Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual Driving Park Assist

167Driving6Obstacles may appear further away than they actually are.It is important to monitor the sides of the vehicle during the manoeuvre, using the mirrors.Parking sensors also provide additional information about the area around the vehicle.180° viewThe 180° view facilitates reversing out of a parking space, making it possible to see the approach of vehicles, pedestrians and cyclists.This view is not recommended for carrying out a complete manoeuvre.It features 3 areas: left A, centre B and right C.This view is only available via the view selection menu.Park AssistFor more information, refer to the General recommendations on the use of driving and manoeuvring aids.This system provides active parking assistance: it detects a parking space and then steers in the appropriate direction to park in the space while the driver controls the driving direction, gear changes, acceleration and braking.To help the driver monitor the manoeuvre, the system automatically triggers the display from theVisiopark 1function and activates the parking sensors.The system measures the available parking spaces and calculates the distances to obstacles using ultrasonic sensors built into the front and rear bumpers of the vehicle.The system assists with the following manoeuvres:A.Entering a "parallel" parking spaceB.Leaving a "parallel" parking spaceC.Entering a "bay" parking spaceOperation►When approaching a parking area, reduce the speed of your vehicle to 19mph (30km/h) or less.Activating the functionThe function is activated in the Vehicle/Driving touch screen menu.Select "Park Assist".Activating the function deactivates the Blind spot monitoring system.You can deactivate the function at any time until the parking space entry or exit manoeuvre begins, by pressing the arrow located in the top left-hand corner of the display page.
168DrivingSelecting the type of manoeuvreA manoeuvre selection page is displayed on the touch screen: by default, the "Entry" page if the vehicle has been running since the ignition was switched on, otherwise, the "Exit" page.►Select the type and side of the manoeuvre to activate the parking space search.The selected manoeuvre can be changed at any time, even while searching for an available space.This indicator lamp comes on to confirm the selection.Parking space search►You should drive at a distance of between 0.50m and 1.50m from the row of parked vehicles, without ever exceeding 19mph (30km/h), until the system finds an available space.The parking space search is suspended at higher speeds. The function is automatically deactivated if the vehicle speed exceeds 31 mph (50km/h).For ''parallel'' parking, the space must at a minimum be equal to the length of your vehicle plus 0.60 m.For ''bay'' parking, the width of the space must be equal to the width of your vehicle plus 0.70 m.If the parking sensors function has been deactivated in the Driving/Vehicle touch screen menu, it will be automatically reactivated when the system is activated.When the system finds an available space, "OK" is displayed on the parking view, accompanied by an audible signal.Preparing for the manoeuvre►Move very slowly until the request to stop the vehicle is displayed: "Stop the vehicle", accompanied by the "STOP" sign and an audible signal.Once the vehicle has stopped, an instructions page is displayed on the screen.►To prepare for the manoeuvre, follow the instructions. The start of the manoeuvre is indicated by the message"Manoeuvre under way", accompanied by an audible signal.Reversing is indicated by this message: "Release the steering wheel, reverse".The Visiopark 1 function and the parking sensors are automatically activated to help you monitor your vehicle's close surroundings during the manoeuvre.During the manoeuvreThe system controls the vehicle’s steering. It gives instructions on the manoeuvring direction when starting "parallel" entry and exit parking manoeuvres, and for all "bay" entry manoeuvres.These instructions are displayed as a symbol accompanied by a message:"Reverse". “Go forwards". The manoeuvring status is indicated by these symbols:Manoeuvre in progress (green).
169Driving6Manoeuvre cancelled or finished (red) (the arrows indicate that the driver must resume control of the vehicle).The maximum speeds during manoeuvres are indicated by these symbols:75 mph or 7km/h, for parking space entry. 53 mph or 5km/h, for parking space exit. During manoeuvring phases, the steering wheel performs rapid turns: do not hold the steering wheel or put your hands between the spokes of the steering wheel. Watch out for any objects that could interfere with the manoeuvre (loose clothing, scarf, tie, etc.). Risk of injury!It is the driver's responsibility to constantly monitor the traffic, especially vehicles coming towards you.The driver should check that no objects or people are obstructing the vehicle’s path.The images from the camera(s) displayed on the touch screen may be distorted by the terrain.In shady areas, or in inadequate sunlight or lighting conditions, the image may be darkened and with lower contrast.The manoeuvre can be permanently interrupted at any time, either by the driver or automatically by the system.Interruption by the driver:–taking over control of the steering.–activating the direction indicator lamps on the opposite side to that of the manoeuvre.–unfastening the driver's seat belt.–switching off the ignition.Interruption by the system:–vehicle exceeding the speed limit of 5mph (7km/h) during parking space entry manoeuvres, or 3mph (5km/h) during parking space exit manoeuvres.–activation of anti-slip regulation on a slippery road.–opening of a door or the boot.–engine stall.–system malfunction.–after 10 manoeuvres to enter or exit a parallel parking space and after 7 manoeuvres to enter a parking bay.Interrupting the manoeuvre automatically deactivates the function.The manoeuvre symbol is displayed in red, accompanied by the "Manoeuvre cancelled" message on the touch screen.A message prompts the driver to take back control of the vehicle.The function is deactivated after a few seconds; this indicator lamp goes off and the function returns to the initial display.End of the parking space entry or exit manoeuvreThe vehicle stops as soon as the manoeuvre is completed.The manoeuvre symbol is displayed in red, accompanied by the message "Manoeuvre completed" on the touch screen.When the function is deactivated, this indicator lamp goes off, accompanied by an audible signal.When entering a parking space, the driver may be required to complete the manoeuvre.Operating limits–The system may suggest an inappropriate parking space (parking prohibited, work in progress with damaged road surface, location alongside a ditch, etc.).–The system may indicate that a space has been found but will not offer it because of a fixed obstacle on the opposite side of the manoeuvre, which would not allow the vehicle to follow a trajectory required for parking.–The system may indicate that a space has been found but the manoeuvre will not be triggered, because the width of the lane is insufficient.–The system is not designed for performing the parking manoeuvre on a sharp bend.–The system does not detect spaces that are much larger than the vehicle itself or that are delimited by obstacles that are too low
170Driving(pavements, studs, etc.) or too thin (trees, posts, wire fences, etc.).–If the boot is heavily loaded, the tilt of the vehicle towards the rear may interfere with the distance measurements.Do not use the function under the following exterior conditions:–Alongside a soft shoulder (e.g. ditch) or quay or on the edge of a drop.–When the road surface is slippery (e.g. ice).If any of the following malfunctions occurs, do not use the system:–If a tyre is under-inflated.–If one of the bumpers is damaged.–If one of the cameras is faulty.If the vehicle has undergone any of the following modifications, do not use the function:–When carrying an object extending beyond the dimensions of the vehicle (ladder on the roof bars, bicycle carrier on the tailgate, etc.).–With a non-approved towball in place.–With snow chains fitted.–When driving on a small-diameter or "space-saver" type spare wheel.–When the wheels fitted are a different size from the original ones.–After modifying one or both bumpers (added protection).–If the sensors have been repainted other than by the PEUGEOT dealer network.–With sensors not approved for the vehicle.MalfunctionsWhen the function is not activated, this indicator lamp will flash briefly and an audible signal will be emitted to indicate a system malfunction.If the malfunction occurs while the system is in use, theindicatorlamp goes off.If the parking sensor malfunction occurs during use, indicated by this warning lamp coming on, it causes the function to deactivate.Consult a PEUGEOT dealer or a qualified workshop.In the event of a power steering malfunction, this warning lamp is displayed on the instrument panel, accompanied by a warning message.You must stop the vehicle.Stop as soon as it is safe to do so and switch off the ignition.Contact a PEUGEOT dealer or a qualified workshop.
For over 25 years, the PEUGEOT TOTAL partnership has pushed the boundaries of performance to achieve success in the most difficult of conditions, with victories in the Le Mans 24 Hours, in the Dakar Rally and also those by all of our Rally customers around the world. To obtain these exceptional results, the PeugeotSport teams chose TOTAL QUARTZ, a high-tech lubricant that protects the engine in the most extreme conditions.TOTAL QUARTZ protects your engine against the effects of time.TOTALQUARTZ INEO XTRA FIRST 0W-20 is a very high-performance lubricant developed jointly by the Peugeot and Total R&D teams.Specially formulated for the engines in Peugeot vehicles, its innovative technology significantly reduces CO2 emissions and effectively protects your engine against clogging.PEUGEOT & TOTALPARTNERS IN PERFORMANCE!
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131