Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual Lighting and visibility Automatic headlamp illumination

84Lighting and visibilitySwitching off of the lighting when the ignition is switched off When the ignition is switched off, all of the lamps turn off immediately, except for the dipped beam headlamps if automatic guide-me-home lighting is activated.Switching on the lamps after switching off the ignitionIf the driver's door is opened, a temporary audible signal warns the driver that the lamps are on.They will go off automatically after a period of time that depends on the level of charge in the battery (entering energy economy mode).In some weather conditions (e.g. low temperature or humidity), misting on the internal surface of the glass of the headlamps and rear lamps is normal, and will disappear after the lamps have been on for a few minutes.Never look too closely at the light beam of LED technology lamps - risk of serious eye injury!Travelling abroadIf planning to use your vehicle in a country that drives on the other side of the road, the dipped beam headlamps must be adjusted to avoid dazzling oncoming drivers. Consult a PEUGEOT dealer or a qualified workshop.Direction indicators►Left or right: lower or raise the lighting control stalk, beyond the point of resistance.If you keep the direction indicators on for more than 20 seconds, the volume of the audible signal will increase if the speed is above 50 mph (80 km/h).Three flashes►Press briefly upwards or downwards, without going beyond the point of resistance; the direction indicators will flash 3 times.Parking lamps(Depending on version)Vehicle side marking by lighting the sidelamps on the traffic side only.►Within one minute after switching off the ignition, operate the lighting control stalk upwards or downwards, depending on the side of the traffic (e.g.when parking on the right, push the lighting control stalk down to light up on the left).This is confirmed by an audible signal and the lighting of the corresponding direction indicator lamp on the instrument panel.►To switch off the parking lamps, return the lighting control stalk to the central position.Automatic headlamp illuminationWhen a low level of ambient light is detected by a sunshine sensor, the number plate lamps,sidelamps and dipped beam headlamps are switched on automatically, without any action
85Lighting and visibility4on the part of the driver. They can also come on if rain is detected, at the same time as the automatic rain sensitive wipers.As soon as the brightness returns to a sufficient level or after the windscreen wipers are switched off, the lamps are switched off automatically.►Turn the ring to the "AUTO" position. When the function is activated, a message is also displayed.►Turn the ring to another position. An onscreen message is displayed to confirm that the function has been deactivated.MalfunctionIn the event of a malfunction of the rain/sunshine sensor, the vehicle’s lamps come on and this warning lamp is displayed on the instrument panel, accompanied by an audible signal and/or the display of a message.Have it checked by a PEUGEOT dealer or a qualified workshop.Do not cover the rain/sunshine sensor, located on the dashboard or at the top centre of the windscreen behind the interior rear view mirror (depending on equipment); the associated functions would no longer be controlled.In fog or snow, the rain/sunshine sensor may detect sufficient light. For this reason, the lighting will not come on automatically.The inner surface of the windscreen may become misted up and affect the proper operation of the rain/sunshine sensor.In humid and cold weather, demist the windscreen regularly.Daytime running lamps / SidelampsThe front lamps light up automatically when the engine starts.They provide the following functions:–Daytime running lamps (lighting control stalk in the "AUTO" position with adequate light level).–Sidelamps (lighting control stalk in the "AUTO" position with low light levels or "Sidelamps only” or "Dipped/main beam headlamps").The LEDs are brighter when operating as daytime running lamps.Guide-me-home and welcome lightingGuide-me-home lightingAutomaticWith the ring of the lighting control stalk in the "AUTO" position and when the light is poor, the dipped beam headlamps come on automatically when the ignition is switched off.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131