Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual Practical information Engine compartment

191Practical information7Unclip the stay from its housing and place it in the support slot to hold the bonnet open.ClosingHold the bonnet and pull out the stay from the support slot.Clip the stay in its housing.Lower the bonnet and release it near the end of its travel.Pull on the bonnet to check that it is locked correctly.Because of the presence of electrical equipment under the bonnet, it is recommended that exposure to water (rain, washing, etc.) be limited.Engine compartmentThe engine shown here is an example for illustrative purposes only.The locations of the following components may vary:Air filter.Engine oil dipstick.Engine oil filler cap.Petrol engineDiesel engine1.Screenwash fluid reservoir2.Engine coolant reservoir3.Brake fluid reservoir4.Battery/Fuses5.Remote earth point (-)6.Fusebox7.Air filter8.Engine oil filler cap9.Engine oil dipstickDiesel fuel systemThis system is under very high pressure.All work must be carried out only by a PEUGEOT dealer or a qualified workshopElectric motor1.Screenwash fluid reservoir2.Engine coolant reservoir (level only)3.Brake fluid reservoir4.Battery/Fuses5.Remote earth point (-)6.Fusebox7.400V electrical circuit8.Emergency circuit-breaker for emergency services and maintenance techniciansFor more information on the Charging system (Electric), refer to the corresponding section.Checking levelsCheck all of the following levels regularly in accordance with the manufacturer's service schedule. Top them up if required, unless otherwise indicated.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131