Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2020-2023 Owner's Manual Access Alarm

45Access2This roof flap at the rear is compatible only with side-hinged doors.To open the rear roof flap:–Lift the black paddle of the toggle.–Relax the toggle by pressing on the rear roof flap (downwards) then release the hook.–Lift the rear roof flap.–Move past the point of resistance to lock the rear roof flap with the support props.Never drive without the props in place. To close the rear roof flap:–Check that the support bar is properly secured.–Lower the rear roof flap.–While pressing on the rear roof flap (downwards), take the two spring rings and then place the hook in its housing.–Lower the black paddle to lock the rear roof flap.Locking the rear roof flap holds it firmly against the seal, ensuring watertight sealing with no noise.Support barThe vehicle is equipped with a support bar for transporting long loads, after opening the rear roof flap.►Fold back the support bar by lifting the lever.►Guide it to the door pillar.►Support the long loads to be transported, lift them and reposition the support bar with one hand.►Ensure that it is secured correctly by pressing the handle downwards past the point of resistance and lash the load securely.The side supports can be used as hooking points.The rear bumper has been reinforced to serve as a step when entering the vehicle.Never fasten a load to the roof flap.Never drive without the support bar in place.The rear doors will only lock when the support bar is installed.When the roof flap is open, take care when driving where height is restricted.Never rest loads directly on the rear doors.Comply with the usual indications for warning other drivers.Only use the roof flap on short trips.AlarmSystem which protects and provides a deterrent against theft and break-ins.Self-protection functionThe system checks for any malfunction in its components.The alarm is triggered if the battery, button or siren wiring is disconnected or damaged.For all work on the alarm system, contact a PEUGEOT dealer or a qualified workshop.Exterior perimeterThe system checks whether the vehicle is opened.The alarm is triggered if anyone tries to open one of the doors or the bonnet.Volumetric(without partition)
46AccessThe system checks for any variation in volume in the passenger compartment.The alarm is triggered if anyone breaks a window, enters the passenger compartment or moves inside the vehicle.(with partition)The system only checks for a variation in volume inside the cab.The alarm is triggered if anyone breaks a window or enters the vehicle’s cab.It will not be triggered if someone enters the loading area.If your vehicle is fitted with an Additional heating/ventilation system, interior volumetric monitoring is not compatible with it.For more information on the Additional heating/ventilation system, refer to the corresponding section.Anti-tiltThe system checks for any change in the attitude of the vehicle.The alarm is triggered if the vehicle is lifted or moved.When the vehicle is parked, the alarm will not be triggered if the vehicle is knocked.Locking the vehicle with full alarm systemActivation►Switch off the ignition and exit the vehicle.►Lock the vehicle using the remote control or with the "Keyless Entry and Start" system.The monitoring system is active: the red indicator lamp in the button flashes every second and the direction indicators come on for about 2 seconds.Following an instruction to lock the vehicle, the exterior perimeter monitoring is activated after 5 seconds and the interior volumetric and anti-tilt monitoring after 45 seconds.If a door, the tailgate or the bonnet is not closed properly, the vehicle is not locked but the exterior perimeter monitoring will be activated after 45 seconds at the same time as the interior volumetric and anti-tilt monitoring.Deactivation►Press the remote control unlocking button.or►Unlock the vehicle with the "Keyless Entry and Start" system.The monitoring system is deactivated: the indicator lamp in the button goes off and the direction indicators flash for about 2 seconds.If the vehicle automatically locks itself again (as happens if a door or the boot is not opened within 30 seconds of unlocking), the monitoring system is also reactivated automatically.Locking the vehicle with exterior perimeter monitoring onlyDeactivate the interior volumetric and anti-tilt monitoring to avoid the unwanted triggering of thealarm,in certain cases such as:–Slightly open window or sunroof. –Washing the vehicle.–Changing a wheel.–Towing the vehicle.–Transport on a ship or ferry.Deactivating the interior volumetric and anti-tilt monitoring►Switch off the ignition and within 10 seconds press the alarm button until its red indicator lamp is on fixed.►Get out of the vehicle.
47Access2►Immediately lock the vehicle using the remote control or the "Keyless Entry and Start" system.Only the exterior perimeter monitoring is activated; the button's red indicator lamp flashes once every second.To be taken into account, the deactivation must be carried out every time the ignition is switched off.Reactivating the interior volumetric and anti-tilt monitoring►Deactivate the exterior perimeter monitoring by unlocking the vehicle using the remote control or the "Keyless Entry and Start" system.The indicator lamp in the button goes off.►Reactivate all monitoring by locking the vehicle using the remote control or the "Keyless Entry and Start" system.The red indicator lamp in the button once again flashes every second.Triggering of the alarmThis is indicated by sounding of the siren and flashing of the direction indicators for 30 seconds.Depending on the country of sale, certain monitoring functions remain active until the alarm has been triggered eleven times consecutively.When the vehicle is unlocked using the remote control or the "Keyless Entry and Start" system, rapid flashing of the indicator lamp in the button informs you that the alarm was triggered during your absence. When the ignition is switched on, this flashing stops immediately.Failure of the remote controlTo deactivate the monitoring functions:►Unlock the vehicle using the key in the front left-hand door lock.►Open the door; the alarm is triggered.►Switch on the ignition; this stops the alarm. The indicator lamp in the button goes off.Locking the vehicle without activating the alarm►Lock or deadlock the vehicle using the key (built-in the remote control) in the driver's door lock.MalfunctionWhen the ignition is switched on, the fixed lighting of the red indicator lamp in the button indicates a system malfunction.Have it checked by a PEUGEOT dealer or a qualified workshop.Automatic activation(Depending on version)The system is activated automatically 2 minutes after the last door or the boot is closed.►To avoid triggering the alarm on entering the vehicle, first press the unlocking button on the remote control or unlock the vehicle using the "Keyless Entry and Start" system.Electric windowsType 11.Left-hand front.2.Right-hand front.Type 2
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131