Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual Driving Distraction detection

158Driving–presence of stationary objects (e.g.parked vehicles, safety rails, lampposts, signs).–vehicles travelling in the opposite direction.–on winding roads or in case of sharp turns.–when overtaking or being overtaken by a very long vehicle (e.g.truck, bus), which is both detected in a blind spot from behind and present in the driver's field of vision from the front.–quick overtaking manoeuvre.–very heavy traffic: vehicles detected in front and behind are confused with a lorry or a stationary object.MalfunctionIf the event of a malfunction, this warning lamp lights up on the instrument panel, accompanied by the display of a message.Have it checked by a PEUGEOT dealer or a qualified workshop.The system may be temporarily disturbed by certain weather conditions (e.g.rain, hail).In particular, driving on a wet road or going from a dry to a wet area can cause false alerts (e.g.presence of a cloud of water droplets in the blind spot interpreted as a vehicle).In bad or wintry weather, ensure that the sensors are not covered by mud, ice or snow.Take care not to cover the warning zone in the door mirrors, or the detection zones on the front and rear bumpers with adhesive labels or other objects; they may hamper correct operation of the system.Distraction detectionFor more information, refer to the General recommendations on the use of driving and manoeuvring aids.Depending on version, the function consists of either the "Driver Attention Warning" system alone or combined with the "Driver Attention Warning by Camera" system.These systems are in no way designed to keep the driver awake or to prevent the driver from falling asleep at the wheel. It is the driver’s responsibility to stop if feeling tired.Take a break if you are feeling tired or at least every 2 hours.Activation/DeactivationThe settings are changed via the Driving/Vehicle touch screen menu.The status of the function is saved when the ignition is switched off.Driver Attention WarningThe system triggers an alert when it detects that the driver has not taken a break after two hours of driving at a speed above 43 mph (70km/h).This alert is issued via the display of a message encouraging the driver to take a break, accompanied by an audible signal.If the driver does not follow this advice, the alert is repeated hourly until the vehicle is stopped.The system resets itself if one of the following conditions is met:–With the engine running, the vehicle has been stationary for more than 15 minutes.–The ignition has been switched off for a few minutes.–The driver's seat belt is unfastened and their door is opened.As soon as the speed of the vehicle drops below 43mph (70km/h), the system goes into standby.Driving time starts being counted again once the speed reaches above 43mph (70km/h).Driver Attention Warning by CameraDepending on version, the Driver Attention Warning system may be combined with the Driver Attention Warning by Camera system.
159Driving6The system assesses the driver's level of alertness, fatigue and distraction by identifying trajectory changes in relation to the lane markings.To do this, the system uses a camera, placed on the upper part of the windscreen.This system is particularly suited to fast roads (speed higher than 43 mph (70km/h)).At a first alert level, the driver is warned by the message "Be vigilant!", accompanied by an audible signal.After three first-level alerts, the system triggers a further alert with the message "Dangerous driving: take a break", accompanied by a more pronounced audible signal.The following situations may interfere with the operation of the system or prevent it from working:–poor visibility conditions (e.g.insufficient road lighting, snowfall, heavy rain, dense fog).–dazzle (e.g.headlamps of an oncoming vehicle, low sun, reflections on a wet road surface, leaving a tunnel, alternating light and shade).–windscreen area located in front of the camera: dirty, misted, frost-covered, snow-covered, damaged or covered by a sticker.–lane markings absent, worn, hidden (snow, mud) or multiple (roadworks).–close to the vehicle in front (lane markings not detected).–narrow or winding roads.In certain driving conditions (poor road surface or strong winds), the system may give alerts independent of the driver's level of vigilance.The following situations may interfere with the operation of the system or prevent it from working:–lane markings absent, worn, hidden (snow, mud) or multiple (roadworks);–close to the vehicle ahead (lane markings not detected);–roads that are narrow, winding, etc.Parking sensorsFor more information, refer to the General recommendations on the use of driving and manoeuvring aids.This system detects and signals the proximity of obstacles (e.g.pedestrian, vehicle, tree, barrier) using sensors located in the bumper.Rear parking sensors►Engage reverse gear to start the system (confirmed by an audible signal).The system is switched off when reverse gear is disengaged.Audible assistanceThe system signals the presence of obstacles which are both within the sensors’ detection zone and in the vehicle path defined by the direction of the steering wheel.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131