Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Partner 2008-2018 Owner's Manual Technology on Board Frequently asked questions (RD5)

Audio and Telematics248Partner-2-VU_en_Chap10b_RD45_ed02-2016The table below gives answers to the most frequently asked questions on your audio system.QUESTIONANSWERSOLUTIONWith the engine off, the audio system switches off after a few minutes of use.When the engine is switched off, the audio system operating time depends on the state of charge of the battery.The switch-off is normal: the audio equipment switches to economy mode and switches off to prevent discharging of the vehicle's battery.Start the vehicle's engine to increase the battery charge.The message "the audio system is overheated" appears on the display.In order to protect the installation if the surrounding temperature is too high, the audio system switches to an automatic thermal protection mode leading to a reduction in volume or CD play stopping.Switch the audio system off for a few minutes to allow the system to cool.Frequently asked questionsQUESTIONANSWERSOLUTIONThere is a difference in sound quality between the different audio sources (radio, CD...).For optimum sound quality, the audio settings (Volume, Bass, Treble, Ambience, Loudness) can be adapted to the different sound sources, which may result in audible differences when changing source (radio, CD...).Check that the audio settings (Volume, Bass, Treble, Ambience, Loudness) are adapted to the sources listened to. It is advisable to set the audio functions (Bass, Treble, Front-Rear Balance, Left-Right Balance) to the middle position, select the musical ambience "None" and set the loudness correction to the "Active" position in CD mode or to the "Inactive" position in radio mode.Radio
Audio and Telematics 249TECHNOLOGY ON BOARD10Partner-2-VU_en_Chap10b_RD45_ed02-2016QUESTIONANSWERSOLUTIONThe stored stations do not function (no sound, 87.5 Mhz is displayed...).An incorrect waveband is selected.Press the BAND AST button to return to the waveband (AM, FM1, FM2, FMAST) on which the stations are stored.The traffic announcement (TA) is displayed. I do not receive any traffic information.The radio station is not part of the regional traffic information network.Tune to a radio station which broadcasts traffic information.The quality of reception of the radio station listened to gradually deteriorates or the stored stations do not function (no sound, 87.5Mhz is displayed...).The vehicle is too far from the transmitter used by the station listened to or there is no transmitter in the geographical area through which the vehicle is travelling.Activate the RDS function to enable the system to check whether there is a more powerful transmitter in the geographical area.The environment (hills, buildings, tunnels, underground car parks...) block reception, including in RDS mode.This phenomenon is normal and does not indicate a failure of the audio equipment.The aerial is absent or has been damaged (for example when going through an automatic car wash or into an underground car park).Have the aerial checked by a PEUGEOT dealer.Sound cut-outs of 1 to 2seconds in radio mode.During this brief sound cut-out, the RDS searches for another frequency giving better reception of the station.Deactivate the RDS function if the phenomenon is too frequent and always on the same route.
Audio and Telematics250Partner-2-VU_en_Chap10b_RD45_ed02-2016MediaQUESTIONANSWERSOLUTIONThe message "USB peripheral error" is displayed on the screen.The Bluetooth® connection is cut.The battery of the peripheral may not be sufficiently charged.Recharge the battery of the peripheral device.The USB memory stick is not recognised.The USB memory stick may be corrupt.Reformat the USB memory stick.The CD is ejected automatically or is not played by the player.The CD is inserted upside down, is unplayable, does not contain any audio data or contains an audio format which the player cannot play.The CD is protected by an anti-pirating protection system which is not recognised by the audio equipment.-Check that the CD is inserted in the player the right way up.-Check the condition of the CD: the CD cannot be played if it is too damaged.-Check the content in the case of a recorded CD: consult the advice in the "Audio" section.-The audio equipment's CD player does not play DVDs.-Due to their quality level, certain writeable CDs will not be played by the audio system.The CD player sound is poor.The CD used is scratched or of poor quality.Insert good quality CDs and store them in suitable conditions.The audio equipment settings (bass, treble, ambiences) are unsuitable.Set the treble or bass level to 0, without selecting an ambience.QUESTIONANSWERSOLUTIONI am unable to access my voicemail.Few telephones or service providers allow the use of this function.Telephone
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131