Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2018-2019 Owner's Manual Driving Programmable cruise control

114DrivingMalfunctionDashes are displayed (flashing, initially, then fixed) in the event of a speed limiter malfunction.Have the system checked by a PEUGEOT dealer or a qualified workshop.Cruise control - particular recommendationsFor the safety of everyone, only use the cruise control where the driving conditions allow running at a constant speed and keeping an adequate safety distance.Remain vigilant when the cruise control is activated. If you hold one of the speed setting modification buttons, a very rapid change in the speed of your vehicle may occur.When descending a steep hill, the cruise control system cannot prevent the vehicle from exceeding the set speed. Brake if necessary to control the speed of your vehicle.On steep climbs or when towing, the set speed may not be reached or maintained.Exceeding the programmed speed settingYou can temporarily exceed the speed setting by pressing the accelerator pedal (the programmed speed flashes).To return to the speed setting, release the accelerator pedal (when the set speed is reached again, the displayed speed stops flashing).Operating limitsNever use the system in the following situations:–in an urban area with the risk of pedestrians crossing the road,–in heavy traffic,–on winding or steep roads,–on slippery or flooded roads,–in unfavourable climatic conditions,–driving on a speed circuit,–driving on a rolling road,–use of snow chains, non-slip covers or studded tyres.Programmable cruise controlRefer to the General recommendations on the use of driving and manoeuvring aids and to Cruise control - particular recommendations.This system automatically keeps the vehicle’s speed at the cruise value programmed by the driver (speed setting), without using the accelerator pedal.The cruise control is switched on manually.It requires a minimum vehicle speed of 25 mph (40km/h).With a manual gearbox, third gear or higher must be engaged.With an automatic gearbox, modeD or second gear or higher in modeM must be engaged.The cruise control remains active after changing gear, regardless of the gearbox type, on engines fitted with Stop & Start.Switching off the ignition cancels any speed setting.Steering mounted control1.ON (CRUISE position) / OFF (position 0)2.Activation of cruise control at the current speed / decrease speed setting3.Activation of cruise control at the current speed / increase speed setting4.Pausing / resumption of cruise control with the speed setting previously stored5.Depending on version:Display of speed thresholds recorded using Memorising speedsorUse the speed suggested by the Speed Limit Recognition and Recommendation (MEMdisplay)For more information on Memorising speedsor on the Speed Limit Recognition and Recommendation, refer to the corresponding sections.Information displayed on the instrument panel6.Cruise control mode selection indication
115Driving63.Activation of cruise control at the current speed / increase speed setting4.Pausing / resumption of cruise control with the speed setting previously stored5.Depending on version:Display of speed thresholds recorded using Memorising speedsorUse the speed suggested by the Speed Limit Recognition and Recommendation (MEMdisplay)For more information on Memorising speedsor on the Speed Limit Recognition and Recommendation, refer to the corresponding sections.Information displayed on the instrument panel6.Cruise control mode selection indication7.Cruise control pause/resume status indication8.Programmed speed setting value9.Speed suggested by the Speed Limit Recognition and RecommendationSwitching on/pausing►Turn thumbwheel1 to the "CRUISE" position to select cruise control mode; the function is paused.►Press button2 or3 to activate cruise control and save a speed setting when the vehicle has reached the desired speed; the vehicle’s current speed is saved as the speed setting.►Release the accelerator pedal.►Pressing button 4 temporarily pauses the function.►Pressing button 4 again restores operation of the cruise control (ON).Operation of the cruise control can also be paused temporarily:–by pressing the brake pedal.–automatically, if the electronic stability control (ESC) system is triggered.Changing the cruise speed settingThe cruise control must be active.To change the cruise speed setting, based on the vehicle’s current speed:►In +/-1mph (1.6 km/h) steps, briefly press button2 or3 as often as necessary.►Continuously, in steps of +/-5mph (8 km/h), press and hold button2 or3.Pressing and holding button2 or 3results in a rapid change in the speed of your vehicle.As a precaution, we recommend setting a cruise speed similar to the vehicle’s current speed, to avoid any sudden acceleration or deceleration.To change the cruise speed setting using memorised speed settings and from the touch screen:►Press button5 to display the memorised speed settings.►Press the button for the desired speed setting.
116DrivingThe selection screen closes after a few moments.This setting becomes the new cruise speed.To change the cruise speed setting using the speed suggested by the Speed Limit Recognition and Recommendation:►The suggested speed is displayed on the instrument panel.►Press button5 once; a message is displayed, confirming the memorisation request.►Press button5 again to save the suggested speed.The value is immediately shown as the new speed setting on the instrument panel.Temporarily exceeding the programmed speedIf needed (when overtaking, for example) it is possible to exceed the programmed speed by pressing the accelerator pedal.Cruise control is temporarily overridden and the programmed speed setting flashes.To return to the programmed speed, simply release the accelerator pedal.Once the vehicle has returned to the programmed speed, cruise control takes over again and the programmed speed setting stops flashing.When descending a steep hill, the cruise control system cannot prevent the vehicle from exceeding the programmed speed.You may have to brake to control the speed of your vehicle. In this case, the cruise control is automatically paused.To activate the system again, with the vehicle speed above 25 mph (40km/h), press button 4.Switching off►Turn the thumbwheel 1 to the "0” position: the cruise control information disappears from the screen.MalfunctionDashes are displayed (flashing, initially, then fixed) in the event of a cruise control system malfunction.Have the system checked by a PEUGEOT dealer or a qualified workshop.Adaptive Cruise ControlRefer to the General recommendations on the use of driving and manoeuvring aids and to Cruise control - particular recommendations.This system automatically maintains the speed of your vehicle at a value which you set (speed setting), while keeping a safe distance from the vehicle in front (target vehicle), and which has been set beforehand by the driver. The system automatically manages the acceleration and deceleration of the vehicle.With the Stop function, the system manages the braking until the vehicle comes to a complete stop.To do so, it has a camera located at the top of the windscreen and, depending on version, a radar located in the front bumper.Primarily designed for driving on main roads and motorways, this system only works with moving vehicles driving in the same direction as your vehicle.If the driver operates a direction indicator to overtake a slower vehicle, the cruise control allows the vehicle to temporarily approach the vehicle in front to assist the overtaking manoeuvre, without ever exceeding the speed setting.Some vehicles present on the road may not be properly seen or may be poorly interpreted by the camera and/or radar (e.g. a lorry), which may lead to a poor assessment of the distances and lead to the vehicle inappropriately accelerating or braking.Steering mounted control1.ON (CRUISE position) / OFF (position0)2.Activation of cruise control at the current speed / decrease speed setting3.Activation of cruise control at the current speed / increase speed setting
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131