Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2018-2019 Owner's Manual Practical information Energy economy mode

142Practical informationSwitching to the modeA message indicating that the vehicle has switched to economy mode is displayed on the instrument panel screen and the active functions are put on standby.If a telephone call is in progress at the time, it will be maintained for around 10 minutes using your audio system’s hands-free system.Exiting the modeThese functions will be automatically reactivated the next time the vehicle is used.In order to restore the use of these functions immediately, start the engine and let it run:–for less than 10 minutes, to use the equipment for approximately 5 minutes,–for more than 10 minutes, to use the equipment for approximately 30 minutes.Let the engine run for the duration specified to ensure that the battery charge is sufficient.Do not repeatedly and continuously restart the engine in order to charge the battery.A flat battery prevents the engine from starting.For more information on the 12 V battery, refer to the corresponding section.Towing device with quickly detachable towballNo tools are required to install or remove this genuine towing device.Trailers with LED lamps are not compatible with the wiring harness of this device.Fitting►On the towball, move the lever from position 1 to position 2.►Before fitting the towball, check that the contact points (shown by the arrows) are clean. Use a soft, clean cloth.►Insert the end of the towball into the carrier, located underneath the rear bumper, as far as it can go.►Secure the towball correctly by moving the lever to position 3 ("locked" position).►If necessary, pivot the socket downwards, paying attention to the exhaust pipe.►Connect the trailer plug to the 13-pin socket provided next to the carrier.►Secure the trailer by connecting its safety cable to the eye on the carrier.Removing►On the towball, move the lever from position 3 to position 2.►Remove the towball by pulling it towards you.►Once the towball has been removed, move the lever from position 2 to position 1.If the towball is not locked, the trailer can detach. This may cause an accident.Always lock the towball as described in the instructions.Observe the legislation in force in the country in which you are driving.Remove the towball when not in use.Before starting the vehicle, check that the trailer lamps operate correctly.Before setting off, check the adjustment of the headlamp beam height.Connect the trailer plug with the engine off.If you connect the trailer plug within a few minutes of switching off the engine, do not touch the exhaust pipe. Risk of burns!Carrier systems (box or bicycle carrier)Always comply with the maximum load authorised on the towing device: if exceeded, the device may detach from the vehicle, potentially causing a serious accident.For more information about the Engine technical data and towed loads and in particular, the maximum load on the towing device, refer to the corresponding section.Remove the quickly detachable towball when not towing a trailer.Energy economy modeSystem which manages the duration of use of certain functions to conserve a sufficient level of charge in the battery.After switching off the engine and for a maximum cumulative period of around 40 minutes, you can continue to use functions such as the audio and telematics system, the wipers, the dipped beam headlamps, the courtesy lamps, etc.
143Practical information7Switching to the modeA message indicating that the vehicle has switched to economy mode is displayed on the instrument panel screen and the active functions are put on standby.If a telephone call is in progress at the time, it will be maintained for around 10 minutes using your audio system’s hands-free system.Exiting the modeThese functions will be automatically reactivated the next time the vehicle is used.In order to restore the use of these functions immediately, start the engine and let it run:–for less than 10 minutes, to use the equipment for approximately 5 minutes,–for more than 10 minutes, to use the equipment for approximately 30 minutes.Let the engine run for the duration specified to ensure that the battery charge is sufficient.Do not repeatedly and continuously restart the engine in order to charge the battery.A flat battery prevents the engine from starting.For more information on the 12 V battery, refer to the corresponding section.Load reduction modeSystem that manages the use of certain functions according to the level of charge remaining in the battery.When the vehicle is being driven, the load reduction function temporarily deactivates certain functions, such as the air conditioning and the heated rear screen.The deactivated functions are reactivated automatically as soon as conditions permit.Roof bars / Roof rackRecommendationsDistribute the load uniformly, taking care to avoid overloading one of the sides.Arrange the heaviest part of the load as close as possible to the roof.Secure the load firmly.Drive gently: the vehicle will be more susceptible to the effects of side winds and its stability may be affected.Regularly check the security and tight fastening of the roof bars and racks, at least before each trip.Remove the roof bars once they are no longer needed.In the event of loading (not exceeding40 cm in height) on the roof, do not exceed the following loads:–Transverse bars on longitudinal bars: 80kg.–Two transverse bars bolted to the roof: 100kg.–Three transverse bars bolted to the roof: 150kg.–An aluminium rack: 120kg.–A steel rack: 115kg.If the height exceeds 40cm, adapt the speed of the vehicle to the profile of the road to avoid damaging the roof bars or the roof rack and the fixings on the vehicle.Refer to national legislation in order to comply with the regulations for transporting objects that are longer than the vehicle.In the event of loading a 7-seat model (not exceeding 40 cm in height) on the roof, do not exceed the following loads:–Three transverse bars bolted to the roof: 100kg.–An aluminium rack: 70kg.–A steel rack: 65kg.As a safety measure and to avoid damaging the roof, it is essential to use
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131