Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2018-2019 Owner's Manual Driving Cruise control - particular recommendations

114DrivingMalfunctionDashes are displayed (flashing, initially, then fixed) in the event of a speed limiter malfunction.Have the system checked by a PEUGEOT dealer or a qualified workshop.Cruise control - particular recommendationsFor the safety of everyone, only use the cruise control where the driving conditions allow running at a constant speed and keeping an adequate safety distance.Remain vigilant when the cruise control is activated. If you hold one of the speed setting modification buttons, a very rapid change in the speed of your vehicle may occur.When descending a steep hill, the cruise control system cannot prevent the vehicle from exceeding the set speed. Brake if necessary to control the speed of your vehicle.On steep climbs or when towing, the set speed may not be reached or maintained.Exceeding the programmed speed settingYou can temporarily exceed the speed setting by pressing the accelerator pedal (the programmed speed flashes).To return to the speed setting, release the accelerator pedal (when the set speed is reached again, the displayed speed stops flashing).Operating limitsNever use the system in the following situations:–in an urban area with the risk of pedestrians crossing the road,–in heavy traffic,–on winding or steep roads,–on slippery or flooded roads,–in unfavourable climatic conditions,–driving on a speed circuit,–driving on a rolling road,–use of snow chains, non-slip covers or studded tyres.Programmable cruise controlRefer to the General recommendations on the use of driving and manoeuvring aids and to Cruise control - particular recommendations.This system automatically keeps the vehicle’s speed at the cruise value programmed by the driver (speed setting), without using the accelerator pedal.The cruise control is switched on manually.It requires a minimum vehicle speed of 25 mph (40km/h).With a manual gearbox, third gear or higher must be engaged.With an automatic gearbox, modeD or second gear or higher in modeM must be engaged.The cruise control remains active after changing gear, regardless of the gearbox type, on engines fitted with Stop & Start.Switching off the ignition cancels any speed setting.Steering mounted control1.ON (CRUISE position) / OFF (position 0)2.Activation of cruise control at the current speed / decrease speed setting3.Activation of cruise control at the current speed / increase speed setting4.Pausing / resumption of cruise control with the speed setting previously stored5.Depending on version:Display of speed thresholds recorded using Memorising speedsorUse the speed suggested by the Speed Limit Recognition and Recommendation (MEMdisplay)For more information on Memorising speedsor on the Speed Limit Recognition and Recommendation, refer to the corresponding sections.Information displayed on the instrument panel6.Cruise control mode selection indication
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131