Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Rifter 2018-2019 Owner's Manual Access Alarm

33Access2AlarmSystem which protects and provides a deterrent against theft and break-ins.Self-protection functionThe system checks for the disconnection of any of its components.The alarm is triggered if the battery, button or siren wiring is disconnected or damaged.For all work on the alarm system, contact a PEUGEOT dealer or a qualified workshop.Exterior perimeterThe system checks whether the vehicle is opened.The alarm is triggered if anyone tries to open one of the doors or the bonnet.VolumetricThe system checks for any variation in volume in the passenger compartment.The alarm is triggered if anyone breaks a window, enters the passenger compartment or moves inside the vehicle.If your vehicle is fitted with Additional Heating / Ventilation, volumetric monitoring is not compatible with this system.For more information on Additional Heating / Ventilation, refer to the corresponding section.Anti-tilt monitoringThe system checks for any change in the attitude of the vehicle.The alarm is triggered if the vehicle is lifted or moved.When the vehicle is parked, the alarm will not be triggered if the vehicle is knocked.Locking the vehicle with full alarm systemActivation►Switch off the engine and exit the vehicle.►Lock the vehicle using the remote control or the "Keyless Entry and Starting" system.The monitoring system is active: the red indicator lamp in the button flashes every second and the direction indicators come on for about 2 seconds.Following an instruction to lock the vehicle, the exterior perimeter monitoring is activated after 5 seconds and the interior volumetric and anti-tilt monitoring after 45 seconds.If an opening (door, boot or bonnet) is not closed properly, the vehicle is not locked but the exterior perimeter monitoring will be activated after 45 seconds at the same time as the interior volumetric and anti-tilt monitoring.Deactivation►Press the unlocking button on the remote control.or►Unlock the vehicle with the Keyless Entry and Starting system.The monitoring system is deactivated: the indicator lamp in the button goes off and the direction indicators flash for about 2 seconds.When the vehicle automatically locks itself again (as happens if a door or the boot is not opened within 30 seconds of unlocking), the monitoring system is also reactivated automatically.
34AccessLocking the vehicle with exterior perimeter monitoring onlyDisable volumetric and anti-tilt monitoring to avoid unwanted alarm triggering in certain cases, such as:–Slightly open window or sunroof. –Washing the vehicle.–Changing a wheel.–Towing your vehicle.–Transport on a ship or ferry.Deactivating the interior volumetric and anti-tilt monitoring►Switch off the ignition and within 10 seconds press the alarm button until its red indicator lamp is on fixed.►Get out of the vehicle.►Immediately lock the vehicle using the remote control or the "Keyless Entry and Starting" system.Only the exterior perimeter monitoring is activated; the red indicator lamp in the button flashes every second.To be taken into account, the deactivation must be carried out every time the ignition is switched off.Reactivating the interior volumetric and anti-tilt monitoring►Deactivate the perimeter monitoring by unlocking the vehicle with the remote control or the Keyless Entry and Starting system.The indicator lamp in the button goes off.►Reactivate all monitoring by locking the vehicle with the remote control or the Keyless Entry and Starting system.The red indicator lamp in the button once again flashes every second.Triggering of the alarmThis is indicated by sounding of the siren and flashing of the direction indicators for 30 seconds.Depending on the country of sale, certain monitoring functions remain active until the alarm has been triggered eleven times consecutively.When the vehicle is unlocked using the remote control or the "Keyless Entry and Starting" system, rapid flashing of the red indicator lamp in the button informs you that the alarm was triggered during your absence. When the ignition is switched on, the flashing stops immediately.Failure of the remote controlTo deactivate the monitoring functions:►unlock the vehicle using the key (integral to the remote control) in the driver's door lock,►open the door; the alarm is triggered,►switch on the ignition; the alarm stops; the indicator lamp in the button goes off.Locking the vehicle without activating the alarm►Lock or deadlock the vehicle using the key (integral to the remote control) in the driver's door lock.MalfunctionWhen the ignition is switched on, fixed illumination of the red indicator lamp in the button indicates a malfunction of the system.Have it checked by a PEUGEOT dealer or a qualified workshop.Automatic activation(Depending on the country of sale)The system is activated automatically 2 minutes after the last door or the boot is closed.►To avoid triggering the alarm on entering the vehicle, first press the unlocking button on the remote control or unlock the vehicle using the “Keyless Entry and Starting” system.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131