Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual Instruments Trip computer

27Instruments1With digital instrument panelWithBLUETOOTHtouch screen audio system►Press on the Settings menu. ►Select "Display". ►Adjust the brightness by pressing the buttons.You can also switch off the screen:►Select "Turn off screen". The screen goes off completely.►Press the screen again (anywhere on its surface) to activate it.With PEUGEOT Connect Radio►Press this button to select the Settings menu.►Select "Brightness". ►Adjust the brightness by pressing the arrows or moving the slider.The settings are applied immediately.►Press outside the settings window to exit.You can also switch off the screen:►Press this button to select the Settings menu.►Select "Dark". The screen goes off completely.►Press the screen again (anywhere on its surface) to turn it on.With PEUGEOT Connect NavWith the lamps switched on:►Press this button to select the Settings menu.►Select "OPTIONS".►Select "Screen configuration". ►Select the "Brightness” tab.►Adjust the instrument panel and screen brightness by using the arrows or moving the slider.►Press this button to save and exit.You can also switch off the screen:►Press this button to select the Settings menu.►Select "Turn off screen". The screen goes off completely.►Press the screen again (anywhere on its surface) to turn it on.Trip computerDisplays information related to the current trip (range, fuel consumption, average speed, etc.).Information displayDetails are displayed successively.–Trip mileage.–Range.–Current fuel consumption.–Average speed.–Stop & Start time counter.–Information from the speed limit recognition system.►Press the button located on the end of the wiper control stalk.►Or press the thumbwheel on the steering wheel.Trip resetThe reset is performed when the trip counter is displayed.
28Instruments►Press the button on the end of the wiper control stalkfor more than two seconds.►Press the knob on the steering wheel for more than two seconds.►Press this button for more than 2 seconds.DefinitionsRange(miles or km)(Traction battery charge level percentage) (Electric)/Distance that can still be travelled with the fuel remaining in the tank (based on the average fuel consumption over the last few miles (kilometres) travelled) (Petrol or Diesel).Actual traction battery charge level and remaining range (Electric).This value may vary following a change in driving style or terrain, leading to a significant change in current fuel consumption.Vehicle with Petrol or Diesel engine:When the range falls below 19 miles (30km), dashes are displayed.After filling with at least 5 litres of fuel, the range is recalculated and is displayed if it exceeds 62 miles (100km).Dashes appearing permanently in place of numbers while driving indicates a malfunction.Consult a PEUGEOT dealer or a qualified workshop.Vehicle with Electric motor:Two successive alert levels indicate that the energy available has dropped to a low level.For more information on the Indicators, and in particular the Charge level indicator (Electric), refer to the corresponding section.Current consumption(mpg or l/100km or km/l)(miles/kWh or kWh/100km or km/kWh) (Electric)/Calculated during the last few seconds.This function is only displayed at speeds above 19 mph (30km/h) (Petrol).Average consumption(mpg or l/100km or km/l)(miles/kWh or kWh/100km or km/kWh) (Electric)/Calculated since the last trip computer reset.Average speed(mph or km/h)Calculated since the last trip computer reset.Distance travelled(miles or km)Calculated since the last trip computer reset.Stop & Start time counter(minutes/seconds or hours/minutes) If your vehicle is fitted with the Stop & Start function, a time counter calculates the time spent in STOP mode during a journey.The time counter is reset each time the ignition is switched on.Touch screen BLUETOOTH audio systemThis system gives access to the following elements:–Audio system and telephone controls and display ofrelated information.–Vehicle function and equipment setting menus.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131