Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2018-2019 Owner's Manual Ease of use and comfort Front seats

37Ease of use and comfort3General recommendations for the seatsFor safety reasons, seat adjustments must only be made when the vehicle is stationary.Folding or unfolding the seat backrests must only be done with the vehicle stationary.Before moving the seat backwards, ensure that there is no person or object that might prevent the full travel of the seat.There is a risk of trapping or pinching passengers if present in the rear seats or of jamming the seat if large objects are placed on the floor behind the seat.Do not place hard or heavy objects on the backrests forming a table. They could become dangerous projectiles in the event of sudden braking or a collision.–Do not remove a head restraint without stowing it; secure it to a support inside the vehicle.–Check that the seat belts remain accessible to the passenger and easy to fasten.–Passengers must never take their seat without adjusting and fastening their seat belt.–In row 3, be careful not to leave your feet under the row 2 seat while it is being tilted.–When a row 3 seat is in the fully folded position, ensure that the strap is correctly hooked to the Top Tether fixing of the row 2 backrest: risk of unexpected tipping of the seat.Before carrying out the manoeuvres, check that nothing and no one is obstructing the moving elements and their locking.To avoid sudden folding, take care to hold the backrest and support it until it is horizontal.Never put your hand underneath the seat cushion to guide the seat downwards or upwards, you could get your fingers trapped. Place your hand on the grip/strap (depending on equipment) at the top of the seat cushion.Please note: an incorrectly latched backrest compromises the safety of passengers in the event of sudden braking or an impact.The contents of the boot may be thrown forward - risk of severe injury!Front seatsPEUGEOTi-CockpitBefore taking to the road and to make the most of the ergonomic layout of the PEUGEOT i-Cockpit, carry out these adjustments in the following order:–head restraint height.–seat backrest angle.–seat cushion height.–longitudinal seat position.–steering wheel depth and then height.–rear view mirror and door mirrors.Once these adjustments have been made, check that the "head up" instrument panel can be viewed correctly over the smaller diameter steering wheel.
38Ease of use and comfortRefitting the armrest►Slot the armrest into the backrest, ensuring that you align the bayonet lugs with the holes.►Push the armrest shaft towards the backrest.►While holding it in this position, rotate the armrest towards the front. The armrest is once again secured onto the backrest.Retractable positionAdjustmentsLongitudinal►Raise the control and slide the seat forwards or backwards.Height(driver only)►If the vehicle is so equipped, pull the control upwards to raise or push it downwards to lower, as many times as necessary to obtain the position required.For more information on the Seat belts, refer to the corresponding section.Tilting the backrest►Push the control backwards then use your weight and your legs to adjust the backrest.Lumbar(driver only)►Turn the knob manually to obtain the desired level of lumbar support.Armrest►To put the armrest in the vertical position, raise it until it locks into place.►Lower the armrest to return it to the position for use.The armrest can be removed from the passenger seat.Removing the armrest►Raise the armrest into the vertical position.►Push the armrest shaft towards the backrest.►While holding it in this position, rotate the armrest towards the rear.►Pull the armrest to detach it from the backrest.
39Ease of use and comfort3Refitting the armrest►Slot the armrest into the backrest, ensuring that you align the bayonet lugs with the holes.►Push the armrest shaft towards the backrest.►While holding it in this position, rotate the armrest towards the front. The armrest is once again secured onto the backrest.Retractable position►If the centre console inconveniences you, remove the passenger's seat armrest.►Push the control rearwards fully to tilt and guide the assembly.This position allows you to transport long loads inside the vehicle with the doors closed.When retracted, the maximum permitted weight on the backrest is 50kg.►To reposition the seat cushion, raise the backrest until it locks in the raised position.Heated seat control►Approximately 30 seconds after starting the engine, press the control.The temperature is controlled automatically.Pressing again interrupts operation.If you press the control while the engine is not running, the request will be memorised for approximately 2 minutes. Do not use the function when the seat is not occupied.Reduce the heating intensity as soon as possible.When the seat and passenger compartment have reached a satisfactory temperature, switch the function off; reducing electricity consumption in turn decreases fuel consumption.Prolonged use of the heated seats is not recommended for those with sensitive skin.There is a risk of burns for people whose perception of heat is impaired (illness, taking medication, etc.).To keep the heated pad intact and to prevent a short circuit:–do not place sharp or heavy objects on the seat,–do not kneel or stand on the seat,–do not spill liquids onto the seat,–never use the heating function if the seat is wet.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131