Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual Driving Starting/Switching off the electric motor

121Driving6must turn the steering wheel while pressing the "START/STOP" button to assist unlocking of the steering column. A message is displayed.Switching off►Immobilise the vehicle, with the engine at idle.►With a manual gearbox, ideally put the gear lever into neutral.►With an automatic gearbox, ideally select positionP.With the conventional key/With the remote control key►Turn the key all the way to position 1 (Stop)and remove it from the ignition.►To lock the steering column, turn the steering wheel until it locks.To facilitate unlocking of the steering column, it is recommended that the wheels be returned to the straight ahead position before switching off the engine.►Check that the parking brake is correctly applied, particularly on sloping ground.Never switch off the ignition before the complete immobilisation of the vehicle. With the engine off, the braking and steering assistance systems are also turned off: risk of loss of control of the vehicle.As a safety measure, never leave the vehicle without taking the remote control with you, even for a short time.Avoid attaching heavy objects to the key or the remote control, which would weigh down on its blade in the ignition switch and could cause a malfunction.Key left in the ignitionWhen opening the driver's door, an alert message is displayed, accompanied by an audible signal, to remind you that the key is still in the ignition switch at position 1 (Stop).If the key has been left in the ignition switch at position 2 (Ignition on), the ignition will be switched off automatically after one hour.To switch the ignition back on, turn the key to position 1 (Stop), then back to position 2 (Ignition on).WithKeyless Entry and Start►With the remote control in the recognition zone, press the "START/STOP" button.With a manual gearbox, the engine stops and the steering column locks.With the EAT8 automatic gearbox, the engine stops.If the vehicle is not immobilised, the engine will not stop.To avoid any risk of jamming the pedals:–only use mats which are suited to the fixings already present in the vehicle; these fixings must be used,–never place one mat on top of another.The use of mats not approved by PEUGEOT may interfere with access to the pedals and hinder the operation of the cruise control / speed limiter.The mats approved by PEUGEOT have two fixings located below the seat.Starting/Switching off the electric motorStartingThe drive selector must be in mode P.►If using a conventional or remote control key, depress the brake pedal and turn the key to position 3 until the motor starts, without depressing the accelerator. As soon as the motor starts, release the key so it returns to position 2. ►If usingKeyless Entry and Start, depress the brake pedal and briefly press the "START/STOP" button.►Keep your foot on the brake pedal until the READY indicator lamp comes on and an audible signal is emitted, indicating that the vehicle is ready to drive.
122Driving►With your foot on the brake, select modeDor R.►Release the brake pedal, then accelerate.On starting, the instrument panel lights up and the power indicator cursor moves to the "neutral" position. The steering column automatically unlocks (you may hear a sound and feel the steering wheel move).Switching off►If using a conventional or remote control key,turn the key fully to position 1 (Stop).►If using Keyless Entry and Start, press the "START/STOP" button.Before exiting the vehicle, check that:–The drive selector is in mode P.–The READY indicator lamp is off.The drive selector moves automatically to mode P when the motor is switched off or when the driver's door is opened.If the driver's door is opened while the required conditions for switching off are not met, an audible signal is emitted, accompanied by the display of a warning message.Special case with Keyless Entry and StartSwitching on the ignitionwith Keyless Entry and StartWith the "Keyless Entry and Start" electronic key inside the vehicle, pressing the "START/STOP" button, without depressing any of the pedals, allows the ignition to be switched on.►Press this button again to switch off the ignition and allow the vehicle to be locked.Back-up startingA back-up reader is fitted to the steering column, to enable the engine to be started if the system fails to detect the key in the recognition zone, or if the battery in the electronic key is flat.►Place and hold the remote control against the back-up reader.►With a manual gearbox, place the gear lever in neutral, then fully depress the clutch pedal.►With an automatic gearbox or a drive selector, select modeP, then depress the brake pedal.►Press the "START/STOP" button.The engine starts.Remote control not recognised withKeyless Entry and StartIf the remote control is no longer in the recognition zone, a message appears on the instrument panel when closing a door or trying to switch off the engine.►Press the "START/STOP" button for about 3 seconds to confirm switching off the engine, then contact a PEUGEOT dealer or a qualified workshop.Forced switch-off with Keyless Entry and StartIn case of emergency only, the engine can be switched off without conditions (even when driving).
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131