Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2018-2019 Owner's Manual Practical information Advice on care and maintenance

151Practical information7In order not to overfill the AdBlue® tank:–Add between 10 and 13 litres using AdBlue® containers.–Stop after the nozzle’s first automatic cut-out, if you are refilling at a service station.If the AdBlue® tank is completely empty – which is confirmed by the “Top upAdBlue: Starting impossible” message – it is essential to add at least 5 litres.After refilling►Refit the blue cap to the tank filler and turn it clockwise, as far as it will go.►Close the fuel filler flap.Do not dispose of AdBlue®bottles or containers in the household waste.Place them in a container reserved for this purpose or take them back to where you purchased them.Free-wheelingIn certain situations, you must allow the vehicle to free-wheel (while being towed, on a rolling road, in an automatic car wash, or being transported by rail or sea freight, etc.).The procedure varies according to the type of gearbox and parking brake.With a manual gearbox and electric parking brake / Release procedure►With the engine running and while depressing the brake pedal, move the gear selector to the neutral position.►While depressing the brake pedal, switch off the ignition.►Release the brake pedal, then switch on the ignition again.►While depressing the brake pedal, press the control lever to release the parking brake.►Release the brake pedal, then switch off the ignition.Reverting to normal operation►While depressing the brake pedal, start the engine.With an automatic gearbox and electric parking brake / Release procedure►With the engine running and while depressing the brake pedal, set the gear selector to N.►While depressing the brake pedal, switch off the ignition.►Release the brake pedal, then switch on the ignition again.►While depressing the brake pedal, press the control lever to release the parking brake.►Release the brake pedal, then switch off the ignition.Reverting to normal operation►While depressing the brake pedal, start the engine.Keyless Entry and StartingYou must not depress the brake pedal while switching the ignition on or off. If you do, the engine will start, requiring you to restart the procedure.Advice on care and maintenanceGeneral recommendationsObserve the following recommendations to avoid damaging your vehicle.ExteriorNever use a high-pressure jet wash in the engine compartment, due to the risk of damaging electrical components.Do not wash the vehicle in strong sunshine or extremely cold conditions.
152Practical informationWhen washing the vehicle at an automatic roller-brush car wash, be sure to lock the doors and, depending on version, remove the electronic key.When using a pressure washer, hold the lance at least 30 cm from the vehicle (particularly when cleaning areas containing chipped paint, sensors or seals).Promptly clean up any stains containing chemicals liable to damage the vehicle's paint (including tree resin, bird droppings, insect secretions, pollen and tar).If justified by the environment, clean the vehicle more frequently to remove salty deposits (in coastal areas), soot (in industrial estates) and mud (in wet or cold areas). These substances can be highly corrosive.Contact a PEUGEOT dealer or a qualified workshop if you require advice on removing stubborn stains requiring special products (such as tar or insect removers).Preferably, have paint touch-ups performed by a PEUGEOT dealer or a qualified workshop.InteriorWhen washing the vehicle, never use a water hose or high-pressure washer to clean the interior.Liquids carried in cups or other open containers can spill, presenting a risk of damage if they come into contact with the controls in the dashboard and centre console. Take care!BodyworkHigh-gloss paintDo not use abrasive products or solvents, petrol or oil to clean the bodywork.Never use an abrasive sponge to clean stubborn stains. Risk of scratching the paintwork!Do not apply polish in strong sunshine, or to plastic or rubber parts.Use a soft sponge and soapy water or a pH neutral product.Gently wipe the bodywork with a clean microfibre cloth.Apply polish with the vehicle clean and dry.Comply with the instructions for use stated on the product.Decals(Depending on version)Do not use a high pressure washer to clean the vehicle. Risk of damaging or detaching the decals!Use a high-flow hose at a temperature between 25°C and 40°C.Sweep the jet of water across the surface to be cleaned, perpendicular to it.Rinse the vehicle with demineralised water.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131