Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2018-2019 Owner's Manual Driving Manual parking brake

96DrivingKey left in the ignitionWhen opening the driver's door, an alert message is displayed, accompanied by an audible signal, to remind you that the key is still in the ignition switch at position 1 (Stop).If the key has been left in the ignition switch at position 2 (Ignition on), the ignition will be switched off automatically after one hour.To switch the ignition back on, turn the key to position 1 (Stop), then back to position 2 (Ignition on).With Keyless Entry and Starting►With the remote control in the recognition zone, press the "START/STOP" button.With a manual gearbox, the engine switches off and the steering column locks.With the EAT8 automatic gearbox, the engine switches off.If the vehicle is not immobilised, the engine will not stop.Switching on the ignition with Keyless Entry and StartingWith the Keyless Entry and Starting system’s electronic key inside the vehicle, pressing the "START/STOP" button, with no action on the pedals, allows the ignition to be switched on.►Pressing this button again switches off the ignition and allows the vehicle to be locked.Back-up starting with Keyless Entry and StartingShould your vehicle not detect the electronic key in the recognition zone, because the remote control battery is flat, a back-up reader is provided to the left behind the steering wheel, to allow starting.►Place and hold the remote control against the reader, then:►With a manual gearbox, shift the gear lever into neutral, press the clutch pedal to the floor and keep the pedal down until the engine runs.►With an automatic gearbox, place the selector in position P then depress the brake pedal.►Then, press the "START/STOP" button.The engine starts.Forced switch-off with the Keyless Entry and StartingIn case of emergency only, the engine can be switched off without conditions (even when driving).►To do this, press the “START/STOP” button and keep it pressed for about 3 seconds.In this case, the steering column locks as soon as the vehicle stops.Remote control not recognised with Keyless Entry and StartingIf the remote control is no longer in the recognition zone, a message appears in the instrument panel when closing a door or trying to switch off the engine.►To confirm switching off the engine, press and hold the "START/STOP" button for about 3seconds, then contact a PEUGEOT dealer or a qualified workshop.Manual parking brakeApplication►With your foot on the brake pedal, pull the parking brake lever up to immobilise your vehicle.Release on level ground►With your foot on the brake pedal, pull the parking brake lever up gently, press the release button, then lower the lever fully.When the vehicle is being driven, this warning lamp coming on, accompanied by an audible signal and a message, indicates that the parking brake is still applied or has not been fully released.When parking on a slope or on a steep slope with a loaded vehicle, turn the wheels against the kerb then apply the parking brake.Pressing the brake pedal facilitates the application and release of the manual parking brake.With a manual gearbox, engage a gear and then switch off the ignition.With an automatic gearbox, place the gear selector in position P, then switch off the ignition.Electric parking brakeIn automatic mode, this system applies the parking brake when the engine is switched off and releases it when the vehicle moves off.
97Driving6Release on level ground►With your foot on the brake pedal, pull the parking brake lever up gently, press the release button, then lower the lever fully.When the vehicle is being driven, this warning lamp coming on, accompanied by an audible signal and a message, indicates that the parking brake is still applied or has not been fully released.When parking on a slope or on a steep slope with a loaded vehicle, turn the wheels against the kerb then apply the parking brake.Pressing the brake pedal facilitates the application and release of the manual parking brake.With a manual gearbox, engage a gear and then switch off the ignition.With an automatic gearbox, place the gear selector in position P, then switch off the ignition.Electric parking brakeIn automatic mode, this system applies the parking brake when the engine is switched off and releases it when the vehicle moves off.At any time, with the engine running:►to apply the parking brake, briefly pull the control lever;►to release it, briefly push the control lever while pressing the brake pedal.Automatic mode is activated by default.Indicator lampThis indicator lamp comes on in the instrument panel and on the control lever to confirm the application of the parking brake, accompanied by display of the message "Parking brake applied".It goes off to confirm the release of the parking brake.This indicator lamp flashes on the control lever when manual parking brake application or release is performed.In the event of a battery failure, the electric parking brake does not work.As a safety measure with a manual gearbox, if the parking brake is not applied, immobilise the vehicle by engaging a gear.As a safety measure with an automatic gearbox, if the parking brake is not applied, immobilise the vehicle by placing the chocks supplied against one of the wheels.Contact a PEUGEOT dealer or a qualified workshop.Before leaving the vehicle, check that the parking brake is applied: the indicator lamps in the instrument panel and the control lever must be on fixed.If the parking brake is not applied, there is an audible signal and a message is displayed on opening the driver's door.Never leave a child alone inside the vehicle as they could release the parking brake.When towing, parking on a steep slope or if the vehicle is heavily laden, turn the wheels towards the kerb and with a manual gearbox, engage a gear.When towing, parking on a steep slope, or if the vehicle is heavily laden, turn the wheels
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131