Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual Ease of use and comfort Dual-zone automatic air conditioning

75Ease of use and comfort3For maximum cooling or heating of the passenger compartment, it is possible to exceed the minimum value 14 or the maximum value 28.►Turn control 1 to the left until "LO"is displayed or to the right until "HI" is displayed.Air distributionWindscreen and side windows (3a). Central and side air vents (3b). Footwells (3c). The air distribution can be adapted by combining the corresponding buttons.For optimum comfort, depending on the outside temperature<15°C: press buttons 3a and 3c.15°C- 25°C: press buttons 3b and 3c.>25°C: press button 3b.Air conditioningWith the engine running, the air conditioning is designed to operate effectively in all seasons, with the windows closed.It enables you to:–lower the temperature in summer,–enhance the effectiveness of the demisting function in winter, above 3°C.On/Off►Press button 5 to activate/deactivate the air conditioning system.When the air conditioning is in operation, to cool the air more quickly, you can use interior air recirculation for a few moments by pressing button 4. Then restore the intake of exterior air.The air conditioning does not operate when the air flow adjustment is set to off.Switching the system off could result in discomfort (humidity, misting).Dual-zone automatic air conditioning1.Temperature.2.Air flow.3.Air distribution.4.Recirculation of interior air.5.Air conditioning on/off.6.Automatic comfort mode.7.Visibility programme.8."Mono" function.Automatic comfort mode►Press the "AUTO" button 6 to toggle the mode.The active mode appears in the display screen, as described below:Ensures soft, quiet operation by limiting air flow.Offers the best compromise between a comfortable temperature and quiet operation.Provides dynamic, effective air flow.When the engine is cold, the air flow will only increase to its optimum level gradually, to avoid distributing too much cold air.In cold weather, it prioritises the distribution of warm air to the windscreen, the side windows and the footwells only.Manual modeIf you wish, you can make a different choice from that suggested by the system, by changing a setting. The other functions will still be controlled automatically. The "AUTO" symbol disappears if you change a setting.Deactivating the system►Press button 2 "-" until the fan symbol disappears.
76Ease of use and comfortThis disables all functions of the dual-zone automatic air conditioning system.The temperature is no longer regulated. A slight flow of air can still be felt, due to the forward movement of the vehicle.►Press button 2 "+" to switch the system on again.TemperatureThe driver and front passenger can each set the temperature to suit their preferences.The value shown on the display is a level of comfort, not a temperature in Celsius or Fahrenheit.►Push button 1 down to decrease the value or up to increase it. A setting of around 21 provides optimum comfort. Depending on your requirements, a setting between 18 and 24 is normal.In addition, we recommend avoiding left/right setting differences of more than 3.On entering the vehicle, if the interior temperature is significantly colder or warmer than the comfort value setting, there is no need to alter the value displayed in order to reach the required level of comfort. The system compensates automatically and corrects the temperature difference as quickly as possible.For maximum cooling or heating of the passenger compartment, it is possible to exceed the minimum value 14 or the maximum value 28.►Push button 1 down until "LO" is displayed or up until "HI" is displayed."Mono" functionThe comfort setting for the passenger side can be indexed to the driver's comfort setting (mono-zone).►Press the corresponding button 8 to activate/deactivate the function.The indicator lamp in the button comes on when the function is activated.The function is deactivated automatically if a passenger uses the temperature control.Visibility programme►Press the "visibility" button 7 to demist or de-ice the windscreen and side windows as quickly as possible. The system automatically manages the air conditioning, air flow and air intake, and provides optimum distribution towards the windscreen and side windows.►Press the "visibility" button 7 again to stop the programme.Or►Press the "AUTO" button 6 to return to the Automatic Comfort programme.Air conditioningWith the engine running, the air conditioning is designed to operate effectively in all seasons, with the windows closed.It enables you to:–lower the temperature in summer,–enhance the effectiveness of the demisting function in winter, above 3°C.On/Off►Press button 5 to activate/deactivate the air conditioning system.When the air conditioning is in operation, to cool the air more quickly, you can use interior air recirculation for a few moments by pressing button 4. Then restore the intake of exterior air.The air conditioning does not operate when the air flow adjustment is set to off.Switching the system off could result in discomfort (humidity, misting).Air distribution►Pressing button 3 successively directs the air flow towards:–windscreen, side windows and footwells, –footwells,–central vents, side vents and footwells,–windscreen, side windows, central vents, side vents and footwells,–central and side vents,
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131