Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Partner 1996-2008 Owner's Manual WIP Sound First steps / Menus

78 WIP Sound AUDIO EQUIPMENT/HANDS-FREE KIT CONTENTS � 01 First steps pg. 79 � 02 Displays and menus pg. 80 � 03 Audio pg. 82 � 04 Hands-free kit pg. 85 � 05 Trip computer pg. 87 � 06 Control short-cuts pg. 88 � 07 Confi guration pg. 89 � 08 Display fl ow charts pg. 91 The WIP Sound is coded in such a way that it will only operate in your vehicle. If it is to be installed in another vehicle, contact a PEUGEOT dealer for confi guration of the system. For safety reasons, the driver must carry out operations which require prolonged attention while the vehicle is stationary. When the engine is off, and in order to prevent discharging of the battery, the WIP Sound may switch off after a few minutes. The functions offered by the equipment can be found on the site: http://public.servicebox.peugeot.com - access is free. From your vehicle’s interactive telematic guide, make your selection, operate, follow the actions step by step, print. Under the "Expert mode" heading, consult the answers to the frequently asked questions.
0179 FIRST STEPS CD eject. On - Off. Volume dial. Mode: Selection of the screen display mode. Dark: Hide the screen display, until completely black, by successive presses. Pressing again reactivates the display. Source: Selection of the source; radio, CD and CD changer. Band: Selection of the FM1, FM2, FMast and AM wavebands. : Setting the audio options: Front/rear balance, left/right balance, loudness, sound ambiences. List: Displaying of the local stations, of the tracks on the CD or of the MP3 directories. - Storing of a station. - Selection of a stored radio station. - Selection of a CD in the CD changer. updating of the stations received. ESC: Abandon current operation. Menu: Displaying of the general menu. Navigator which selects the choices above or the step by step or rapid advances. Pressing the navigation dial confi rms the choice, but does not store it. A long press is required. For a detailed global view of the menus available, refer to the "Display fl ow chart" section of this chapter. BAND - AST: Storing of the 6 strongest transmitters received on FM.
8002 DISPLAY AND MENU A RADIO: RDS search, REG mode. CD: introscan, random play, repeat. VEHICLE CONFIGURATION: activation/deactivation of the equipment. DISPLAY ADJUST: year, month, day, hour, minute, 12 or 24 hour mode. > GENERAL MENU > DISPLAY A This displays the following information, via the audio equipment control pad: - the time, - the date, - the exterior temperature (this fl ashes if there is a risk of ice), - the audio source displays (radio, CD, ...), - the accesses check (doors, boot, ...), - the warning messages or information messages displayed temporarily, can be cleared by pressing the "ESC" button, - the trip computer, OPTIONS: equipment status diagnostics. Press the MENU button then OK. LANGUAGES. UNITS: temperature (°C or °F), fuel consumption (l/100, mpg or km/l).
NRJ80281 DISPLAY AND MENU C AUDIO FUNCTION: radio, CD, options. PERSONALISATION-CONFIGURATION: vehicle parameters, display, languages. TELEPHONE: hands-free kit, matching, management of a call. > GENERAL MENU > DISPLAY C This displays the following information, via the audio equipment control pad: - the time, - the date, - the exterior temperature (this fl ashes if there is a risk of ice), - the audio source displays (radio, CD, ...), - the accesses check (doors, boot, ...), - the warning messages (e.g.: "Antipollution fault") or information messages (e.g.: "Auto lighting activated") displayed temporarily, can be cleared by pressing the "ESC" button, - the trip computer, - the location of a faulty wheel, - the detection of a rear obstacle. TRIP COMPUTER: distance entering, warnings, status of functions.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131