Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual Driving Speed limiter

142Driving►Switch on the speed limiter/cruise control.The speed limiter/cruise control information is displayed. Upon detecting a sign suggesting a new speed setting, the system displays the value and "MEM" flashes for a few seconds, prompting you to save it as a new speed setting.If there is a difference of less than 6 mph (9km/h) between the speed setting and the speed displayed by the Road signs recognition, the "MEM" symbol is not displayed.Depending on the road conditions, several speeds may be displayed.►Press button2 once to save the suggested speed value.A message is displayed, confirming the request.►Press button2 again to confirm and save the new speed setting.The display then reverts to its previous state.Extended Traffic Sign RecognitionFor more information, refer to the General recommendations on the use of driving and manoeuvring aids.This additional system recognises these road signs and displays them on the instrument panel if the appropriate display mode is selected:–No entry: when entering a lane in the wrong direction, an alert message, including the symbol of this sign, is displayed on the instrument panel (request to check the direction of traffic).–Other signs: as you approach it, the symbol of the corresponding sign is displayed on the instrument panel.The actual road signs always take priority over those displayed by the system.The signs must comply with the Vienna Convention on road signs.Activation/DeactivationThe settings are changed via theDriving/Vehicletouch screen menu.Speed limiterFor more information, refer to the General recommendations on the use of driving and manoeuvring aids.This system prevents the vehicle from exceeding the speed programmed by the driver (speed setting).The speed limiter is switched on manually.The minimum speed setting is 19 mph (30km/h).The speed setting remains in the system memory when the ignition is switched off.Steering-mounted control1.ON (LIMIT position)/OFF (position 0)2.Reduce the speed setting3.Increase the speed setting4.Pause/resume speed limiter with the speed setting previously stored5.Depending on version:Display the speed thresholds saved using the Memorising speeds functionorUse the speed suggested by the Road signs recognition (MEM display)6.Display and adjustment of the programmed inter-vehicle distance
143Driving6For more information on Memorising speedsor the Road signs recognition, refer to the corresponding sections.Information displayed on the instrument panel7.Speed limiter mode selection indication8.Speed limiter on/pause status indication9.Programmed speed setting value10.Speed limiter recommendation with Road signs recognition (depending on version)Switching on/Pausing►Turn thumbwheel 1 to the "LIMIT" position to select speed limiter mode; the function is paused.►If the speed limit setting is suitable (most recent speed setting programmed in the system), press button 4-II to switch the speed limiter on.►Pressing 4-II again temporarily pauses the function (pause).When the speed setting remains below the vehicle's speed for a prolonged period of time, an audible warning is emitted.Adjusting the limit speed settingYou do not have to switch the speed limiter on in order to set the speed.To modify the limit speed setting based on the vehicle’s current speed:►Briefly press button2 or 3 to change the value in steps of +or -1mph (1.6 km/h).►Press and hold button2 or 3 to change the value in steps of +or -5mph (8 km/h).To change the limit speed setting using memorised speeds, via the touch screen:►Press button5 to display the memorised speed settings.►Press the touch screen button for the desired speed setting.The selection screen closes after a few moments.This setting becomes the new limit speed.To modify the cruise speed setting based on the speed suggested by the Road signs recognition, as shown on the instrument panel:►Press button5 once; a message is displayed to confirm the memorisation request.►Press button5 again to save the suggested speed.The speed is immediately shown on the instrument panel as the new speed setting.Temporarily exceeding the speed setting►Fully depress the accelerator pedal.The speed limiter is temporarily deactivated and the displayed speed setting flashes.►Release the accelerator pedal to return to below the speed setting.When exceeding the speed is not due to the driver's action (e.g.in case of a steep slope), an audible signal is triggered immediately.On a steep descent or in the event of sharp acceleration, the speed limiter will not be able to prevent the vehicle from exceeding the speed setting.If necessary, apply the brakes to control your vehicle’s speed.When the vehicle speed returns to the speed setting level, the speed limiter operates again: the speed setting display becomes fixed again.Switching off►Turn the thumbwheel 1 to the "0" position: the display of information on the speed limiter disappears.
144DrivingMalfunctionIn the event of a malfunction, dashes are displayed flashing and then fixed instead of the speed setting.Have it checked by a PEUGEOT dealer or a qualified workshop.Fixed speed limiterIf fitted to your vehicle, its speed can be limited to a fixed setting.A label located in the passenger compartment indicates this maximum speed.The fixed speed limiter is not a cruise control type function. It cannot be activated or deactivated by the driver during the trip.The maximum speed is originally set according to the regulations in force in the country of sale.This maximum speed cannot be changed by the driver.If you wish to modify this maximum speed, contact a PEUGEOT dealer.Cruise control - Specific recommendationsThe cruise control function does not guarantee compliance with the maximum authorised speed and the safety distance between vehicles, the driver remains responsible for their driving.In the interest of public safety, only use cruise control if the traffic conditions enable vehicles to drive at a steady speed and maintain an adequate safety distance.Remain vigilant while cruise control is activated. If you press and hold one of the speed setting modification buttons, your vehicle may change speed very abruptly.When descending a steep hill, the cruise control system cannot prevent the vehicle from exceeding the set speed. Brake if necessary to control the vehicle speed.On steep climbs or when towing, the set speed may not be reached or maintained.Exceeding the programmed speed settingYou can temporarily exceed the speed setting by pressing the accelerator pedal (the programmed speed flashes).To return to the speed setting, release the accelerator pedal (when the set speed is reached again, the displayed speed stops flashing).Operating limitsNever use the system in the following situations:–In an urban area with the risk of pedestrians crossing the road.–In heavy traffic (except versions with the Stop & Go function).–On winding or steep roads.–On slippery or flooded roads.–In poor weather conditions.–In the event of restricted visibility for the driver.–Driving on a speed circuit.–Driving on a rolling road.–When using a ‘space-saver’ type spare wheel.–When using snow chains, non-slip covers or studded tyres.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131