Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2018-2019 Owner's Manual Driving Speed limiter

112Driving►Press button2once to save the suggested speed value.A message is displayed, confirming the request.►Press button2again to confirm and save the new speed setting.After a predetermined period, the screen returns to the normal display.Extended Traffic Sign RecognitionRefer to the General recommendations on the use of driving and manoeuvring aids.This additional system recognises these road signs and displays them in the instrument panel if the appropriate display mode is selected.One-way street: if you start driving the wrong way down a one-way street, an alert message, including the sign's symbol, is displayed in the instrument panel (request to check the traffic direction).Other signs: when approaching one of these signs, the sign’s symbol is displayed in the instrument panel.The actual road signs always take priority over the display from the system.The signs must comply with the Vienna Convention on road signs.Activation / DeactivationIt is set viathe vehicle configuration menu.Speed limiterRefer to the General recommendations on the use of driving and manoeuvring aids.This system prevents the vehicle from exceeding the speed programmed by the driver (speed setting).The speed limiter is switched on manually.The minimum speed setting is 19 mph (30km/h).The speed setting remains in the system memory when the ignition is switched off.Steering mounted control1.ON (LIMIT position) / OFF (position 0)2.Reduce the speed setting3.Increase the speed setting4.Pause / resume speed limiter with the speed setting previously stored5.Depending on version:Display of speed thresholds recorded using Memorising speedsorUse the speed suggested by the Speed Limit Recognition and Recommendation (MEMdisplay)6.Display and adjustment of the programmed inter-vehicle distanceFor more information on Memorising speedsor on the Speed Limit Recognition and Recommendation, refer to the corresponding sections.Information displayed on the instrument panel6.Speed limiter mode selection indication7.Speed limiter on/pause status indication8.Programmed speed setting value9.Speed suggested by the Speed Limit Recognition and RecommendationSwitching on/pausing►Turn thumbwheel1 to the "LIMIT" position to select the speed limiter; the function is paused.►If you are satisfied with the limit speed setting (most recent speed setting programmed in the system), press button4 to switch the speed limiter on.►Pressing button 4again temporarily pauses the function.An audible warning will sound if the vehicle's speed exceeds the speed setting for an extended period.Adjusting the limit speed settingYou do not have to switch the speed limiter on in order to set the speed.To modify the limit speed setting based on the vehicle’s current speed:
113Driving69.Speed suggested by the Speed Limit Recognition and RecommendationSwitching on/pausing►Turn thumbwheel1 to the "LIMIT" position to select the speed limiter; the function is paused.►If you are satisfied with the limit speed setting (most recent speed setting programmed in the system), press button4 to switch the speed limiter on.►Pressing button 4again temporarily pauses the function.An audible warning will sound if the vehicle's speed exceeds the speed setting for an extended period.Adjusting the limit speed settingYou do not have to switch the speed limiter on in order to set the speed.To modify the limit speed setting based on the vehicle’s current speed:►Briefly press button2 or 3 to change the value in steps of +or -1mph (1.6 km/h).►Press and hold button2 or 3 to change the value in steps of +or -5mph (8 km/h).To change the limit speed setting using memorised speeds, via the touch screen:►press button5 to display the memorised speed settings,►press the button for the desired speed setting.The selection screen closes after a few moments.This setting becomes the new limit speed.To change the limit speed setting based on the speed suggested by the Speed Limit Recognition and Recommendation:►the suggested speed is displayed on the instrument panel,►press button5 once; a message is displayed, confirming the memorisation request,►press button5 again to save the suggested speed.The speed is immediately displayed as the new speed setting on the instrument panel.Temporarily exceeding the speed setting►Press the accelerator pedal down fully.The speed limiter is deactivated temporarily and the displayed speed setting flashes.Release the accelerator pedal to return to below the programmed speed.When the limit speed is exceeded but this is not due to action by the driver (in case of a steep slope, for example), an audible signal triggers immediately.On a steep descent or in the event of sharp acceleration, the speed limiter will not be able to prevent the vehicle from exceeding the speed setting.Brake if necessary to control the speed of your vehicle.Once the speed of the vehicle returns to the programmed setting, the speed limiter functions again: the display of the speed setting becomes fixed again.Switching off►Turn the thumbwheel 1 to the "0" position: the display of information on the speed limiter disappears.
114DrivingMalfunctionDashes are displayed (flashing, initially, then fixed) in the event of a speed limiter malfunction.Have the system checked by a PEUGEOT dealer or a qualified workshop.Cruise control - particular recommendationsFor the safety of everyone, only use the cruise control where the driving conditions allow running at a constant speed and keeping an adequate safety distance.Remain vigilant when the cruise control is activated. If you hold one of the speed setting modification buttons, a very rapid change in the speed of your vehicle may occur.When descending a steep hill, the cruise control system cannot prevent the vehicle from exceeding the set speed. Brake if necessary to control the speed of your vehicle.On steep climbs or when towing, the set speed may not be reached or maintained.Exceeding the programmed speed settingYou can temporarily exceed the speed setting by pressing the accelerator pedal (the programmed speed flashes).To return to the speed setting, release the accelerator pedal (when the set speed is reached again, the displayed speed stops flashing).Operating limitsNever use the system in the following situations:–in an urban area with the risk of pedestrians crossing the road,–in heavy traffic,–on winding or steep roads,–on slippery or flooded roads,–in unfavourable climatic conditions,–driving on a speed circuit,–driving on a rolling road,–use of snow chains, non-slip covers or studded tyres.Programmable cruise controlRefer to the General recommendations on the use of driving and manoeuvring aids and to Cruise control - particular recommendations.This system automatically keeps the vehicle’s speed at the cruise value programmed by the driver (speed setting), without using the accelerator pedal.The cruise control is switched on manually.It requires a minimum vehicle speed of 25 mph (40km/h).With a manual gearbox, third gear or higher must be engaged.With an automatic gearbox, modeD or second gear or higher in modeM must be engaged.The cruise control remains active after changing gear, regardless of the gearbox type, on engines fitted with Stop & Start.Switching off the ignition cancels any speed setting.Steering mounted control1.ON (CRUISE position) / OFF (position 0)2.Activation of cruise control at the current speed / decrease speed setting3.Activation of cruise control at the current speed / increase speed setting4.Pausing / resumption of cruise control with the speed setting previously stored5.Depending on version:Display of speed thresholds recorded using Memorising speedsorUse the speed suggested by the Speed Limit Recognition and Recommendation (MEMdisplay)For more information on Memorising speedsor on the Speed Limit Recognition and Recommendation, refer to the corresponding sections.Information displayed on the instrument panel6.Cruise control mode selection indication
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131