Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Partner 2008-2018 Owner's Manual Ease of Use and Comfort Electric windows

89EASE OF USE and COMFORT4Partner-2-VU_en_Chap04_Ergonomie_ed02-2016Mirrors and windowsELECTRICWINDOWSSafety anti-pinchWhen the window rises and meets an obstacle, it stops and partially lowers.The electrical functions of the electric windows are deactivated:-approximately 45 seconds after the ignition is switched off,-after one of the front doors is opened, if the ignition is off.Manual modePress or pull the control, without passing the point of resistance.The window stops when you release the control.This mode is available depending on equipment; it is identified by this symbol on the control in question.1.Driver's side2.Passenger's sideReinitialisationFollowing reconnection of the battery, or in the event of a malfunction, the safety anti-pinch function must be reinitialised.Good practiceIf the electric windows meet an obstacle during operation, you must reverse the movement of the window. To do this, press the control concerned.When the driver operates the passenger electric window controls, they must ensure that no one is preventing correct closing of the windows.The driver must ensure that the passengers use the electric windows correctly.Be aware of children when operating the windows.Following several consecutive closing/opening operations of the electric window control, a protection system is triggered which only allows closing of the window. After closing, wait approximately 40 minutes. Once this time has elapsed, the control becomes operational again.Lower the window fully, then raise it, it will rise in steps of a few centimetres each time the control is pressed. Repeat the operation until the window is fully closed.Continue to press the control for at least one second after the window closed position has been reached.The safety anti-pinch does not operate during these operations.There are two operating modes:One-touch modePress or pull the control, beyond the point of resistance.The window opens or closes fully when the control is released.Pressing or pulling the control again stops the movement of the window.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131