Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Partner 2008-2018 Owner's Manual Quick Help Battery

142BatteryPartner-2-VU_en_Chap08_Aide-rapide_ed02-2016BATTERYBefore disconnecting the battery, you must wait for 2 minutes after switching off the ignition.Never disconnect a terminal when the engine is running.Never charge a battery without first disconnecting the terminals.After every reconnection of the battery, switch on the ignition and wait 1 minute before starting to allow the electronic systems to be initialised. If problems remain after doing this, please contact a PEUGEOT dealer or a qualified workshop.After changing bulbs, wait approximately 3 minutes before reconnecting the battery.It is advisable to disconnect the battery if the vehicle is not to be used for a period of more than one month.To charge the battery using a battery charger-Disconnect the battery.-Follow the instructions for use given by the battery charger manufacturer.-Reconnect starting with the negative (-) terminal.-Check that the terminals and connectors are clean. If they are covered with sulphate (white or greenish deposit), disconnect them and clean them.To start the vehicle from another battery-Connect the red cable to the positive (+) terminals of the two batteries.-Connect one end of the green or black cable to the negative (-) terminal of the slave battery.-Connect the other end of the green or black cable to an earth point on the broken down vehicle as far as possible from the battery.-Operate the starter, let the engine run.-Wait for the engine to return to idle, then disconnect the cables.The presence of this label indicates the use of a 12V lead-acid battery with special technology and specification, for which the involvement of a PEUGEOT dealer or qualified workshop is required when replacing or disconnecting the battery.Failure to observe this recommendation may cause premature wear of the battery.After refitting the battery, the Stop& Start system will only be active after several hours depending on the climatic conditions and the state of charge of the battery (up to about 8hours).The Stop & Start battery does not have to be disconnected for charging.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131