Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual Ease of use and comfort Rear heating and air conditioning

79Ease of use and comfort3Rear heating and air conditioningIf your vehicle is so equipped, the temperature of the air distributed by the system is the same as the selection for the front.Air flow►Press one of the buttons 2 to increase/decrease the air flow.Additional heating/ventilation systemOnly available for Diesel vehicles.HeatingThis is an additional and separate system which heats the passenger compartment and improves defrosting performance.This indicator lamp is lit while the system is programmed or set in operation remotely via the remote control.It flashes during the whole duration of the heating and goes off at the end of the heating cycle or when stopped using the remote control.VentilationThis system allows ventilation of the passenger compartment with exterior air to improve the temperature experienced on entering the vehicle in summer.ProgrammingWith PEUGEOT Connect RadioPress Connect-App to display the main page.Then press "Programmable heating/ventilation".►Select the "Status" tab to activate/deactivate the system.►Select the "Other settings" tab to choose the "Heating" mode, to heat the engine and passenger compartment, or "Ventilation" to ventilate the passenger compartment.►Then set/save the time at which the preheating temperature will be reached for each selection.Press this button to save. With PEUGEOT Connect Nav►Press the "Applications" menu. ►Press the "Vehicle Apps" tab.►Press "Temperature programming". ►Press the "Status" tab to activate/deactivate the system.►Press the "Parameters" tab to select "Heating" mode to heat the engine and passenger compartment or "Ventilation" mode to ventilate the passenger compartment.►Then set/save the activation time for each selection.►Press "OK" to confirm.You must allow at least 60 minutes between programming operations.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131