Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2018-2019 Owner's Manual Safety Deactivating the front passenger airbag

84Safety►To reactivate it, turn the key to the "ON" position.When the ignition is switched on:This warning lamp comes on and remains lit to signal the deactivation.OrThis warning lamp comes on for about 1 minute to signal the activation.Recommended child seatsRange of recommended child seats secured using a three-point seat belt.Group 0+: from birth to 13 kgLocations for child seats secured using the seat beltIn accordance with European regulations, the table indicates the options for installing child seats secured using a seat belt and universally approved (c)according to the weight of the child and the seating position in the vehicle."Forward facing"You must leave the front passenger airbag active."Rearward facing"The front passenger airbag must be deactivated before installing a rearward facing child seat. Otherwise, the child risks being seriously injured or killed if the airbag deploys.Warning label - Front passenger airbagYou must comply with the following instruction, reminded by the warning label on both sides of the passenger sun visor:NEVER use a rearward facing child restraint on a seat protected by an ACTIVE AIRBAG in front of it, DEATH or SERIOUS INJURY to the CHILD can occur.Deactivating the front passenger airbagTo guarantee the safety of your child, the front passenger airbag must be deactivated when a "rear facing" child seat is installed on the front passenger seat. Otherwise, the child risks being seriously injured or killed if the airbag is deployed.Vehicles not equipped with a deactivation controlInstalling a “rear facing” child seat on the front passenger seat or bench seat is expressly prohibited! Doing so would expose the child to the risk of death or serious injury in the event of airbag deployment.Deactivating/Reactivating the front passenger airbagThe control is located on the side of the glove box.With the ignition off:►To deactivate the airbag, turn the key in the switch to the "OFF" position.
85Safety5►To reactivate it, turn the key to the "ON" position.When the ignition is switched on:This warning lamp comes on and remains lit to signal the deactivation.OrThis warning lamp comes on for about 1 minute to signal the activation.Recommended child seatsRange of recommended child seats secured using a three-point seat belt.Group 0+: from birth to 13 kgGroup 0+: from birth to 13 kgL1"RÖMER Baby-Safe Plus"Installed in the "rearward facing" position.Groups 2 and 3: from 15 to 36 kgL5"RÖMER KIDFIX XP"Can be fitted to the vehicle's ISOFIX mountings.The child is restrained by the seat belt.Only suitable for installation on the side rear seats.The head restraint on the vehicle seat must be removed.Groups 2 and 3: from 15 to 36 kgL6"GRACO Booster"The child is restrained by the seat belt.Only suitable for installation on the front passenger seat or on the rear side seats.Locations for child seats secured using the seat beltIn accordance with European regulations, the table indicates the options for installing child seats secured using a seat belt and universally approved (c)according to the weight of the child and the seating position in the vehicle.
86Safety"ISOFIX" mountingsRow 2* On some versions, the central seat is not equipped with ISOFIX mountings.The vehicle has been approved in accordance with the latest ISOFIX regulation.If fitted on the vehicle, the regulation ISOFIX mountings are identified by labels.Child weight and age guideSeatUnder 13kg(groups0 (d)and0+)Up to about 1 year oldFrom 9 to 18kg(group 1)From about 1 to 3 years old 15-25 kg(group2)From about 3 to 6 years old 22-36 kg(group3)From about 6 to 10 years oldRow 1 (a)Fixed passenger seatXPassenger seat with forwards and backwards adjustmentWith passenger airbag deactivated "OFF"U (f)With passenger airbag activated "ON"XUF (f)Row2 (b) (e)URow3 (b) (e)U (g) (h)Key(a) Refer to the current legislation in the country in which you are driving before placing a child in this seat position.(b) To install a rearward-facing or forward-facing child seat on a rear seat, adjust the rear seat to the fully back position with the backrest straightened.(c) Universal child seat: child seat suitable for installation in all vehicles using the seat belt.(d) Group 0: from birth to 10kg. Carrycots and "car" infant carriers must not be installed on the front passenger seat(s) or the seats in row 3.(e) To install a rearward-facing or forward-facing child seat on a rear seat, move the seats in front of it forward, then straighten their backrests to allow sufficient room for the child seat and the child's legs.(f) With the fixed passenger seat (which cannot be placed in the folded position), adjust the backrest angle to 0°.For more information on the Front seats and, in particular, the folded position for the backrest, refer to the corresponding section.(g) On the Standard version, fold down the backrests in row2.(h) Installing child seats with a support leg is prohibited in the third row.U Seat position suitable for installing a child seat secured using the seat belt and universally approved for rearward-facing and/or forward-facing use.UF Seat position suitable for installing a child seat secured using a seat belt and universally approved for forward-facing use.X Seat position not suitable for installing a child seat for the stated weight class.
87Safety5"ISOFIX" mountingsRow 2* On some versions, the central seat is not equipped with ISOFIX mountings.The vehicle has been approved in accordance with the latest ISOFIX regulation.If fitted on the vehicle, the regulation ISOFIX mountings are identified by labels.The mountings comprise three rings for each seat:–Two front rings A, located between the vehicle seat backrest and cushion, indicated by an "ISOFIX" marking,–If fitted to your vehicle, a rear ring B, located behind the vehicle's seat, called Top Tether, for securing the upper strap, indicated by a "Top Tether" marking.The Top Tether secures the upper strap of child seats that have them. In case of frontal impact, this device limits the tilting of the child seat forward.This ISOFIX mounting system provides fast, reliable and safe fitting of the child seat in the vehicle.The ISOFIX child seats are fitted with two latches which are secured on the two front rings A.Some child seats also have an upper strap which is attached to rear ring B.To secure the child seat to the Top Tether:–remove and stow the head restraint before installing a child seat on this seat (refit it once the child seat has been removed),–pass the strapof thechild seat over the top of the seat backrest, centring it between the openings for the head restraint rods,–attach the hook of the upper strap to rear ring B,–tighten the upper strap.Incorrect installation of a child seat in a vehicle compromises the protection of the child in the event of an accident.Strictly follow the fitting instructions provided in the installation guide supplied with the child seat.Recommended ISOFIX child seatsAlso consult the user guide from the child seat’s manufacturer to find out how to install and remove the seat."RÖMER Baby-Safe Plus and its ISOFIX base"(size category: E)Group 0+: from birth to 13 kg
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131