Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2018-2019 Owner's Manual Access Back-up procedures

27Access2accompanied by a warning message for a few seconds, when the vehicle is moving (at speeds above 6 mph (10 km/h)), this warning lamp comes on, accompanied by an audible signal and a warning message for a few seconds.DeadlockingDeadlocking renders the exterior and interior door controls inoperative.It also deactivates the manual central control button.Therefore, never leave anyone inside the vehicle when it is deadlocked.With the keyTo deadlock the vehicle, turn the key in the driver's door lock towards the rear of the vehicle.Then within five seconds, turn the key towards the rear again.With the remote controlTo deadlock the vehicle, press this button.Then press this button again within five seconds after locking.At the same time, depending on version, the electric door mirrors fold in.If your vehicle is fitted with an alarm, pressing and holding the locking button enables the windows to be closed. The window stops in position when you release the button.With the Keyless Entry and Starting on your personTo lock the vehicle, with the remote control in recognition zone A, press on the markings of one of the front or rear door handles.To deadlock the vehicle, press the marking again within five seconds.With side-hinged doorsTo lock the vehicle, with the remote control in recognition zone A, press the left-hand door locking control.To deadlock the vehicle, press the control again within five seconds.Back-up proceduresLost keys, remote control, electronic keyGo to a PEUGEOT dealer with the vehicle's registration certificate, your personal identification documents and if possible, the label bearing the key code.The PEUGEOT dealer will be able to retrieve the key code and the transponder code, enabling a new key to be ordered.Complete unlocking/locking of the vehicle with the keyUse this procedure in the following situations:Remote control battery discharged.Remote control malfunction.Vehicle battery discharged.Vehicle in an area subject to strong electromagnetic interference.In the first case, change the remote control battery.In the second case, reinitialisethe remote control.Refer to the corresponding sections.Insert the key in the door lock.Turn the key towards the front/rear to unlock/lock the vehicle.
28AccessTurn the key rearwards again within 5seconds to deadlock the vehicle.If the vehicle is fitted with an alarm, it will not be activated when locking with the key.If the alarm is activated, the siren sounds when the door is opened; switch on the ignition to stop it.If the vehicle is unlocked with the key in the lock after locking it with the remote control or the Keyless Entry and Starting system, all doors and the boot are unlocked.If the vehicle is unlocked with the key in the lock after locking it with the key, only the doors (front door and sliding side door(s)) are unlocked. The swing doors and tailgate are not unlocked. They can be unlocked after switching on the ignition.Central locking not functioningUse these procedures in the following cases:Central locking malfunction.Battery disconnected or discharged.In the event of a malfunction of the central locking system, the battery must be disconnected to ensure that the vehicle is locked fully.Locking part of the vehicle (front passenger door/sliding side door/side-hinged doors)With a sliding side door or side-hinged doors, if fitted to your vehicle, check that the electric child lock is not activated.Open the door.Front passenger doorSliding side doorSide-hinged doorsRemove the cap located on the edge of the door.Insert the integral key into the latch (without forcing) and then turn the assembly.Remove the key and refit the cap. Close the door(s) and check from the outside that the vehicle is locked correctly.Unlocking of one part of the vehicle (front passenger door/sliding side door/side-hinged doors)Use the interior opening handle.orWith side-hinged doors, insert the integral key in the (left-hand) door lock, then turn it.For more information on the Child lockon a sliding side door or side-hinged doors, refer to the corresponding section.Unlocking the tailgateFrom inside the vehicle, insert a small screwdriver into hole A on the lock to unlock the tailgate.Move the latch to the left.
29Access2In the event of a malfunction or if you experience difficulty opening or closing the tailgate, have it checked by a PEUGEOT dealer or a qualified workshop without delay, to avoid the issue deteriorating and prevent any risk of the tailgate dropping, potentially causing serious injury.Changing the batteryIf the battery is discharged, thiswarning lamp comes on, accompanied by an audible signal and an onscreen message.Without Keyless Entry and StartingBattery type:CR2032/ 3 volts.With Keyless Entry and Starting‒ Battery type:CR2032/ 3 volts.Unclip the cover by inserting a small screwdriver in the slot and raise the cover.Remove the discharged battery from its housing.Insert the new battery, observing the polarity, and clip the cover onto the housing.Reinitialise the remote control.For more information on Reinitialising the remote control, refer to the corresponding section.Do not throw used remote control batteries away, as they contain metals that are harmful to the environment. Take them to an approved disposal point.Reinitialising the remote controlFollowing replacement of the battery or in the event of a fault, it may be necessary to reinitialise the remote control.Without Keyless Entry and StartingSwitch off the ignition.Turn the key to position 2 (Ignition on).Immediately press the closed padlock button for a few seconds.Switch off the ignition and remove the key from the ignition switch.The remote control is now fully operational again.
30AccessInsert the mechanical key (incorporated into the remote control) into the lock to open the vehicle.Place the electronic key against the back-up reader on the steering column and hold it there until the ignition is switched on.Switch on the ignition by pressing the "START/STOP" button.With a manual gearbox, place the gear lever in neutral then fully depress the clutch pedal.With an automatic gearbox, while in mode P, depress the brake pedal.If the fault persists after reinitialisation, contact a PEUGEOT dealer or a qualified workshop without delay.Central locking / unlockingThis function enables the doors to be locked or unlocked simultaneously from inside the vehicle.When locking/deadlocking from the outsideWhen the vehicle is locked or deadlocked from the outside, the indicator lamp flashes and the button is inoperative.After normal locking, pull one of the interior door controls to unlock the vehicle.After deadlocking, it is necessary to use the remote control, Keyless Entry and Starting or the integral key to unlock the vehicle.Manual modePress this button to lock / unlock the vehicle.Driving with the doors locked could make it difficult for the emergency services to enter the vehicle in an emergency.If one of the doors is open, the central locking from the inside does not function. This is signalled by a mechanical noise from the locks.If the boot is open, only the locking of the other doors is carried out. The indicator lamp in the button remains off.When locking from inside, the door mirrors do not fold.The indicator lamp also goes off when unlocking one or more accesses.Automatic modeThis is the automatic central locking of the vehicle when driving, also called anti-intrusion security.For more information on Anti-intrusion security, refer to the corresponding section.Anti-intrusion securityThis system allows automatic simultaneous locking of the doors and boot as soon as the speed of the vehicle exceeds 6 mph (10 km/h).OperationIf one of the doors or the boot is open, the automatic central locking does not take place.This is signalled by the sound of the locks rebounding, accompanied by illumination of this warning lamp in the instrument panel, an
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131