Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual Practical information Bonnet

190Practical informationIn the event of loading a 7-seat model (not exceeding 40 cm in height) on the roof, do not exceed the following loads:–Three transverse bars bolted to the roof: 100kg.–An aluminium rack: 70kg.–A steel rack: 65kg.As a safety measure and to avoid damaging the roof, it is essential to use the roof bars and racks approved for your vehicle.Observe the instructions on fitting and use contained in the guide supplied with the roof bars and racks.To fit the transverse roof bars or a roof rack, use the fixing points provided for this purpose:►Remove the fixing covers installed on the vehicle.►Put each fixing in place and lock them on the roof one by one.►Ensure that the roof bars or the roof rack are correctly fitted (by shaking them).The bars are adaptable for each fixing point.BonnetStop & StartBefore doing anything under the bonnet, you must switch off the ignition to avoid any risk of the engine restarting automatically.Take care with objects or clothing that could be caught in the blades of the cooling fan or in certain moving components - risk of strangulation and serious injury!The location of the interior bonnet release lever prevents the bonnet being opened when the left-hand front door is closed.When the engine is hot, handle the exterior safety catch and the bonnet stay with care (risk of burns), using the protected area.When the bonnet is open, take care not to damage the safety catch.Do not open the bonnet under very windy conditions.Cooling of the engine when stoppedThe engine cooling fan may start after the engine has been switched off.Take care with objects or clothing that could be caught in the blades of the fan!Opening►Open the left-hand front door.►Pull the interior release lever, located at the bottom of the door frame, towards you.►Lift the exterior safety catch and raise the bonnet.
191Practical information7►Unclip the stay from its housing and place it in the support slot to hold the bonnet open.Closing►Hold the bonnet and pull out the stay from the support slot.►Clip the stay in its housing.►Lower the bonnet and release it near the end of its travel.►Pull on the bonnet to check that it is locked correctly.Because of the presence of electrical equipment under the bonnet, it is recommended that exposure to water (rain, washing, etc.) be limited.Engine compartmentThe engine shown here is an example for illustrative purposes only.The locations of the following components may vary:–Air filter.–Engine oil dipstick.–Engine oil filler cap.Petrol engineDiesel engine1.Screenwash fluid reservoir2.Engine coolant reservoir3.Brake fluid reservoir4.Battery/Fuses5.Remote earth point (-)6.Fusebox7.Air filter8.Engine oil filler cap9.Engine oil dipstickDiesel fuel systemThis system is under very high pressure.All work must be carried out only by a PEUGEOT dealer or a qualified workshopElectric motor1.Screenwash fluid reservoir2.Engine coolant reservoir (level only)3.Brake fluid reservoir4.Battery/Fuses5.Remote earth point (-)6.Fusebox7.400V electrical circuit8.Emergency circuit-breaker for emergency services and maintenance techniciansFor more information on the Charging system (Electric), refer to the corresponding section.Checking levelsCheck all of the following levels regularly in accordance with the manufacturer's service schedule. Top them up if required, unless otherwise indicated.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131