Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2018-2019 Owner's Manual Bluetooth® audio system Telephone

185Bluetooth® audio system10Press and hold one of these buttons for fast forward or rewind.Bluetooth® audio streamingStreaming allows music files on the telephone to be played via the vehicle's loudspeakers.Connect the telephone.(Refer to the "Pairing a Bluetooth® telephone" section).Activate the streaming source by pressing SOURCE.In certain cases, play of the audio files must be initiated from the keypad.Audio files can be selected using the buttons on the audio system control panel and the steering mounted controls. The contextual information can be displayed in the screen.If the telephone supports the function. The audio quality depends on the quality of transmission by the telephone.Connecting Apple® playersConnect the Apple® player to the USB port using a suitable cable (not supplied).Play starts automatically.Control is via the audio system.The classifications available are those of the portable device connected (artists / albums / genres / playlists).The version of software in the audio system may not be compatible with the generation of your Apple® player.Information and adviceThe CD player can play files with “.mp3”, “.wma”, “.wav” and “.aac” file extensions, with a bit rate of 32 to 320 Kbps.It also supports TAG mode (ID3 tag, WMA TAG).No other file types (“.mp”4, etc.) can be read.Files of the ".wma" type should be to the wma 9 standard.The sampling rates supported are 11, 22, 44 and 48 kHz.Via the USB port, the system can play audio files with the extension ".mp3”, “.wma”, “.wav”, “.cbr”, “.vbr" with a bit rate of 32 to 320 Kbps.No other file types (“.mp4”, etc.) can be read.Files of the ".wma" type should be to the wma 9 standard.The sampling rates supported are 11, 22, 44 and 48 kHz.File names should have fewer than 20 characters, avoiding special characters (e.g. «?; ù) so as to avoid any reading or display problems.In order to be able to play a burned CDR or CDRW, select standards ISO 9660 level 1, 2, or Joliet, if possible, when burning the CD.If the disc is burned in another format, it may not be played correctly.It is recommended that the same burning standard be always used on an individual disc, with the lowest speed possible (4x maximum) for the best acoustic quality.In the particular case of a multi-session CD, the Joliet standard is recommended.To protect the system, do not use a USB hub.Use only USB memory sticks formatted FAT 32 (File Allocation Table).It is recommended that you use genuine Apple® USB cables for correct operation.TelephonePairing a Bluetooth®telephoneAs a safety measure and because they require prolonged attention on the part of the driver, the operations for pairing of the Bluetooth mobile telephone with the Bluetooth hands-free system of your audio system must be carried out with the vehicle stationaryand the ignition on.Activate the telephone's Bluetooth function and ensure that it is "visible to all" (telephone configuration).
186Bluetooth® audio systemconnect / disconnect the telephone (hands-free kit and streaming).–"Delete connection": to delete the pairing.When you delete a pairing in the system, remember to delete it from your telephone as well.Press OK to confirm.Receiving a callAn incoming call is announced by a ring and a superimposed display in the screen.Select the "YES" tab in the screen using the buttons.Confirm with OK.Press this button at the steering mounted controls to accept the call.Making a callIn the "Telephone" menu.Select "Call".Select "Dial".OrSelect "Directory".OrSelect "Calls list".Confirm with OK.The services available depend on the network, the SIM card and the compatibility of the Bluetooth telephone used.Check the instructions for your telephone and with your service provider for the services to which you have access.Procedure from the telephoneSelect the name of the system in the list of devices detected.Procedure from the systemPress the MENU button.Select "Connections".Confirm with OK.Select "Search for a device".Confirm with OK.A window is displayed with a search in progress message.In the list of devices detected, select a telephone to pair. Only one telephone can be paired at a time.Completing the pairingTo complete the pairing, whichever procedure is used (from the telephone or from the system), ensure that the code is the same in the system and in the telephone.If pairing fails, the number of attempts is not restricted.A message appears in the screen confirming the pairing.Information and adviceThe "Telephone" menu gives access to the following functions in particular: "Directory", if your telephone equipment is fully compatible, "Call log", "View paired devices".Depending on the type of telephone, you may be asked to accept or confirm access by the system to each of these functions.Go to the Brand's website for more information (compatibility, more help, etc.).Managing connectionsThe telephone connection automatically includes hands free operation and audio streaming.The ability of the system to connect to just one profile depends on the telephone. Both profiles may connect by default.Press the MENU button.Select "Connections".Press OK to confirm.Select "BluetoothConnections management" and confirm. The list of paired telephones is displayed.Press OK to confirm.Indicates that a device is connected.A number indicates the profile of the connection with the system:–1 for media or 1 for telephone.–2 for media and telephone.Indicates connection of the audio steaming profile.Indicates connection of the hands-free telephone profile.Select a telephone.Press OK to confirm.Then select and confirm:–"Connect telephone" / "Disconnect telephone" : to connect / disconnect the telephone or the hands-free kit only.–"Connect media player" / "Disconnect media player" : to connect / disconnect streaming only.–"Connect telephone + media player" / "Disconnect telephone + media player" : to
187Bluetooth® audio system10connect / disconnect the telephone (hands-free kit and streaming).–"Delete connection": to delete the pairing.When you delete a pairing in the system, remember to delete it from your telephone as well.Press OK to confirm.Receiving a callAn incoming call is announced by a ring and a superimposed display in the screen.Select the "YES" tab in the screen using the buttons.Confirm with OK.Press this button at the steering mounted controls to accept the call.Making a callIn the "Telephone" menu.Select "Call".Select "Dial".OrSelect "Directory".OrSelect "Calls list".Confirm with OK.Press this button for more than two seconds for access to your directory, then navigate using the thumb wheel.Ending a callIn the "Telephone" menu.Select "End call".Confirm with OK to end the call.During a call, press one of these buttons for more than two seconds.The system accesses the telephone's contacts directory, depending on its compatibility, and while it is connected via Bluetooth.With certain telephones connected by Bluetooth you can send a contact to the directory of the audio system.Contacts imported in this way are saved in a permanent directory visible to all, whatever the telephone connected.The menu for the directory is not accessible if it is empty.Managing callsDuring a call, press OK to display the contextual menu.End callIn the contextual menu, select "Hang up" to end the call.Confirm with OK.Microphone off(so that the caller cannot hear)In the contextual menu:–select "Micro OFF" to switch off the microphone.–deselect "Micro OFF" to switch the microphone on.Confirm with OK.Telephone modeIn the contextual menu:–select "Telephone mode" to transfer the call to the telephone (for example, to leave the vehicle while continuing a conversation).–deselect "Telephone mode" to transfer the call to the vehicle.Confirm with OK.If the contact has been cut off, when you reconnect on returning to the vehicle, the Bluetooth connection will be restored automatically and sound returned to the system (depending on the compatibility of the telephone).In some cases, the Telephone mode must be activated from the telephone.
188Bluetooth® audio systemInteractive voice responseFrom the contextual menu, select "DTMF tones" and confirm to use the digital keypad to navigate in the interactive voice response menu.Confirm with OK.Consultation callFrom the contextual menu, select "Switch" and validate to return to a call left on hold.Confirm with OK.DirectoryTo access the directory, press and hold SRC/TEL.Select "Directory" to see the list of contacts.Confirm with OK.To modify the contacts saved in the system, press MENU then select "Telephone" and confirm.Select "Directory management" and confirm.You can:–"Consult an entry",–"Delete an entry",–"Delete all entries".The system accesses the telephone's contacts directory, depending on its compatibility, and while it is connected via Bluetooth.With certain telephones connected by Bluetooth you can send a contact to the directory of the audio system.Contacts imported in this way are saved in a permanent directory visible to all, whatever the telephone connected.The menu for the directory is not accessible if it is empty.Voice recognitionThis function allows you to use your smartphone's voice recognition via the system.To start voice recognition, depending on the type of steering mounted controls:Make a long press on the end of the lighting control stalk.ORPress this button.Voice recognition requires the use of a compatible smartphone first connected to the vehicle by Bluetooth.Frequently asked questionsThe following information groups together the answers to the most frequently asked questions concerning your audio system.With the engine off, the audio system switches off after a few minutes of use.When the engine is switched off, the audio system operating time depends on the state of charge of the battery.The switch-off is normal: the audio system switches to economy mode and switches off to avoid discharging the vehicle's battery.►Start the vehicle’s engine to increase the charge of the battery.The message "the audio system is overheated" is displayed onscreen.To protect the installation if the ambient temperature is too high, the audio system switches to an automatic thermal protection mode, in which the volume may be decreased or the CD player stopped.►Switch the audio system off for a few minutes to allow the system to cool.RadioThere is a difference in sound quality between the different audio sources (radio, CD, etc.).For optimal listening quality, the audio settings (Volume, Bass, Treble, Ambience and Loudness) can be adjusted to different audio sources, resulting in audible differences when switching between sources (radio, CD, etc.).►Check that the audio settings (Volume, Bass, Treble, Ambience and Loudness) are appropriate to the sources being listened to. We recommend setting the audio functions (Bass, Treble, Fr-Re
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131