Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual Ease of use and comfort Front seats

50Ease of use and comfortGeneral recommendations for the seatsFor safety reasons, seat adjustments must only be made when the vehicle is stationary.Folding or unfolding the seat backrests must only be done with the vehicle stationary.Before moving the seat backwards, ensure that there is no person or object that might prevent the full travel of the seat.There is a risk of trapping or pinching passengers if present in the rear seats or of jamming the seat if large objects are placed on the floor behind the seat.Do not place hard or heavy objects on the backrests forming a table. They could become dangerous projectiles in the event of sudden braking or a collision.–Do not remove a head restraint without stowing it; secure it to a support inside the vehicle.–Check that the seat belts remain accessible to the passenger and easy to fasten.–Passengers must never take their seat without adjusting and fastening their seat belt.–In row 3, be careful not to leave your feet under the row 2 seat while it is being tilted.–When a row 3 seat is in the fully folded position, ensure that the strap is correctly hooked to the Top Tether fixing of the row 2 backrest: risk of unexpected tipping of the seat.Before carrying out the manoeuvres, check that nothing and no one is obstructing the moving elements and their locking.To avoid sudden folding, take care to hold the backrest and support it until it is horizontal.Never put your hand underneath the seat cushion to guide the seat downwards or upwards, you could get your fingers trapped. Place your hand on the grip/strap (depending on equipment) at the top of the seat cushion.Please note: an incorrectly latched backrest compromises the safety of passengers in the event of sudden braking or an impact.The contents of the boot may be thrown forward - risk of severe injury!Front seatsPEUGEOTi-CockpitBefore taking to the road and to make the most of the ergonomic layout of the PEUGEOT i-Cockpit, carry out these adjustments in the following order:–head restraint height.–seat backrest angle.–seat cushion height.–longitudinal seat position.–steering wheel reach and then height.–rear view mirror and door mirrors.Once these adjustments have been made, check that the "head-up" instrument panel can be viewed correctly over the smaller diameter steering wheel.
51Ease of use and comfort3AdjustmentsLongitudinal►Raise the control and slide the seat forwards or backwards.Height(driver only)►If fitted to the vehicle, pull the control upwards to raise or push it downwards to lower, as many times as necessary to obtain the position required.For more information on the Seat belts, refer to the corresponding section.Tilting the backrest►Push the control backwards then use your weight and your legs to adjust the backrest.Lumbar(driver only)►Turn the knob to obtain the desired level of lumbar support.Armrest►To put the armrest in the vertical position, raise it until it locks into place.►Lower the armrest to return it to the position for use.The armrest can be removed from the passenger seat.Removing the armrest►Raise the armrest into the vertical position.►Push the armrest shaft towards the backrest.►While holding it in this position, rotate the armrest towards the rear.►Pull the armrest to detach it from the backrest.Refitting the armrest
52Ease of use and comfort►Slot the armrest into the backrest, ensuring that you align the bayonet lugs with the holes.►Push the armrest shaft towards the backrest.►While holding it in this position, rotate the armrest towards the front. The armrest is once again secured onto the backrest.Storage compartment under the seat►Lift the passenger’s seat cushion to access the storage compartment.Retractable position►If the centre console inconveniences you, remove the passenger's seat armrest.►Push the control rearwards fully to tilt and guide the assembly.This position allows you to transport long loads inside the vehicle with the doors closed.When retracted, the maximum permitted weight on the backrest is 50kg.►To reposition the seat cushion, raise the backrest until it locks in the raised position.Heated seat control►Approximately 30 seconds after starting the engine, press the control.It can be activated when the outside temperature is below 20°C.The temperature is controlled automatically.Pressing again interrupts operation.If you press the control while the engine is not running, the request will be memorised for approximately 2 minutes. With the two-seat front bench seat, the driver's seat control switches the heating on or off for the bench seat’s outer seat.Do not use the function when the seat is not occupied.Reduce the heating intensity as soon as possible.When the seat and passenger compartment have reached a satisfactory temperature,
53Ease of use and comfort3switch the function off; reducing electrical consumption in turn decreases energy consumption.Prolonged use of heated seats is not recommended for people with sensitive skin.There is a risk of burns for people whose perception of heat is impaired (e.g.illness, taking medication).To keep the heated pad intact and to prevent a short circuit:–Do not place heavy or sharp objects on the seat.–Do not kneel or stand on the seat.–Do not spill liquids onto the seat.–Never use the heating function if the seat is damp.Steering wheel adjustment►When stationary, pull the control lever to release the steering wheel.►Adjust the height and reach.►Lower the control lever to lock the steering wheel.As a safety precaution, these operations must only be carried out while the vehicle is stationary.MirrorsDoor mirrorsAdjustment►Move control A or turn control C (depending on the version you have) to the right or to the left to select the corresponding mirror.►Move control B or C (depending on the version you have) in any of the four directions to adjust.►Return control A or C (depending on the version you have) to its centre position.As a safety measure, the mirrors should be adjusted to reduce the blind spots.The objects observed are, in reality, closer than they appear.Take this into account when assessing the distance of vehicles approaching from behind.Manual foldingYou can manually fold the mirrors (parking obstruction, narrow garage, etc.)►Turn the mirror towards the vehicle. Electric foldingDepending on equipment, the door mirrors can be folded electrically.►From the inside, with the ignition on, place control A in the central position.►Pull control A backwards.►Lock the vehicle from the outside.If the mirrors are folded using control A, they will not unfold when the vehicle is unlocked.Electric unfolding The door mirrors are unfolded electrically when the vehicle is unlocked using the remote control
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131