Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Partner 1996-2008 Owner's Manual WIP Sound (Audio)

78 WIP Sound AUDIO EQUIPMENT/HANDS-FREE KIT CONTENTS � 01 First steps pg. 79 � 02 Displays and menus pg. 80 � 03 Audio pg. 82 � 04 Hands-free kit pg. 85 � 05 Trip computer pg. 87 � 06 Control short-cuts pg. 88 � 07 Confi guration pg. 89 � 08 Display fl ow charts pg. 91 The WIP Sound is coded in such a way that it will only operate in your vehicle. If it is to be installed in another vehicle, contact a PEUGEOT dealer for confi guration of the system. For safety reasons, the driver must carry out operations which require prolonged attention while the vehicle is stationary. When the engine is off, and in order to prevent discharging of the battery, the WIP Sound may switch off after a few minutes. The functions offered by the equipment can be found on the site: http://public.servicebox.peugeot.com - access is free. From your vehicle’s interactive telematic guide, make your selection, operate, follow the actions step by step, print. Under the "Expert mode" heading, consult the answers to the frequently asked questions.
0179 FIRST STEPS CD eject. On - Off. Volume dial. Mode: Selection of the screen display mode. Dark: Hide the screen display, until completely black, by successive presses. Pressing again reactivates the display. Source: Selection of the source; radio, CD and CD changer. Band: Selection of the FM1, FM2, FMast and AM wavebands. : Setting the audio options: Front/rear balance, left/right balance, loudness, sound ambiences. List: Displaying of the local stations, of the tracks on the CD or of the MP3 directories. - Storing of a station. - Selection of a stored radio station. - Selection of a CD in the CD changer. updating of the stations received. ESC: Abandon current operation. Menu: Displaying of the general menu. Navigator which selects the choices above or the step by step or rapid advances. Pressing the navigation dial confi rms the choice, but does not store it. A long press is required. For a detailed global view of the menus available, refer to the "Display fl ow chart" section of this chapter. BAND - AST: Storing of the 6 strongest transmitters received on FM.
8002 DISPLAY AND MENU A RADIO: RDS search, REG mode. CD: introscan, random play, repeat. VEHICLE CONFIGURATION: activation/deactivation of the equipment. DISPLAY ADJUST: year, month, day, hour, minute, 12 or 24 hour mode. > GENERAL MENU > DISPLAY A This displays the following information, via the audio equipment control pad: - the time, - the date, - the exterior temperature (this fl ashes if there is a risk of ice), - the audio source displays (radio, CD, ...), - the accesses check (doors, boot, ...), - the warning messages or information messages displayed temporarily, can be cleared by pressing the "ESC" button, - the trip computer, OPTIONS: equipment status diagnostics. Press the MENU button then OK. LANGUAGES. UNITS: temperature (°C or °F), fuel consumption (l/100, mpg or km/l).
NRJ80281 DISPLAY AND MENU C AUDIO FUNCTION: radio, CD, options. PERSONALISATION-CONFIGURATION: vehicle parameters, display, languages. TELEPHONE: hands-free kit, matching, management of a call. > GENERAL MENU > DISPLAY C This displays the following information, via the audio equipment control pad: - the time, - the date, - the exterior temperature (this fl ashes if there is a risk of ice), - the audio source displays (radio, CD, ...), - the accesses check (doors, boot, ...), - the warning messages (e.g.: "Antipollution fault") or information messages (e.g.: "Auto lighting activated") displayed temporarily, can be cleared by pressing the "ESC" button, - the trip computer, - the location of a faulty wheel, - the detection of a rear obstacle. TRIP COMPUTER: distance entering, warnings, status of functions.
8211223344MENU22443311 AUDIO Press the SOURCE button several times in succession and select the radio. Press the BAND AST button to select a waveband: FM1, FM2, FMast, AM. Briefl y press one of the buttons to carry out an automatic search of the radio stations. Press one of the buttons to carry out a manual search of the radio stations. Press the LIST REFRESH button to display the list of stations received locally (30 stations maximum). To update this list, press for more than two seconds. Select ACTIVATE FREQUENCY FOLLOWING (RDS) then press OK. RDS appears on the display. Select the FM WAVEBAND PREFERENCES function then press OK. Select AUDIO FUNCTIONS then press OK. Press the MENU button. ACTIVATE FREQUENCY FOLLOWING (RDS)FM WAVEBAND PREFERENCESOKOKOK The external environment (hills, buildings, tunnels, basement car parks) may block reception, including in RDS mode. This is a normal effect of the way in which radio waves are transmitted and does not indicate any failure of the audio equipment. RDS The RDS, if displayed, enables you to continue listening to the same station by means of frequency following. However, in certain conditions, this RDS station is not followed throughout the country as radio stations do not cover 100 % of the territory. This explains the loss of reception of the station during a journey. RADIO SELECTING A STATION
112283 Insert circular compact discs only. Some anti-pirating systems, on original discs or CDs copied using a personal recorder, may cause faults which are no refl ection on the quality of the original player. Without pressing the EJECT button, insert a CD in the player, play begins automatically. To play a disc which has already been inserted, press the SOURCE button several times in succession and select CD. Press one of the buttons to select a track on the CD. Press the LIST REFRESH button to display the list of tracks on the CD. CD PLAYING A CD The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio Layer 3,is an audio compression standard which permits the recording of several tens of music fi les on a single disc. The playing and displaying of an MP3 compilation may depend on the recording programme and/or the parameters used. In order to be able to play a recorded CDR or CDRW, when recording select standards ISO 9660 level 1.2 or Joliet. If the disc is recorded in another format, it may not be played correctly. It is recommended that the same recording standard is always used for an individual disc, with as low a speed as possible for optimum sound quality. In the particular case of a multi-session CD, the Joliet standard is recommended. The audio equipment will only play fi les with the extension ".mp3". No other type of fi le (.wma, .mp4...) can be played. It is advisable to restrict fi le names to 20 characters without using special characters (e.g.: " " ? ; ù) to avoid any playing or displaying problems. MP3 CD INFORMATION AND ADVICE
841122112233 Insert an MP3 compilation in the player. The audio equipment searches for all of the music tracks, which may take anything between a few seconds and several tens of seconds, before play begins. On a single disc, the CD player can read up to 255 MP3 fi les spread over 8 directory levels. However, it is advisable to keep to a limit of two levels to reduce the access time before the CD is played. To play a disc which has already been inserted, press the SOURCE button several times in succession and select CD. Press one of the buttons to select a track on the CD. Press the LIST REFRESH button to display the list of directories of the MP3 compilation. CD PLAYING AN MP3 COMPILATION * CD CHANGER - not MP3 compatible Insert the CDs in the changer one by one. Press the SOURCE button several times in succession and select CD CHANGER. Press one of the buttons on the numeric keypad to select the corresponding CD. Press and hold one of the CD changer buttons to eject the corresponding CD. Press one of the buttons to select a track on the CD. Press and hold one of the buttons for fast forwards or backwards play. Playing a CD * According to level of fi nish.
112233112255110485 HANDS-FREE KIT For safety reasons and because they require prolonged attention on the part of the driver, the operations for matching of the Bluetooth mobile telephone with the audio equipment hands-free kit must be carried out with the vehicle stationary and the ignition on. Select the accessory which corresponds to the name of the vehicle, a superimposed confi guration display appears on the multifunction display. Activate the telephone’s Bluetooth function and carry out a search of the Bluetooth accessories present for the telephone. Select the YES tab on the display using the buttons then confi rm by pressing OK. Enter the vehicle’s authentication code (=1234). Depending on the telephone, you may be asked to enter this code before the superimposed confi guration display appears. YESYES The services offered by the hands-free kit depend on the network, the SIM card and the compatibility of the Bluetooth equipment used. Consult your telephone’s manual and your operator to fi nd out which services are available to you. A list of mobile telephones which offer the best range of services is available from the network. Consult a PEUGEOT dealer. Refer to the end of the "Correct use of the hands-free kit telephone" section. RECEIVING A CALL An incoming call is announced by a ring and a superimposed display on the multifunction display. Select the YES tab on the display using the buttons and confi rm by pressing OK. Press the end of the steering wheel stalk to accept the call. Press the end of the steering wheel stalk for more than two seconds to access your directory. To dial a number, use the keypad on your telephone. MAKING A CALL MATCHING A TELEPHONE DISPLAY C
86 The matching of a new Bluetooth mobile telephone does not work while the vehicle is being driven. How many mobile telephones can be stored in the audio equipment. Is it possible to scroll through the phone book contacts more quickly than line by line. Are all of the numbers associated with a contact displayed on the audio equipment display. For safety reasons and because they require prolonged attention on the part of the driver, the operations for matching the Bluetooth mobile telephone with the audio equipment hands-free kit must be carried out with the vehicle stationary and the ignition on. Up to 4 different mobile telephones can be stored. The mobile telephone stored as 1 will be connected fi rst, then number 2, … The controls << >> on the control panel or on the steering wheel control permit direct access to the fi rst contact recorded starting with the next/previous letter of the alphabet. A maximum of 4 different numbers for one contact in Vcard format are displayed: "Home", "Work", "Mobile" and "Car".
058NRJ87 TRIP COMPUTER Each press of the button, located at the end of the wipers stalk , permits displaying of the different trip computer data in succession, depending on the display. - the "vehicle" tab with: � the range, the current consump tion and the distance remaining to the destination, - the "1" tab (route 1) with: � the average speed, the average consumption and the distance travelled calculated over route "1" , - the "2" tab (route 2) with the same characteristics for a second route . A few defi nitions Range: Displays the distance which can be travelled with the remaining fuel detected in the tank, in relation to the average consumption over the last few miles (kilometres). This displayed value may vary signifi cantly following a change in the vehicle speed or the relief of the route. When the range falls below 20 miles (30 km), dashes are displayed. After fi lling with at least 5 litres of fuel, the range is recalculated and is displayed when it exceeds 60 miles (100 km). If, whilst driving, dashes are displayed continuously in place of digits, contact a PEUGEOT dealer. Current consumption: only calculated and displayed above 20 mph (30 km/h). Average consumption: this is the average quantity of fuel consumed since the last trip recorder zero reset. Distance travelled: calculated since the last trip computer zero reset. Distance remaining to the destination: calculated with reference to the fi nal destination, entered by the user. If guidance is activated, the navigation system calculates it as a current value. Average speed: this is the average speed calculated since the last trip computer zero reset (ignition on). Zero reset When the required route is displayed, press the control for more than two seconds. VEHICLE DIAGNOSTICS DISPLAY A DISPLAY C Each press displays in succession: - Range, - Current consumption - Distance travelled, - Average consumption, - Average speed.
8806 RADIO: selection of the next stored station. CD CHANGER: selection of the next CD. Selection of the next item on a menu. RADIO: selection of the previous stored station. CD CHANGER: selection of the previous CD. Selection of the previous item on a menu. RADIO: automatic search for a higher frequency. CD/CD CHANGER/MP3: selection of the next track. CD/CD CHANGER: continuous press: fast forwards play. Selection of the previous item. RADIO: automatic search for a lower frequency. CD/CD CHANGER/MP3: selection of the previous track. CD/CD CHANGER: continuous press: fast backwards play. Selection of the next item. Volume increase. Volume decrease. CONTROL SHORT-CUTS Mute: by pressing the volume increase and decrease buttons simultaneously. The sound is restored by pressing one of the two volume buttons. - Change of sound source. - Confi rmation of a selection. - Pick up/Hang up the telephone. - Press for more than 2 seconds: access to the telephone menu. STEERING WHEEL CONTROLS
445566112233MENU0789 CONFIGURATION ADJUSTING THE DATE AND TIME Press the MENU button. Using the arrows, select the DISPLAY SETTINGS function. Press to confi rm the selection. Press to confi rm the selection. Using the arrows, select one of these functions: YEAR/MONTH/DAY/HOURS/MINUTES/12 OR 24. Adjust the parameters one by one confi rming by pressing the OK button. Next select the OK tab on the display then confi rm. OKDISPLAY SETTINGS The time-display sequence is linked to the model (version). The access to the Date is only active when the model version offers a date in words. DISPLAY A
90MENU6677881122334455 CONFIGURATION Press the MENU button. Using the arrows, select the PERSONALISATION CONFIGURATION function. Press to confi rm the selection. Using the arrows, select the DISPLAY CONFIGURATION function. Press to confi rm the selection. Press to confi rm the selection. Using the arrows, select the ADJUST DATE AND TIME function. Adjust the parameters one by one confi rming by pressing the OK button. Next select the OK tab on the display then confi rm. DISPLAY CONFIGURATIONADJUST DATE AND TIMEOKPERSONNALISATION CONFIGURATION ADJUSTING THE DATE AND TIME DISPLAY C
12332332332332331233233123312222221222222221221232308A23323391 RADIO-CD REV WIPE ACT active inactive LANGUAGES FRANCAIS ITALIANO NEDERLANDS PORTUGUES PORTUGUES-BRASIL DEUTSCH ENGLISH ESPANOL PARKING ASSIST active inactive OPTIONS DISPLAY FLOW CHART monochrome A MAIN FUNCTION * The parameters vary according to vehicle. REG MODE active inactive RDS SEARCH active inactive CHOICE A Choice A1 Choice A2 CHOICE B... INTROSCAN active inactive CD REPEAT active inactive AUTO LIGHTS active inactive GUIDE LAMPS active inactive VEHICLE CONFIG * RANDOM PLAY active inactive ABANDON/CONSULT LIST OF FAULTS functions activated (or not) warning messages DISPLAY ADJUST YEAR MONTH DAY HOUR MINUTES 12 H/24 H MODE UNITS TEMPERATURE: °CELSIUS / °FAHRENHEIT FUEL CONSUMPTION: KM/L - L/100 - MPG
92112343434234342342443444344123233221233344423434342333408 PERSONALISATION-CONFIGURATION AUDIO FUNCTIONS DISPLAY C FLOW CHART * The parameters vary according to vehicle. ** According to compatibility of Bluetooth telephone and service contract. TELEPHONE STATUS OF FUNCTIONS * functions activated or deactivated TRIP COMPUTER FM BAND PREFERENCES alternative frequencies (RDS) activate/deactivate regional mode (REG) activate/deactivate radio-text information (RDTXT) activate/deactivate AUDIO CD PREFERENCES cd changer repeat (RPT) activate/deactivate track random play (RDM) activate/deactivate ENTER DISTANCE TO DESTINATION distance: x km WARNING LOG diagnostics DEFINE THE VEHICLE PARAMETERS * DISPLAY CONFIGURATION video brightness adjustment normal video inverse video brightness (- +) adjustment date and time adjustment day/month/year adjustment hour/minute adjustment choice of 12 h/24 h mode choice of units l/100 km - mpg - km/l °Celsius/°Fahrenheit CHOICE OF LANGUAGE CONSULTING DIRECTORIES ** telephone directory call log services directory customer contact centre breakdown call emergency call CONFIGURATION deletion of a match list of matches consulting matches list of matches choice of a mobile to connect list of mobiles MANAGEMENT OF A COMMUNICATION switch** terminate the current call secret mode activate/deactivate
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131