Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2018-2019 Owner's Manual Driving Manual gearbox

100DrivingThe hill start assist function cannot be deactivated. However, use of the parking brake to immobilise the vehicle interrupts its operation.OperationFacing uphill, with the vehicle stationary, the vehicle is held for a short time when you release the brake pedal:–provided you are in first gear or neutral with a manual gearbox.–provided you are in mode D or M with an automatic gearbox.Facing downhill, with the vehicle stationary and reverse gear engaged, the vehicle is held for a short time when you release the brake pedal.MalfunctionThese warning lamps come on in the event of a malfunction.Contact a PEUGEOT dealer or a qualified workshop to have the system checked.5-speed manual gearboxEngaging reverse gear►With the clutch pedal fully depressed, you must place the gear lever in neutral.►Move the gear lever to the right, then pull it back.Only engage reverse gear when the vehicle is stationary with the engine at idle.As a safety precaution and to facilitate engine starting:–always select neutral,–depress the clutch pedal.6-speed manual gearboxEngaging 5th or 6th gear►Move the gear selector fully to the right to engage 5th or 6th gear.Failure to follow this instruction could cause permanent damage to the gearbox (inadvertent engagement of 3rd or 4th gear).Engaging reverse gear►Raise the ring under the knob and move the gear lever to the left, then forwards.Only engage reverse gear when the vehicle is stationary with the engine at idle.As a safety precaution and to facilitate engine starting:–always select neutral,–depress the clutch pedal.Automatic gearbox8-speed automatic gearbox which offers a choice between the comfort of automatic operation or manual gear changing.Two driving modes are available:–Automatic operation for electronic management of the gears by the gearbox:
101Driving6Engaging reverse gear►Raise the ring under the knob and move the gear lever to the left, then forwards.Only engage reverse gear when the vehicle is stationary with the engine at idle.As a safety precaution and to facilitate engine starting:–always select neutral,–depress the clutch pedal.Automatic gearbox8-speed automatic gearbox which offers a choice between the comfort of automatic operation or manual gear changing.Two driving modes are available:–Automatic operation for electronic management of the gears by the gearbox:–Manual operation for sequential changing of the gears by the driver.In automatic mode, you can still change gear manually using the steering mounted control paddles (e.g. to overtake).Gear selectorTo turn the gear selector in complete safety, it is recommended that you keep your foot on the brake pedal.P.Park.R.Reverse.N.Neutral.D.Drive (automatic operation).M.Manual (manual operation with sequential changing of the gears).Position N can be used in traffic jams or in a car wash tunnel.Steering mounted controls►Pull the right-hand "+" or left-hand "-" control paddle towards you to change up or down. The steering mounted controls do not allow neutral to be selected and reverse gear to be engaged or disengaged.Information displayed on the instrument panelWhen you move the selector or press buttonM, the corresponding gear and indicator lamp are shown on the instrument panel.The "-" symbol is displayed if a value is invalid.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131