Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual Lighting and visibility Guide-me-home and welcome lighting

85Lighting and visibility4on the part of the driver. They can also come on if rain is detected, at the same time as the automatic rain sensitive wipers.As soon as the brightness returns to a sufficient level or after the windscreen wipers are switched off, the lamps are switched off automatically.►Turn the ring to the "AUTO" position. When the function is activated, a message is also displayed.►Turn the ring to another position. An onscreen message is displayed to confirm that the function has been deactivated.MalfunctionIn the event of a malfunction of the rain/sunshine sensor, the vehicle’s lamps come on and this warning lamp is displayed on the instrument panel, accompanied by an audible signal and/or the display of a message.Have it checked by a PEUGEOT dealer or a qualified workshop.Do not cover the rain/sunshine sensor, located on the dashboard or at the top centre of the windscreen behind the interior rear view mirror (depending on equipment); the associated functions would no longer be controlled.In fog or snow, the rain/sunshine sensor may detect sufficient light. For this reason, the lighting will not come on automatically.The inner surface of the windscreen may become misted up and affect the proper operation of the rain/sunshine sensor.In humid and cold weather, demist the windscreen regularly.Daytime running lamps / SidelampsThe front lamps light up automatically when the engine starts.They provide the following functions:–Daytime running lamps (lighting control stalk in the "AUTO" position with adequate light level).–Sidelamps (lighting control stalk in the "AUTO" position with low light levels or "Sidelamps only” or "Dipped/main beam headlamps").The LEDs are brighter when operating as daytime running lamps.Guide-me-home and welcome lightingGuide-me-home lightingAutomaticWith the ring of the lighting control stalk in the "AUTO" position and when the light is poor, the dipped beam headlamps come on automatically when the ignition is switched off.
86Lighting and visibilityYou can activate/deactivate this function and adjust the guide-me-home lighting duration in the Driving/Vehicletouch screen menu.Manual►With the ignition off, pull the lighting control stalk toward you ("headlamp flash") to activate/deactivate the function.Manual guide-me-home lighting goes off automatically after a period of time.Welcome lightingWith the "Automatic headlamp illumination" function activated, in poor light, the sidelamps and dipped beam headlamps come on automatically when the vehicle is unlocked.Activation, deactivation and the duration of the exterior welcome lighting are set in the Driving/Vehicle touch screen menu.Automatic lighting systems - General recommendationsThe automatic lighting systems use a detection camera, located at the top of the windscreen.Operating limitsThe system may be disrupted or not work correctly:–When visibility conditions are poor (e.g.snowfall, heavy rain).–If the windscreen is dirty, misted-up or masked (e.g.sticker) in front of the camera.–If the vehicle is facing highly reflective signs or safety barrier reflectors.The system is not able to detect:–Road users that do not have their own lighting, such as pedestrians.–Vehicles with hidden lighting (e.g.travelling behind a safety barrier on the motorway).–Vehicles at the top or bottom of a steep slope, on winding roads, on crossroads.MaintenanceClean the windscreen regularly, particularly the area in front of the camera.The internal surface of the windscreen can also become misted around the camera. In humid and cold weather, demist the windscreen regularly.Do not allow snow to accumulate on the bonnet or roof of the vehicle as this could obstruct the camera.Automatic headlamp dippingFor more information, refer to the General recommendations for automatic lighting systems.With the ring of the lighting control stalkin the "AUTO" position and the function activated on the touch screen, this system automatically switches between dipped and main beam headlamps, according to lighting and traffic conditions, using a camera located at the top of the windscreen.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131