Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Partner 2008-2018 Owner's Manual Quick Help Changing a bulb

150Partner-2-VU_en_Chap08_Aide-rapide_ed02-2016Changing a bulbCHANGINGABULBType BBayonet bulb: press on the bulb then turn it anticlockwise.Type AAll glass bulb: pull gently as it is fitted by pressure.Type CHalogen bulb: release the retaining spring from its housing.Types of bulbVarious types of bulb are fitted to your vehicle.To remove them:Type DLight-emitting diode (LED): for replacement of the daytime running lamps, contact a PEUGEOT dealer or a qualified workshop.
151QUICK HELP8Partner-2-VU_en_Chap08_Aide-rapide_ed02-2016Changing a bulbOpen the bonnet. To access the bulbs, reach behind the headlamp unit.Carry out the operations in reverse order to refit each bulb and check that the bonnet is closed securely.Halogen bulbs must be changed with the headlamp off. Wait a few minutes (risk of serious burns). Do not touch the bulb directly with your fingers, use lint-free cloths.It is normal for condensation to form inside the headlamps. Regular use of the vehicle eliminates this misting.The bulbs must be changed with the ignition off or with the battery disconnected. Wait approximately 3minutes after changing the bulb before reconnecting the battery.Check that the lamps operate correctly after each operation.High pressure washingWhen using this type of washing on stubborn dirt, do not persist on the headlamps, the lamps and their edges to avoid damaging their coating and seals.2. SidelampsType A, W5W - 5W-Remove the cover by pulling the flexible rubber tab.-Remove the bulb holder fitted by pressure by pulling the connector.-Change the bulb.-Ensure that the cover is refitted correctly all round to assure correct sealing.Front lamps1. Dipped / Main beam headlampsType C, H4 - 55W-Remove the centre cover by pulling the flexible rubber tab.-Disconnect the electrical connector.-Release the retaining tab.-Change the bulb taking care to align the metal part with the grooves on the lamp.-Reposition the retaining tab.-Ensure that the cover is refitted correctly all round to assure correct sealing.
152Partner-2-VU_en_Chap08_Aide-rapide_ed02-2016Changing a bulb3. Direction indicatorsType B, PY21W - 21W (amber)-Remove the cover by pulling the flexible rubber tab.-Turn the bulb holder a quarter turn anticlockwise.-Remove the bulb by pressing it lightly while turning it anticlockwise.-Change the bulb.-Ensure that the cover is refitted correctly all round to assure correct sealing.4. Front foglampsType C, H1 - 55W-Remove the three clips and the screw securing the wheel arch liner, located below the bumper.-Move the wheel arch liner upwards.-Disconnect the bulb holder connector by pressing the tab at the top.-Remove the bulb holder by squeezing the two clips (at top and bottom) using a finger and thumb.-Replace the module (bulb holder and bulb).-Carry out the operations in reverse order to fit the module and refit the wheel arch liner.
153QUICK HELP8Partner-2-VU_en_Chap08_Aide-rapide_ed02-2016Changing a bulbSide repeaterType A, WY5W - 5W (amber)-Push the repeater towards the rear and disengage it by pulling the front.-Contact a PEUGEOT dealer to obtain a new repeater which is a sealed component.-To refit, engage the repeater towards the rear and bring it towards the front.Front / RearCourtesy lampsType A, 12V5W - 5W-Unclip the lens by sliding a screwdriver in the slots on each side of the courtesy lamp.-Pull the bulb out and change it.-Clip the lens in its housing and ensure that it is secured correctly.
154Partner-2-VU_en_Chap08_Aide-rapide_ed02-2016Changing a bulbThis procedure requires the use of the spanner supplied with the tools for changing a wheel.-Move aside the 4 tabs then extract the bulb holder.-Remove the faulty bulb by pressing it lightly while turning it anticlockwise.-Change the bulb.When removing the lamp unit:-with tailgate, pull the lamp unit towards the centre of the vehicle,-with hinged doors, pull the lamp unit towards you.When refitting, take care to reposition the tabs and the wiring correctly to avoid trapping the wiring.After changing the rear direction indicator bulb, the reinitialisation time is above 2 minutes.Rear lampsFor more information on bulbs, refer to the "Types of bulb".1.Brake lamps / sidelampsType B, P21/5W - 21/5W2.Direction indicatorsType B, PY21W - 21W (amber)3.Reversing lampsType B, P21W - 21W4.FoglampsType B, P21W - 21WHigh pressure jet washingWhen using this type of washing on stubborn dirt, do not persist on the headlamps, the other lamps and their edges to avoid damaging their coating and seals.Chapter 9, "Changing a wheel" section.Chapter 3, "Access" section.-Identify the failed bulb, then open the rear doors to 180°.-Remove the two fixing bolts using the spanner provided.-Pull the lamp unit from the outside.-Holding the lamp, disconnect the electrical connector.
155QUICK HELP8Partner-2-VU_en_Chap08_Aide-rapide_ed02-2016Changing a bulbNumber plate lamps-Unscrew the two nuts.-Push the pins.-If necessary, disconnect the connector to remove the lamp.-Change the bulb.Third brake lampType A, W16W - 16WType A, W5W - 5WWith tailgate-Disengage the plastic lens using a screwdriver.-Change the bulb.-Replace the plastic lens and press on it.With hinged doors-Unclip the interior trim.-Disconnect the connector by moving aside its tab.-Turn the bulb holder a quarter turn anticlockwise.-Change the bulb.-Put the bulb holder back in place and reconnect the connector.-Put the trim back in place.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131