Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual Ease of use and comfort Multi-Flex bench seat

68Ease of use and comfortMake sure that the size, shape and volume of the loads carried are compatible with the highway code and safety regulations and do not impair the driver’s field of vision.The load must be evenly distributed in the loading area so as not to interfere with driving the vehicle.Place the load close to the side wall panels, or push it against the side wall panels between the wheel arches.However, it is recommended that heavy objects are placed as close to the cab as possible as a precaution in case of sharp braking.Firmly secure all parts of the load using the stowing rings on the floor of the loading area.For more information on the Interior fittingsand in particular on the stowing rings, refer to the corresponding section.To avoid the risk of injury or accident, the load must be made stable so that it cannot slide, tip over, fall or be projected. To do this, use only retaining straps that conform to current standards (DIN, for example).For more information on putting straps in place, refer to the manufacturer’s user guide.To prevent the load from sliding, there must not be any empty spaces between the load items and the vehicle wall panels.As well as the straps, optimise the stability of the load with stable handling equipment (wedges, rigid blocks of wood or padding).When washing the vehicle, never clean the interior directly with a water jet.For the Multi-Flex bench seat and the Crew cabDo not place sharp or pointed objects in the protective cover to avoid damaging it.Do not place objects on the dashboard.Deactivate the front passenger airbag when carrying long objects.For more information on Deactivating the front passenger airbag, refer to the corresponding section.Avoid placing short or heavy loads in the protective cover; use the loading area whenever possible.Avoid anchoring loads or hanging items on the wall of the partition.For safety reasons, ensure that small objects do not slip through the gaps of about 3cm between the partition and the vehicle's bodywork.Multi-Flex bench seatThis assembly comprises the two-seat front bench seat and a removable flap.For more information on the two-seat front bench seat, refer to the corresponding section.A partition located on the floor behind the front seats protects the driver and front passengers against the risk of load movement.A movable flap in this partition can be removed to allow long items to be loaded.A protective cover is supplied with the vehicle to enable long items to be carried safely.
69Ease of use and comfort3Removing the flap►While holding the flap with one hand, turn the control at the top of the flap with the other hand to release it.►Lower the flap to remove it from its housing.►Stow it behind the driver’s seat, turning the control at the top of the flap to secure it.Refitting the flap►Tilt the flap, with the yellow hinges pointing downwards.►Insert the hinges into their housing then press down fully (to avoid vibrations).►With one hand lift the flap to close it, then with the other hand turn the control at the top of the flap to secure it.Positioning the protective coverWhenever the backrest of the outer seat is folded down and the partition flap is open, the protective cover must be installed.No passengers must be allowed to sit in the central seat if the backrest of the right-hand outer seat is lowered and the partition flap is open.When loading long objects, take care to install the protective cover correctly.Read the following procedure carefully.►Fold down the outer passenger seat backrest.►Install the protective cover by fastening its 4 snap hooks to the 4 anchor points on the partition.►Pull out the head restraint rods from the folded backrest, leaving two notches visible.►Load the desired objects.The maximum load permitted on the folded backrest is 100kg.►Place the strap of the cover around the head restraint.
70Ease of use and comfort►Tighten the strap using the adjustable section in order to correctly retain the items that have been loaded inside the cover.The protective cover may be left in place after use.Regularly check the condition of the protective cover.When signs of wear and tear appear, contact a PEUGEOT dealer to have it replaced by a protective cover that meets the specifications and qualities required by PEUGEOT and your vehicle.Crew cabA movable partition that can be placed behind the first or second row of seats protects the driver and passengers against the risk of load movement.A hatch in the partition can be opened to allow long items to be carried.A protective cover is supplied with the vehicle to enable long items to be carried safely.Lock the movable partition in these 2 positions only.Do not lean on the movable partition when boarding!Stay alert if the vehicle is on a steep slope, with loads behind the partition and passengers on board!Do not place loads behind the partition positioned behind row 2, if the backrest of part 2/3 of the bench seat is folded down.Deactivate the front passenger airbag when carrying long objects.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131