Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Partner 2008-2018 Owner's Manual Ready to Go Fuel gauge

40Partner-2-VU_en_Chap03_Pret-a-partir_ed02-2016Instruments and controlsFUELGAUGECOOLANTTEMPERATUREThe needle is positioned before the red zone: normal operation.In arduous conditions of use or hot climatic conditions, the needle may move close to the red graduations.What you should do if the needle enters the red zone:Reduce your speed or let the engine run at idle.What you should do if the warning lamp comes on:-stop immediately, switch off the ignition. The fan may continue to operate for a certain time, up to approximately 10 minutes,-wait for the engine to cool down in order to check the coolant level and top it up if necessary.As the cooling system is pressurised, follow the procedure below to avoid the risk of scalding:-wait at least one hour after switching off the engine before carrying out any work,-unscrew the cap by 1/4 turn to allow the pressure to drop,-when the pressure has dropped, check the level in the header tank,-if necessary, remove the cap to topup.If the needle remains in the red zone, have the system checked by a PEUGEOT dealer or a qualified workshop.Refer to chapter 7, "Levels" section.Refer to chapter 7, "Fuel" section.The fuel level is tested each time the key is turned to the "running" position.The gauge is positioned on:-1: the fuel tank is full, approximately 60 litres.-0: the reserve is now being used, the warning lamp comes on continuously. The reserve when the warning first comes on is approximately 8 litres.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131