Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2018-2019 Owner's Manual In the event of a breakdown Changing a fuse

164In the event of a breakdownThe extraction tweezers are located behind the fusebox cover.►Unclip the cover by pulling at the top left, then right.►Remove the cover completely.►Take the tweezers from their housing.Changing a fuseBefore changing a fuse:►Identify the cause of the fault and fix it.►Stop all power consumption.►Immobilise the vehicle and switch the ignition off.►Identify the defective fuse using the current allocation tables and diagrams.To replace a fuse, it is essential to:►Use the special tweezers to extract the fuse from its housing and check the condition of its filament.►Always replace the failed fuse with a fuse of the same rating (same colour); use of a different rating may cause malfunctions - risk of fire!If the fault recurs after replacing a fuse, have the electrical system checked by a PEUGEOT dealer or a qualified workshop.The fuse allocation tables and the corresponding diagrams are available from a PEUGEOT dealer or from a qualified workshop.The replacement of a fuse not shown in the allocation tables may cause a serious ►Open the tabs, then pull out the lamp holder.►Remove the faulty bulb by pressing lightly on it while turning it a quarter turn anti-clockwise.►Replace the bulb.Take care to reposition the tabs and the wiring correctly to avoid trapping the wire.After changing a rear direction indicator bulb, the reinitialisation time is approximately 2 minutes or more.Number plate lampsType A, W5W - 5WWith side-hinged doors►Unclip the interior trim.►Disconnect the connector by moving aside its tab.►Turn the bulb holder a quarter turn anti-clockwise.►Change the bulb.►Put the bulb holder back in place and reconnect the connector.►Put the trim back in place.With tailgate►Remove the plastic lens using a screwdriver.►Change the bulb.►Refit the plastic lens and press on it.Third brake lampType A, W16W - 16W–Unscrew the two nuts.–Push the rods.–If necessary, disconnect the connector to remove the lamp.–Replace the bulb.Changing a fuseAccessing the tools
165In the event of a breakdown8The extraction tweezers are located behind the fusebox cover.►Unclip the cover by pulling at the top left, then right.►Remove the cover completely.►Take the tweezers from their housing.Changing a fuseBefore changing a fuse:►Identify the cause of the fault and fix it.►Stop all power consumption.►Immobilise the vehicle and switch the ignition off.►Identify the defective fuse using the current allocation tables and diagrams.To replace a fuse, it is essential to:►Use the special tweezers to extract the fuse from its housing and check the condition of its filament.►Always replace the failed fuse with a fuse of the same rating (same colour); use of a different rating may cause malfunctions - risk of fire!If the fault recurs after replacing a fuse, have the electrical system checked by a PEUGEOT dealer or a qualified workshop.The fuse allocation tables and the corresponding diagrams are available from a PEUGEOT dealer or from a qualified workshop.The replacement of a fuse not shown in the allocation tables may cause a serious malfunction of your vehicle. Contact a PEUGEOT dealer or a qualified workshop.GoodFailedTweezersInstalling electrical accessoriesYour vehicle's electrical system is designed to operate with standard or optional equipment.Before installing other electrical equipment or accessories on your vehicle, contact a PEUGEOT dealer or a qualified workshop.PEUGEOT will not accept responsibility for the cost incurred in repairing your vehicle or for rectifying malfunctions resulting from the installation of accessories not supplied and not recommended by PEUGEOT and not installed in accordance with its instructions, in particular when the combined consumption of all of the additional equipment connected exceeds 10 milliamperes.For more information on installing a towbar or TAXI type equipment, contact a PEUGEOT dealer.Dashboard fusesThe fusebox is placed in the lower dashboard (left-hand side).Access to the fuses►Unclip the cover by pulling at the top left, then right.The fuses described below vary according to the equipment in your vehicle.Fuse No.Rating (A)FunctionsF110Wireless smartphone charger, interior electrochrome rear view mirror.
166In the event of a breakdownLead-acid starter batteriesBatteries contain harmful substances such as sulphuric acid and lead.They must be disposed of in accordance with regulations and must not, in any circumstances, be discarded with household waste.Take used remote control batteries and vehicle batteries to a special collection point.Protect your eyes and face before handling the battery.All operations on the battery must be carried out in a well ventilated area and away from naked flames and sources of sparks, so as to avoid the risk of explosion or fire.Wash your hands afterwards.Versions equipped with Stop & Start are fitted with a 12 V lead-acid battery with special technology and specifications.It should only be replaced by a PEUGEOT dealer or a qualified workshop.Access to the batteryThe battery is located under the bonnet.►Open the bonnet using the interior release lever, then the exterior safety catch.►Secure the bonnet stay.Fuse No.Rating (A)FunctionsF415Horn.F620Screenwash pump.F71012 V socket (rear).F1030Electric locks module.F1310Telematics and radio controls.F145Alarm, advanced telematic unit.F193Trailer interface unit.F235Generic trailer interface unit.F275Additional heating.F2920Audio system, touch screen.F3115Audio system (as an accessory).F321512 V socket (front).Fuse No.Rating (A)FunctionsF345Mirror control.F365USB port.Engine compartment fusesThe fusebox is placed in the engine compartment near the battery.Access to the fuses►Release the two latches A.►Remove the cover.►Change the fuse.►When you have finished, close the cover carefully then engage the two latches A, to ensure correct sealing of the fusebox.Fuse No.Rating(A)FunctionsF1615Front foglamp.F1810Right-hand main beam headlamp.F1910Left-hand main beam headlamp.F2940Windscreen wipers.12V batteryProcedure for starting the engine using another battery or charging a discharged battery.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131