Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual In the event of a breakdown Running out of fuel (Diesel)

200In the event of a breakdownRunning out of fuel (Diesel)With Diesel engines, the fuel system must be primed if you run out of fuel.Before starting to prime the system, it is essential to put at least 5 litres of Diesel into the fuel tank.For more information on Refuelling and on Misfuel prevention (Diesel), refer to the corresponding section.For non-BlueHDi versions, the fuel system components are located in the engine compartment; this may be under a removable cover.For more information on the Engine compartment, in particular the location of these components under the bonnet, refer to the corresponding section.With 1.6 BlueHDi (Euro 6.1)►Switch on the ignition (without starting the engine).►Wait around 6seconds and switch off the ignition.►Repeat the operation 10times.►Operate the starter motor to start the engine.If the engine does not start at the first attempt, do not keep trying, but restart the procedure.With 1.5 BlueHDi (Euro 6.2/6.3)►Switch on the ignition (without starting the engine).►Wait around 1minute and switch off the ignition.►Operate the starter motor to start the engine.If the engine does not start at the first attempt, do not keep trying, but restart the procedure.Non-BlueHDi engines►Open the bonnet and then, if necessary, unclip the cover to access the priming pump.►Operate the priming pump repeatedly until resistance is felt (resistance may be felt at the first press).►Operate the starter motor to start the engine (if the engine does not start at the first attempt, wait around 15 seconds before trying again).►If the engine does not start after a few attempts, operate the priming pump again, then the starter motor.►Put the cover back in place and clip it in, then close the bonnet.Tool kit►For easier access, move the seat(s) forward.Accessing the toolsVehicle with electric motorWith temporary puncture repair kitThe tools are located in the passenger footwell.With spare wheelThe tools are located under the right-hand front seat.To access the tools:–With non-adjustable front seat, lift the seat cushion by placing your hand between the cushion and the backrest.–With adjustable front seat, move the seat forward as far as possible.The jack is located in the passenger footwell.Vehicle with Petrol or Diesel engineWith temporary puncture repair kitThe kit is located under the right-hand front seat.With spare wheelThe jack is located under the right-hand front seat.The tools are located under the left-hand front seat.List of tools1.Chock to immobilise the vehicle2.Removable towing eye
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131