Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual Ease of use and comfort Interior fittings

60Ease of use and comfortNever drive with passengers seated at the rear when the head restraints are removed or not in the high position; the head restraints must be in place and in the high position.For more information on the Seat belts, refer to the corresponding section.Interior fittingsMatsFittingWhen fitting it on the driver's side, only use the mountings present on the carpet.The other mats are simply laid over the carpet.Removing/refitting►To remove it on the driver's side, move the seat as far back as possible and give the fasteners a quarter turn.►To refit it, position the mat and replace the fasteners, giving them a quarter turn.►Check that the mat is secured correctly.To avoid any risk of jamming the pedals:–Only use mats which are suited to the fixings already present in the vehicle; these fixings must be used.–Never fit one mat on top of another.The use of mats not approved by PEUGEOT may interfere with access to the pedals and hinder the operation of the cruise control/speed limiter.The approved mats have two fasteners located underneath the seat.Overhead storage unitThis compartment, located above the sun visors, can be used to store various objects.Roof and roof storageOverhead storage compartment and central storage compartment The overhead storage compartment (1) is located above the sun visors and can be used to store miscellaneous objects.There is a storage space(2) located in the roof lining.The maximum permitted load is 6kg.
61Ease of use and comfort3In the event of sharp deceleration, objects placed in the central storage compartment of the roof may be transformed into projectiles.Rear storage compartmentThis compartment is accessible from the rear seats and from the vehicle's boot.It has a capacity of 60 litres and themaximum permitted load is10kg.►To open it from the rear seats, slide the rear storage compartment shutters.►To open it from the vehicle’s boot, place your thumb on the boot recess then pull the handle.Open the rear storage compartment with care, to prevent any objects stored inside from falling out.Light ambienceThe light ambience settings are changed via theDriving/Vehicletouch screen menu.BlindOpening/Closing►Press and hold the button; the blind opens/closes, stopping when the button is released.If the blind becomes trapped while moving, reverse its movement. To do this, press the relevant control.When pressing the button to open/close the blind, the driver must ensure that nothing and no one might interfere with its movement.The driver must ensure that passengers use the blind correctly.Pay particular attention to children when operating the blind.12V accessory socket(s)►Plug in a 12V accessory (with a maximum rated power of 120W) using a suitable adapter.Observe the maximum power rating to avoid damaging the accessory.The connection of an electrical device not approved by PEUGEOT, such as a USB charger, may adversely affect the operation of vehicle electrical systems, causing faults such as poor radio reception or interference with displays in the screens.
62Ease of use and comfortUSB socket(s)Socket 1 enables audio files sent to your audio system to be played through the vehicle's speakers.When the USB socket is used, the portable device charges automatically.While charging, a message is displayed if the power drawn by the portable device exceeds the current supplied by the vehicle.For more information about how to use this equipment, refer to the sections describing the audio and telematics systems.*Only on the Peugeot Partner.Socket1 allows a smartphone to be connected by Android Auto® or CarPlay®, enabling certain smartphone applications to be used on the touch screen.Sockets 1 and 2* allow a portable device to be connected in order to charge it.For best results, use a cable made or approved by the device manufacturer.These applications can be managed using the steering-mounted controls or the audio system controls.220V/50Hz socketAC 220V50Hz120WIt is locatedon the side of the central storage compartment.This socket (max. power: 150W) operates with the engine running, and with the Stop & Start system in STOP mode.►Lift the protective cover.►Check that the green indicator lamp is on.►Connect your multimedia or other electrical device (telephone charger, laptop computer, CD-DVD player, bottle warmer, etc.).In the event of a malfunction, the greenindicatorlamp flashes.Have the socket checked by a PEUGEOT dealer or a qualified workshop.Connect only one device at a time to the socket (do not use extension leads or multi-socket adapters).Connect only devices with class II insulation (shown on the device).Do not use metal-cased devices (e.g. electric shaver, etc.).As a safety measure, if power consumption is high and power is required by the vehicle's electrical system (due to severe weather conditions, electrical overload, etc.), power to the socket may be cut off, in which case the green indicator lamp goes off.Wireless smartphone charger
63Ease of use and comfort3This system allows wireless charging of a portable device such as a smartphone, using the magnetic induction principle, in accordance with the Qi 1.1 standard.The portable device to be charged must be compatible with the Qi standard, either by design or by using a compatible holder or shell.A mat can also be used provided that it is approved by the Manufacturer.The charging area is identified by the Qi symbol.The charger works with the engine running and with the Stop & Start system in STOP mode.Charging is managed by the smartphone.With the Keyless Entry and Start system, the charger’s operation may be briefly disrupted when a door is opened or the ignition is switched off.Charging►With the charging area clear, place a device in its centre.When the portable device is detected, the charger’s indicator lamp lights up green. It remains lit for the whole time that the battery is being charged.The system is not designed to charge multiple devices simultaneously.Do not leave metal objects (e.g.coins, keys, vehicle remote control) in the charging area while a device is being charged - Risk of overheating or interrupting the charging!When using applications for a long time in combination with wireless charging, some smartphones may switch to thermal safety and cause some functions to stop.Checking operationThe state of the indicator lamp allows the operation of the charger to be monitored.State of the indicator lampMeaningOffEngine switched off.No compatible devices detected.Charging complete.Fixed greenCompatible portable device detected.Charging.State of the indicator lampMeaningFlashing orangeForeign object detected in the charging zone.Portable device not well centred in the charging zone.Fixed orangeMalfunction of the portable device's battery meter.Device battery temperature too high.Charger malfunction.If the indicator lamp is fixed orange:–remove the device, then place it back in the centre of the charging zone.or–remove the device and try again in a quarter of an hour.If the problem persists, have the system checked by a PEUGEOT dealer or a qualified workshop.Floor boxes (Petrol or Diesel)
64Ease of use and comfortThere are two boxes located under the rear passenger footwells.►To open them, slide your fingers into the notch and lift the cover.Aircraft style tables►To put the table back in place, pull it upwards.As a safety precaution, the aircraft style table unhooks itself if excessive pressure is applied.►To store the table, pull it downwards.Do not place hard or heavy objects on the table. Such objects could become projectiles in the event of sudden deceleration.Side blindsThey are fitted to the windows of the sliding side doors (depending on version).►To raise or lower the blind, pull it by the tab.To avoid damaging the blind:–Guide it slowly, using the tab, while raising or lowering it.–Make sure the tab is securely fastened before opening the door.High load retaining netThis net, hooked onto the upper mountings and the lower rings or lugs, enables the use of the full loading volume, up to the roof:–Behind the front seats (row 1) when the rear seats are folded.–Behind the rear seats (row 2).When positioning the net, check that the strap loops are visible from the boot; this will make slackening or tightening them easier.Remove the luggage cover shelf or roller (depending on version).
65Ease of use and comfort3Installation behind row 1►Open the covers on the upper mountings 1.►Unroll the high load retaining net.►Position one end of the net's metal bar in the corresponding upper mounting 1, then do the same with the other end.►Fully extend the straps.►Wind each strap around bar 3 located under the front seat cushion (row 1), then secure each spring hook to the ring on the corresponding strap.►Fold down the rear seats.►Tighten the straps without raising the bench seat.►Check that the net is hooked and tightened correctly.Installation behind row 2►Fold or remove the luggage cover.►Open the covers on the upper mountings 2.►Unroll the high load retaining net.►Position one end of the net's metal bar in the corresponding upper mounting 2, then do the same with the other end.►Attach the hook on each of the net's straps to the corresponding stowing ring 4 (located on the floor).►Tighten the straps.►Check that the net is hooked and tightened correctly.Never use the ISOFIX ring, which is for fixing the strap of a child seat with Top Tether.Two-position luggage cover shelf (removable)StandardStandardIt can be installed in two different positions: high and low.It consists of two sections which can be folded back on each other.►To fold it from the boot, grasp it and fold it back on itself up to the rear seats. From the
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131