Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual Lighting and visibility Lighting control stalk

83Lighting and visibility4Lighting control stalkMain lightingAutomatic illumination of lamps/daytime running lampsSidelamps only Dipped or main beam headlamps Operation of the selected lighting is confirmed by the illumination of the corresponding indicator lamp.Headlamp dipping►Pull the lighting control stalk to switch between dipped and main beam headlamps.In "AUTO" and sidelamps mode, pull the lighting control stalk to switch the main beam headlamps on directly ("headlamp flash").Foglamps selection ringRear foglampsThey only work if the sidelamps are on. ►Rotatethe ring forwards/backwards to turn them on/off.When the lighting is switched off automatically ("AUTO" position) the foglamps and the dipped beam headlamps remain on.Front foglamps/Rear foglampsThey operate with the sidelamps, dipped or main beam headlamps on.►Rotate the ring forwards:•once to switch on the front foglamps,•a second time to switch on the rear foglamps.►Turn in the opposite direction to switch off.If the lighting is switched off automatically ("AUTO" position) or the dipped beam headlamps are switched off manually, the foglamps and sidelamps remain on.►Rotate the ring backwards to switch the foglamps off; the sidelamps will then switch off.Switching on the foglamps is prohibited in clear weather or in rain, both day and night. In these situations, the power of their beams may dazzle other drivers. They must only be used in fog or falling snow (rules may vary depending on country).Do not forget to switch off the foglamps when they are no longer necessary.
84Lighting and visibilitySwitching off of the lighting when the ignition is switched off When the ignition is switched off, all of the lamps turn off immediately, except for the dipped beam headlamps if automatic guide-me-home lighting is activated.Switching on the lamps after switching off the ignitionIf the driver's door is opened, a temporary audible signal warns the driver that the lamps are on.They will go off automatically after a period of time that depends on the level of charge in the battery (entering energy economy mode).In some weather conditions (e.g. low temperature or humidity), misting on the internal surface of the glass of the headlamps and rear lamps is normal, and will disappear after the lamps have been on for a few minutes.Never look too closely at the light beam of LED technology lamps - risk of serious eye injury!Travelling abroadIf planning to use your vehicle in a country that drives on the other side of the road, the dipped beam headlamps must be adjusted to avoid dazzling oncoming drivers. Consult a PEUGEOT dealer or a qualified workshop.Direction indicators►Left or right: lower or raise the lighting control stalk, beyond the point of resistance.If you keep the direction indicators on for more than 20 seconds, the volume of the audible signal will increase if the speed is above 50 mph (80 km/h).Three flashes►Press briefly upwards or downwards, without going beyond the point of resistance; the direction indicators will flash 3 times.Parking lamps(Depending on version)Vehicle side marking by lighting the sidelamps on the traffic side only.►Within one minute after switching off the ignition, operate the lighting control stalk upwards or downwards, depending on the side of the traffic (e.g.when parking on the right, push the lighting control stalk down to light up on the left).This is confirmed by an audible signal and the lighting of the corresponding direction indicator lamp on the instrument panel.►To switch off the parking lamps, return the lighting control stalk to the central position.Automatic headlamp illuminationWhen a low level of ambient light is detected by a sunshine sensor, the number plate lamps,sidelamps and dipped beam headlamps are switched on automatically, without any action
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131