Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Partner 2008-2018 Owner's Manual Ease of Use and Comfort Steering mounted controls - Cruise control

61Steering mounted controlsEASE OF USE and COMFORT4Partner-2-VU_en_Chap04_Ergonomie_ed02-2016CRUISECONTROL"CRUISE""This is the speed at which the driver wishes to drive".This aid to driving in free-flowing traffic enables the vehicle to maintain the speed programmed by the driver, unless a steep gradient makes this impossible.For the system to be programmed or activated, the vehicle speed must be greater than 25 mph (40 km/h) with 4thgear or higher engaged.The state of the cruise control system can be seen in the instrument panel together with the the programmed speed setting.Function selected,display of the "Cruise Control" symbol.Function off,OFFFunction on.Vehicle speed above,the programmed speed flashes.Operating fault detected,OFF - the dashes flash.1.Cruise control mode On / Off.2.Reduce cruise speed setting.3.Increase cruise speed setting.4.Pause / Resume cruise control.
62Steering mounted controlsPartner-2-VU_en_Chap04_Ergonomie_ed02-2016Selecting the functionFirst activation / Programming a speedTemporarily exceeding the speed settingDeactivation (off)-Press this button or the brake or clutch pedal.Reactivation-Reach the chosen speed by pressing the accelerator.-Press the SET - or SET + button.This programmes/activates the speed setting and the vehicle will maintain this speed.-Place the switch in the CRUISEposition. The cruise control is selected but is not yet active and no speed has been programmed.It is possible to accelerate and drive momentarily at a speed greater than the programmed speed setting. The value programmed flashes.When the accelerator pedal is released, the vehicle will return to the programmed speed.-Following deactivation of the cruise control, press this button.Your vehicle will return to the last programmed speed.Alternatively, you can repeat the "first activation" procedure.
63Steering mounted controlsEASE OF USE and COMFORT4Partner-2-VU_en_Chap04_Ergonomie_ed02-2016Changing the programmed speedSwitching the system offOperating faultCancelling the programmed speed settingWhen the vehicle becomes stationary, after switching off the ignition, the system no longer memorises a speed.There are two methods of memorising a speed higher than the previous one:-Place the dial in position 0 or switch off the ignition to switch everythingoff.Good practiceWithout using the accelerator-Press the SET + button.A brief press increases the speed by 1mph (km/h).A maintained press increases the speed in steps of 5 mph (km/h).Using the accelerator-Exceed the memorised speed until the speed required is reached,-Press the SET + or SET - button.To memorise a speed lower than the previous one:-Press the SET - button.A brief press decreases the speed by 1 mph (km/h).A maintained press decreases the speed in steps of 5 mph (km/h).The programmed speed setting is cleared and replaced by three dashes. Contact a PEUGEOT dealer or a qualified workshop to have the system checked.When changing the programmed speed setting by means of a maintained press, pay attention as the speed can increase or decrease rapidly.Do not use the cruise control on slippery roads or in heavy traffic.In the event of a steep slope, the cruise control cannot prevent the vehicle from exceeding the programmed speed setting.In any event, the cruise control cannot replace the need to observe the speed limits and the need for vigilance on the part of the driver.It is advisable to keep your feet near the pedals.To avoid any jamming under the pedals:-ensure that the mat and its fixings on the floor are positioned correctly,-never place one mat on top of another.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131