Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2018-2019 Owner's Manual In the event of a breakdown Temporary puncture repair kit

154In the event of a breakdown4.12V compressor with a cartridge of sealant and a speed limit stickerFor temporary repair of a tyre and to adjust the tyre pressure.For more information about the Temporary puncture repair kit, refer to the corresponding section.With spare wheel5.Wheelbrace.For removing the wheel bolts and raising/lowering the jack.6.Jack.Used to raise the vehicle.7.Wheel bolt cover/wheel trim removal tool (depending on equipment).If present on the vehicle, used to remove the wheel bolt covers on alloy wheels or the wheel trim on steel wheels.8.Socket for the “security” wheel bolts.For adapting the wheelbrace to the special "security" bolts.For more information on the Spare wheel, please refer to the corresponding section.All of these tools are specific to your vehicle and may vary depending on equipment.Do not use them for any other purposes.The jack must only be used to change a wheel with a damaged or punctured tyre.The jack does not require any maintenance.The jack meets European standards, as defined in the Machinery Directive 2006/42/CE.Certain parts of the jack such as the screw thread or the joints could cause injury: avoid touching them.Carefully remove all traces of lubrication grease.Temporary puncture repair kitScan the QR code on page 3 to view explanatory videos.Comprising a compressor and a sealant cartridge, it allows the temporary repair of a tyre so that you can drive to the nearest garage.It is designed to repair most punctures which could affect the tyre, located on the tyre tread or shoulder.The vehicle's electric system allows the connection of the compressor for long enough to inflate a tyre after a puncture repair.For more information on the Tool kit, refer to the corresponding section.Repair procedure Do not remove any foreign bodies (e.g. nail, screw) which have penetrated into the tyre.►Park the vehicle without obstructing traffic and apply the parking brake.►Follow the safety instructions (hazard warning lamps, warning triangle, high visibility
155In the event of a breakdown8vest, etc.) according to the legislation in force in the country of driving.►Switch off the ignition.►Remove the valve cap from the tyre to be repaired, and place it in a clean area.►Connect the hose from the bottle of sealant to the valve of the tyre to be repaired and tighten firmly.►Connect the pipe from the compressor to the bottle of sealant.►Check that the compressor switch is in position"O".►Fully uncoil the electric cable stowed under the compressor.►Connect the compressor's electric plug to the vehicle's 12V socket.Only the 12V socket located at the frontof the vehicle can be used to power the compressor.►Affix the speed limit sticker.The speed limit sticker must be secured to the interior of the vehicle in the area close to the driver, to remind the driver that a wheel is in temporary use.The tyre inflation pressures are given on this label.►Switch on the ignition.►Switch on the compressor by moving switch to position "I" until the tyre pressure reaches 2 bars. The sealant product is injected under pressure into the tyre; do not disconnect the pipe from the valve during this operation (risk of blowback).If after approximately 7minutes the pressure of 2bars is not reached, this indicates that the tyre is not repairable; contact a PEUGEOT dealer or a qualified workshop for assistance.►Move the switch to position "O".►Disconnect the compressor's electric plug from the vehicle's 12V socket.►Refit the cap on the valve.►Remove the kit.►Remove and store the bottle of sealant.The sealant product is harmful if swallowed and causes irritation to the eyes.Keep this product out of the reach of children.The use-by date of the fluid is marked on the bottle.After use, do not discard the bottle in standard waste, take it to a PEUGEOT dealer or an authorised waste disposal site.Do not forget to obtain a new bottle of sealant, available from a PEUGEOT dealer or a qualified workshop.►Drive immediately for approximately 3miles (5kilometres) at reduced speed (between 12 and 37 mph (20 and 60km/h)) to plug the puncture.►Stop to check the repair and the tyre pressure using the kit.
156In the event of a breakdownWith a tyre repaired using this type of kit, do not exceed a speed of 50mph (80km/h) and do not drive more than 125miles (200km).Contact a PEUGEOT dealer or a qualified workshop to have the tyre changed.Checking / adjusting tyre pressuresThe compressor can be used, without injecting sealant, to check and, if necessary, adjust the tyre pressures.►Remove the valve cap from the tyre and keep it in a clean place.►Uncoil the pipe stowed under the compressor.►Screw the pipe onto the valve and tighten firmly.►Check that the compressor switch is in position "O".►Fully uncoil the electric cable stowed under the compressor.►Connect the compressor's electric plug to the vehicle's 12V socket.►Switch on the ignition.Only the 12V socket located at the frontof the vehicle can be used to power the compressor.The tyre inflation pressures are given on this label.►Start the compressor by placing the switch at position "I" and adjust the pressure to the value shown on the vehicle's tyre pressure label. To deflate: press the black button located on the compressor pipe, near the valve connection.If after 7minutes the pressure of 2bars is not reached, this indicates that the tyre is damaged; contact a PEUGEOT dealer or a qualified workshop for assistance.►Once the correct pressure is reached, put the switch in position "O".►Remove the kit and stow it.Should the pressure of one or more tyres be adjusted, it is necessary to reinitialise the under-inflation detection system.For more information on Tyre under-inflation detection, refer to the corresponding section.Spare wheelScan the QR code on page 3 to view explanatory videos.Procedure for changing a damaged wheel with the spare wheel using the tools provided with the vehicle.For more information on the Tool kit, refer to the corresponding section.►Park the vehicle, taking care to avoid obstructing traffic, and apply the parking brake.►Follow the safety instructions (hazard warning lamps, warning triangle, wearing high visibility vest, etc.) according to the legislation in force in the country where you are driving.►Switch off the ignition.Access to the spare wheel►Access to the spare wheel is from the rear.►If your vehicle is fitted with a towbar, raise the rear of the vehicle using the jack (must be at jacking point B) to allow sufficient space to remove the spare wheel.Removing the spare wheel from the carrier►Depending on version, open the tailgate or side-hinged doors.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131