Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Partner 2008-2018 Owner's Manual Ready to Go 6-speed electronic gearbox

47READY TO GO3Partner-2-VU_en_Chap03_Pret-a-partir_ed02-2016Gearbox and steering wheelMoving off-To start the engine, the gear selector must be in position N.-Press firmly on the brake pedal.-Operate the starter.-When the engine is running, place the gear selector on R, A or M as desired.-Release the brake pedal and accelerate.If the gear selector is not in position N, and/or if the brake pedal is not pressed, the engine will not start. Repeat the above procedure.Reverse gearEngaging reverse gearMove the gear selector to R.Only attempt to select reverse gear when the vehicle is stationary.NeutralChanging to neutralMove the gear selector to N. If the vehicle is moving, do not select this position even momentarily.6-SPEED ELECTRONIC GEARBOx-automatic mode: gear selector in position A.-manual mode: gear selector in position M.For safety:It is only possible to come out of position N if the brake pedal is pressed.The change from position A (driving in automatic mode) to position M (driving in manual mode) or vice versa can be made at any time. The warning lamp Agoes off in the instrument panel.Mode selection
48Partner-2-VU_en_Chap03_Pret-a-partir_ed02-2016Gearbox and steering wheelManual modeChanging to manual modeMove the gear selector to M.Automatic modeChanging to automatic modeMove the gear selector to A.The gearbox then operates in automatic mode, without any action on your part.It constantly selects the gear that is best suited to the following conditions:-driving style,-road profile,-optimum fuel consumption.Vehicle stationary, with theengine runningIn the event of a prolonged stop with the engine running, the gearbox changes automatically to neutral N.Stopping the vehicleBefore stopping the engine, put the gear selector in position N.In all cases, it is essential to apply the parking brake. Check that the parking brake warning lamp is on in the instrument panel.Before doing anything in the engine compartment, check that the gear selector is in neutral N.AccelerationFor optimum acceleration (e.g. to overtake another vehicle), simply press the pedal beyond the point of resistance at the end of its travel, by pressing down firmly.Changing gearIn situations of high engine speeds (heavy acceleration), a change up will not occur unless the driver operates the electronic gearbox control paddle.Pull on the "+" control paddle to change up.Pull on the "-" control paddle to change down.-If the vehicle stops or reduces speed (for example when approaching a stop sign), the gearbox changes down automatically, to first gear if needed.-It is not necessary to release the accelerator completely during gear changes.-A gear change instruction is accepted only if the engine speed permits.-For safety reasons, depending on the engine speed, a change down may be performed automatically.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131