the tank. Park the vehicle in a warmer area for a few hours to allow the top-up to be carried out.Never pour the AdBlue® into the Diesel fuel tank.If any AdBlue® is splashed, or if there are any spillages on the bodywork, rinse immediately with cold water or wipe with a damp cloth.If the fluid has crystallised, clean it off using a sponge and hot water.Important: in the event of a top-up after a breakdown because of a lack of AdBlue, it is essential to wait around 5 minutes before switching on the ignition, without opening the driver’s door, unlocking the vehicle, inserting the key into the ignition switch, or bringing the key for the "Keyless Entry and Start" system into the passenger compartment.Switch on the ignition, then wait for 10 seconds before starting the engine.►Switch off the ignition and remove the key from the switch to switch off the engine.or►With Keyless Entry and Start, press the "START/STOP" button to switch off the engine.►With the vehicle unlocked and the fuel filler flap open, turn the blue cap of the AdBlue® tank anti-clockwise and remove it.►With a container of AdBlue®: after checking the expiry date, read the instructions on the label carefully before pouring the contents of the container into the vehicle's AdBlue tank.►With anAdBlue® pump: insert the nozzle and fill the tank until the nozzle automatically cuts out.In order not to overfill the AdBlue® tank:–Add between 10 and 13 litres using AdBlue® containers.–Stop after the nozzle’s first automatic cut-out, if you are refilling at a service station.The system only registers AdBlue® top-ups of 5litres or more.If the AdBlue® tank is completely empty – which is confirmed by the message “Top upAdBlue: Starting impossible” – it is essential to add at least 5 litres.After refilling►Refit the blue cap to the tank filler and turn it clockwise, as far as it will go.►Close the fuel filler flap.Do not dispose of AdBlue®bottles or containers in the household waste.Place them in a container reserved for this purpose or take them back to where you purchased them.Free-wheelingIn certain situations, it is necessary to put the vehicle into free-wheeling mode (e.g.towing, on a rolling road, automatic car wash (Wash mode), rail or sea transport).The procedure varies according to the type of gearbox and parking brake.
198Practical informationDo not leave the vehicle unattended while coasting.Keyless Entry and StartYou must not depress the brake pedal while switching the ignition on again, then switching it off. If you do, the engine will start, requiring you to restart the procedure.With a manual gearbox and electric parking brake/To release them►With the engine running and while depressing the brake pedal, move the gear selector to the neutral position.►While depressing the brake pedal, switch off the engine.►Release the brake pedal, then switch on the ignition.►While depressing the brake pedal, press the control to release the parking brake.►Release the brake pedal, then switch off the ignition.Reverting to normal operation►While depressing the brake pedal, restart the engine and apply the parking brake.With an automatic gearbox and electric parking brake/To release them►With the engine running and while depressing the brake pedal, set the gear selector to N.►While depressing the brake pedal, switch off the engine.►Release the brake pedal, then switch on the ignition again.►While depressing the brake pedal, press the control lever to release the parking brake.►Release the brake pedal, then switch off the ignition.Reverting to normal operation►While depressing the brake pedal, restart the engine and select modeP.With drive selector and electric parking brake/Release procedure►With the vehicle stationary and the engine running, depress the brake pedal and select modeN.Within 5seconds:►Depress and hold the brake pedal, then observe this order: switch off the engine and move the push selector forwards or backwards.►Release the brake pedal, then switch on the ignition.►Place your foot on the brake and press the electric parking brake control to release it.►Release the brake pedal, then switch off the ignition.A message is displayed on the instrument panel to confirm the unlocking of the wheels for 15minutes.When the vehicle is free-wheeling, the audio system cannot be updated (message displayed on the instrument panel).After 15minutes or reverting to normal operation►While depressing the brake pedal, restart the engine and select modeP.Advice on care and maintenanceGeneral recommendationsObserve the following recommendations to avoid damaging the vehicle.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131