Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2018-2019 Owner's Manual Driving Blind Spot Monitoring System

126Driving–driving on damaged, unstable or very slippery (ice) road surfaces,–unfavourable weather conditions,–driving on a speed circuit,–driving on a rolling road.Deactivation/ Activation►Press this button to deactivate / reactivate the system at any time. Deactivation is signalled by the lighting of the indicator lamp in the button and this warning lamp in the instrument panel.The system is automatically reactivated every time the ignition is switched on.MalfunctionIn the event of a system malfunction, these warning lamps come on on the instrument panel, accompanied by an onscreen message and an audible signal.Have the system checked by a PEUGEOT dealer or a qualified workshop.Blind Spot Monitoring SystemRefer to the General recommendations on the use of driving and manoeuvring aids.This system includes sensors, placed on the sides of the bumpers, and warns the driver of the potentially dangerous presence of another vehicle (car, truck, motorcycle) in the blind spot areas of their vehicle (areas hiddenfromthe driver's field of vision).A warning lamp appears in the door mirror on the side in question:–fixed, immediately, when being overtaken;–flashing, after a delay of about one second, when overtaking a vehicle slowly, and when the direction indicator is used.Activation / DeactivationActivation or deactivation is set via the vehicle configuration menu.The system state remains in memory when the ignition is switched off.The system is automatically deactivated when towing with a towbar approved by PEUGEOT.Conditions for operation–All vehicles are moving in the same direction and in adjacent lanes.–The speed of your vehicle must be between 7 and 87 mph (12 and 140km/h).–When overtaking a vehicle, the speed difference is less than 6mph (10km/h).–When overtaken by a vehicle, the speed difference is less than 16mph (25km/h).–Traffic is flowing normally.–Overtaking a vehicle over a certain period of time and the vehicle being overtaken remains in the blind spot.–You are driving on a straight or slightly curved road.–Your vehicle is not pulling a trailer, a caravan, etc.Operating limits
127Driving6–Your vehicle is not pulling a trailer, a caravan, etc.Operating limitsNo alert is triggered in the following conditions:–In the presence of non-moving objects (parked vehicles, barriers, street lamps, road signs, etc.).–Oncoming traffic.–Driving on a winding road or a sharp corner.–When overtaking or being overtaken by a very long vehicle (lorry, bus, etc.) that is detected in the rear blind spot but is also present in the driver’s front field of vision.–When overtaking quickly.–In very heavy traffic: vehicles detected in front and behind are confused with a lorry or a stationary object.MalfunctionIf the event of malfunction, this warning lamp comes on in the instrument panel, accompanied by the display of a message.Contact a PEUGEOT dealer or a qualified workshop to have the system checked.The system may suffer temporary interference in certain weather conditions (rain, hail, etc.).In particular, driving on a wet surface or moving from a dry area to a wet area can cause false alerts (for example, the presence of a fog of water droplets in the blind spot angle is interpreted as a vehicle).In bad or wintry weather, ensure that the sensors are not covered by mud, ice or snow.Take care not to cover the warning zone in the door mirrors or the detection zones on the front and rear bumpers with adhesive labels or other objects; they may hamper correct operation of the system.Active Blind Spot Monitoring SystemIn addition to the fixed warning lamp in the door mirror on the side in question, a correction of trajectory will be felt if you attempt to cross a lane marking with the direction indicators on, to help you avoid a collision.This system is the combination of the Active Lane Keeping Assistance and Blind Spot Monitoring System.These two functions must be activated and in operation.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131