Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual Ease of use and comfort Temperature conditioning (Electric)

81Ease of use and comfort3workshop which is not equipped with an exhaust gas extraction system.Do not park the vehicle on a flammable surface (dry grass, dead leaves, paper, etc.) - Risk of fire!Glazed surfaces such as the rear screen or windscreen can become very hot in places.Never put objects on these surfaces; never touch these surfaces - Risk of burns!Do not throw remote control batteries away, as they contain metals that are harmful to the environment. Take them to an approved disposal point.Temperature conditioning (Electric)This function allows you to programme the temperature in the passenger compartment to reach a pre-defined, non-modifiable temperature (approx. 21°C) before you enter the vehicle, on the days and at the times of your choice.This function is available when the vehicle is connected or not connected.ProgrammingProgramming can be carried out from a smartphone using the MYPEUGEOT APPapplication.For more information on Remote functions, refer to the corresponding section.With PEUGEOT Connect Nav systemIn the Applicationsmenu: Press "Car Apps" to display the applications home page.Select Temperature conditioning. ►Press + to add a programme.►Select the time of entry into the vehicle and the desired days. Press OK.►Press ON to activate this programme.The temperature pre-conditioning sequence begins approximately 45 minutes before the programmed time when the vehicle is connected (20 minutes when it is not connected) and is maintained for 10 minutes after.You can set multiple programmes.Each one is saved in the system.To optimise the driving range, we recommend starting a programme while the vehicle is connected.The fan noise that occurs during temperature pre-conditioning is perfectly normal.Operating conditions–The function is only activated when the ignition is switched off and the vehicle locked.–When the vehicle is not connected, the function is only activated if the battery charge level is greater than 50%.–When the vehicle is not connected and a recurring programme is active (e.g. from Monday to Friday), if two temperature pre-conditioning sequences are run without the vehicle being used, the programme will be deactivated.Courtesy lampAutomatic switching on/offThe front courtesy lamp comes on when the key is removed from the ignition switch.All courtesy lamps come on when the vehicle is unlocked, when one of the corresponding doors is opened and when locating the vehicle using the remote control. They fade to off after the ignition is switched on and when the vehicle is locked.Take care not to allow objects to come into contact with the courtesy lamp.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131