Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual Lighting and visibility Changing a wiper blade

90Lighting and visibilityChanging a wiper bladeRemoving/Refitting at the front►Carry out these wiper blade replacement operations from the driver's side.►Starting with the wiper blade farthest from you, hold each arm by the rigid section and raise it as far as possible.Take care not to hold the arms at the jet locations.Do not touch the wiper blades - risk of irreparable deformation.Do not release them while moving them. Risk of damaging the windscreen!►Clean the windscreen using screenwash fluid.Do not apply "Rain X" type water-repellent products.►Unclip the worn wiper blade closest to you and remove it.►Install the new wiper blade and clip it to the arm.►Repeat the procedure for the other wiper blade.►Starting with the wiper blade closest to you, once again hold each arm by the rigid section, then guide it carefully onto the windscreen.Removing/refitting at the rear►Hold the arm by the rigid section and raise it as far as possible.►Clean the rear screen using screenwash fluid.►Unclip the worn wiper blade and remove it.►Install the new wiper blade and clip it to the arm.►Once again hold the arm by the rigid section, then guide it carefully onto the rear screen.Automatic windscreen wipersIn AUTO mode, the windscreen wipers operate automatically and adapt to the intensity of the rainfall.Detection is via a rain/brightness sensor, located at the top centre of the windscreen behind the rear view mirror.Do not cover the rain/sunshine sensor.When using an automatic car wash, switch off the automatic wipers and the ignition.In winter, wait until the windscreen is completely clear of ice before activating the automatic wipers.Switching on►Give a short downwards push to the control stalk.A wiping cycle confirms that the instruction has been accepted.This indicator lamp lights up on the instrument panel, accompanied by a message.Depending on version, this indicatorlamp appears on the display or on the instrument panel, accompanied by a message.Switching off►Give the control stalk another brief push downwards or set the control stalk to another position (Int, 1 or 2).This indicator lamp goes off on the instrument panel, accompanied by a message.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131