Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual Access Electric windows

47Access2►Immediately lock the vehicle using the remote control or the "Keyless Entry and Start" system.Only the exterior perimeter monitoring is activated; the button's red indicator lamp flashes once every second.To be taken into account, the deactivation must be carried out every time the ignition is switched off.Reactivating the interior volumetric and anti-tilt monitoring►Deactivate the exterior perimeter monitoring by unlocking the vehicle using the remote control or the "Keyless Entry and Start" system.The indicator lamp in the button goes off.►Reactivate all monitoring by locking the vehicle using the remote control or the "Keyless Entry and Start" system.The red indicator lamp in the button once again flashes every second.Triggering of the alarmThis is indicated by sounding of the siren and flashing of the direction indicators for 30 seconds.Depending on the country of sale, certain monitoring functions remain active until the alarm has been triggered eleven times consecutively.When the vehicle is unlocked using the remote control or the "Keyless Entry and Start" system, rapid flashing of the indicator lamp in the button informs you that the alarm was triggered during your absence. When the ignition is switched on, this flashing stops immediately.Failure of the remote controlTo deactivate the monitoring functions:►Unlock the vehicle using the key in the front left-hand door lock.►Open the door; the alarm is triggered.►Switch on the ignition; this stops the alarm. The indicator lamp in the button goes off.Locking the vehicle without activating the alarm►Lock or deadlock the vehicle using the key (built-in the remote control) in the driver's door lock.MalfunctionWhen the ignition is switched on, the fixed lighting of the red indicator lamp in the button indicates a system malfunction.Have it checked by a PEUGEOT dealer or a qualified workshop.Automatic activation(Depending on version)The system is activated automatically 2 minutes after the last door or the boot is closed.►To avoid triggering the alarm on entering the vehicle, first press the unlocking button on the remote control or unlock the vehicle using the "Keyless Entry and Start" system.Electric windowsType 11.Left-hand front.2.Right-hand front.Type 2
48Access1.Left-hand front2.Right-hand front3.Right-hand rear (depending on version)4.Left-hand rear (depending on version)5.Deactivation of electric window controls located by rear seats (depending on version)Manual operation►To open/close the window, press/pull the switch without passing the point of resistance; the window stops as soon as the switch is released.Automatic operation(Depending on version)►To open/close the window, press/pull the switch past its resistance point: the window opens/closes completely when the switch is released.Operating the switch again stops the movement of the window.Window controls remain operational for approximately 45 seconds after switching off the ignition or after locking the vehicle.After that time, the controls are disabled. To reactivate them, switch on the ignition or unlock the vehicle.Anti-pinch(Depending on version)If the window meets an obstacle while rising, it stops and immediately partially lowers again.Deactivating the rear controls for the rear electric windows(Type 2)For your children's safety, press control 5 to deactivate the controls for the rear electric windows, irrespective of their positions.The red indicator lamp in the button comes on and a confirmation message is displayed. The lamp will remain lit until the controls are reactivated.The rear electric windows can still be controlled using the driver's controls.Reinitialising the electric windowsAfter reconnecting the battery, or in the event of abnormal window movement, the anti-pinch function must be reinitialised.The anti-pinch function is disabled during the following sequence of operations.For each window:►Lower the window fully, then raise it; it will rise in steps of a few centimetres each time the control is pressed. Repeat the operation until the window is fully closed.►Continue to pull the control for at least one second after the window reaches the closed position.If an electric window meets an obstacle during operation, the movement of the window must be reversed. To do this, press the relevant control.When the driver operates the passengers’ electric window controls, it is important to ensure that nothing can prevent the window from closing properly.It is important to ensure that passengers use the electric windows correctly.Pay particular attention to children when operating the windows.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131