Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Partner 2008-2018 Owner's Manual Ready to Go Stop & Start

49READY TO GO3Partner-2-VU_en_Chap03_Pret-a-partir_ed02-2016Stop & StartSTOP & STARTThe Stop & Startsystem puts the engine temporarily on standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...).The engine restarts automatically - START mode - as soon as you want to move off.The restart takes place instantly, quickly and silently.Perfect for urban use, the Stop & Start system reduces fuel consumption and exhaust emissions as well as the noise level when stationary.OperationGoing into engine STOP modeThe "ECO" warning lamp comes on in the instrument panel and the engine goes into standby:-with a manual gearbox, at speeds below 12 mph (20 km/h), when you put the gear lever into neutral and release the clutch pedal,-with a 6-speed electronic gearbox, at speeds below 5 mph (8 km/h), when you press the brake pedal or put the gear lever into position N.If your vehicle is fitted with the system, a time counter calculates the sum of the periods in STOP mode during a journey. It rests itself to zero every time the ignition is switched on with the key.With a 6-speed electronic gearbox, for your comfort during parking manoeuvres, STOP mode is not available for a few seconds after coming out of reverse gear.STOP mode does not affect the functionality of the vehicle, such as braking, power steering, for example.Never refuel with the engine in STOP mode; you must switch off the ignition with the key.Special cases: STOP mode unavailableSTOP mode is not invoked when:-the vehicle is on a steep slope (rising or falling),-the driver's door is open,-the driver's seat belt is not fastened,-the vehicle has not exceeded 6 mph (10 km/h) since the last engine start using the key,-the engine is needed to maintain a comfortable temperature in the passenger compartment,-demisting is on,-some special conditions (battery charge, engine temperature, braking assistance, ambient temperature...) where the engine is needed to assure control of a system.In this case, the "ECO"warning lamp flashes for a few seconds, then goes off.This operation is perfectly normal.
50Partner-2-VU_en_Chap03_Pret-a-partir_ed02-2016Stop & StartGoing into engine START modeThe "ECO" warning lamp goes off and the engine starts:-with a manual gearbox, when you fully depress the clutch pedal,-with a 6-speed electronic gearbox:gear lever in position A or M, when you release the brake pedal,or gear lever in position N and the brake pedal released, when you move the gear lever to posi-tion A or M,or when you engage reverse gear.With a manual gearbox in STOP mode, if a gear is engaged without fully depressing the clutch pedal, a warning lamp comes on or a message is displayed asking you to depress the clutch pedal to restart the engine.Special cases: START invoked automaticallyFor your safety and comfort, START is invoked automatically when:-you open the driver's door,-you unfasten the driver's seat belt,-the speed of the vehicle exceeds 15 mph (25 km/h) with a manual gearbox or 7 mph (11 km/h) with the 6-speed electronic gearbox system,-some special conditions (battery charge, engine temperature, braking assistance, ambient temperature...) where the engine is needed to assure control of a system.In this case the "ECO"warning lamp flashes for fewseconds, then goes off.This operation is perfectly normal.DeactivationIn certain circumstances, such as the need to maintain a comfortable temperature in the passenger compartment, it may be preferable to deactivate Stop & Start.At any time, press the "ECOOFF"switch to deactivate the system.This is confirmed by the switch warning lamp coming on accompanied by a message in the screen.If the system has been deactivated in STOP mode, the engine restarts immediately.ReactivationPress the "ECO OFF" switch again.The system is active again; this is confirmed by the switch warning lamp going off and a message in the instrument panel.The system is reactivated automatically at every new start using the key.
51READY TO GO3Partner-2-VU_en_Chap03_Pret-a-partir_ed02-2016Stop & StartOperating faultIn the event of a malfunction with the system, the "ECOOFF" switch warning lamp flashes, then comes on continuously.have it checked by a PEUGEOT dealer or a qualified workshop.In the event of a fault in STOP mode, the vehicle may stall. All of the warning lamps in the instrument panel come on. It is then necessary to switch off the ignition and start the engine again using the key.This system requires a specific battery with a special specification and technology (reference numbers available from a PEUGEOT dealer or a qualified workshop).Fitting a battery not listed by PEUGEOTintroduces the risk of malfunction of the system.The Stop & Start system requires a battery of specific characteristics. All work on this type of battery must be done only by a PEUGEOT dealer or a qualified workshop.For more information on the 12 V battery, refer to "Battery" in section 8.Opening the bonnetBefore doing anything under the bonnet, deactivate the Stop & Start system to avoid the risk of injury related to an automatic change to START mode.Driving on flooded roadsBefore driving through a flooded road, it is strongly recommended that you deactivate the Stop & Start system.For more advice on driving, particularly on flooded roads, refer to the corresponding section.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131