Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Partner 1996-2008 Owner's Manual Troubleshooting Changing a wheel

122 Changing a wheel 1. PARKING THE VEHICLE - It is imperative that you ensure that the occupants get out of the vehicle and wait in a safe location. - If possible, park the vehicle on level, stable and non-slippery ground. - Apply the handbrake, switch off the ignition and engage fi rst or reverse gear. - If available, place a chock under the wheel diagonally opposite the one to be changed. If the vehicle is fi tted with a towbar; it is sometimes necessary to raise the vehicle slightly to make it easier to remove the spare wheel from its carrier. On certain types of ground and/or if considerable loads are being transported, call a PEUGEOT dealer. CHANGING A WHEEL 2. TOOLS - Open the lid of the storage compartment located under the seat on the right-hand side. If necessary, move the seat forward to access the storage compartment from the rear. - Unscrew the nut then take out the jack and the wheelbrace. 1. Wheelbrace. 2. Jack. 3. Alloy wheel embellisher remover. 4. Chock. The jack and the tool kit are specifi c to your vehicle. Do not use them for other purposes.
123TROUBLESHOOTING8 Changing a wheel 3. SPARE WHEEL - Detach the carrier from the hook and place the spare wheel near the wheel to be changed. - Unscrew the bolt using the wheelbrace until the carrier is lowered fully. - Open the rear doors to gain access to the spare wheel.
124 Changing a wheel 4. OPERATING PROCEDURE - Place the jack in contact with the locating point provided, the one which is closest to the wheel to be changed. Ensure that the jack is straight and that the base of the jack is fully in contact with the ground. - Extend the jack to lift the wheel clear of the ground. - Resume and complete the unscrewing of the wheel bolts. - Remove the bolts and remove the wheel. Do not extend the jack until you have started unscrewing the bolts on the wheel to be changed and have placed the chock under the wheel diagonally opposite. - Remove the trim pulling it using the embellisher remover. - Loosen the wheel bolts and start unscrewing them. Anti-theft bolts If your vehicle is fi tted with wheels with alloy rims: - Each wheel has an anti-theft bolt. - These bolts can be loosened using your anti-theft socket (given to you in delivery of your vehicle) and the wheelbrace.
125TROUBLESHOOTING8 Changing a wheel - Lower the vehicle completely by folding the jack, then remove the jack. - Tighten the bolts again using the wheelbrace, tighten them fully without forcing them. - Place the wheel to be repaired in the carrier. - Secure the carrier on the hook then raise the carrier using the bolt and the wheelbrace. Never go underneath a vehicle that is supported only by a jack (use a ramp). Never use a screwdriver in place of the wheelbrace 5. FITTING THE SPARE WHEEL - Position the wheel on the hub and start tightening the bolts by hand. - Carry out an initial tightening of the bolts using the wheelbrace.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131