Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2018-2019 Owner's Manual Lighting and visibility Changing a wiper blade

67Lighting and visibility4After refitting a windscreen wiper blade►To return the wiper blades to their initial position, switch on the ignition and operate the wiper control stalk.Changing a wiper bladeRemoving/refitting at the front►Carry out these wiper blade replacement operations from the driver's side.►Starting with the wiper blade farthest from you, hold each arm by the rigid section and raise it as far as possible.Take care not to hold the arms at the jet locations.Do not touch the wiper blades. Risk of irreparable deformation.Do not release them while moving them. Risk of damaging the windscreen!►Clean the windscreen using screenwash fluid.Do not apply "Rain X" type water-repellent products.►Unclip the worn wiper blade closest to you and remove it.►Install the new wiper blade and clip it to the arm.►Repeat the procedure for the other wiper blade.►Starting with the wiper blade closest to you, once again hold each arm by the rigid section, then guide it carefully onto the windscreen.Removing/refitting at the rear►Hold the arm by the rigid section and raise it as far as possible.►Clean the rear screen using screenwash fluid.►Unclip the worn wiper blade and remove it.►Install the new wiper blade and clip it to the arm.►Once again hold the arm by the rigid section, then guide it carefully onto the rear screen.Automatic windscreen wipersThe windscreen wipers operate automatically once rain is detected (sensor behind the rear view mirror), adapting their speed to the intensity of the rain without any action on the part of the driver.Switching onBriefly push the control stalk downwards.A wiping cycle confirms that the instruction has been accepted.Depending on version, this symbol appears in the display screen or this indicator lamp comes on on the instrument panel and a message is displayed.OffGive the control stalk another brief push downwards or place the control stalk in another position (Int, 1 or 2).This indicator lamp goes off on the instrument panel and a message is displayed.If the ignition has been off for more than one minute, the automatic wipers must
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131